Ubuntu
linux package

kernel hangs with earlyprintk on highbank

Bug #1034781 reported by Ike Panhc on 2012年08月09日

This bug affects 2 people

Affects		Status	Importance	Assigned to	Milestone
linux (Ubuntu)	Fix Released	High	Li Li
Quantal	Fix Released	High	Li Li

Bug Description

Starting kernel ...

Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-8-highbank (buildd@meissa) (gcc version 4.7.1 (Ubuntu/Linaro 4.7.1-6ubuntu1) ) #8-Ubuntu SMP PREEMPT Sat Aug 4 08:03:52 UTC 2012 (Ubuntu 3.5.0-8.8-highbank 3.5.0)
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Highbank, model: Calxeda Highbank
bootconsole [earlycon0] enabled
cma: CMA: reserved 16 MiB at 2e800000
Memory policy: ECC disabled, Data cache writealloc

Tags:

Related branches

lp:ubuntu/quantal/linux-ti-omap4

CVE References

2012-2340

Revision history for this message

Ike Panhc (ikepanhc) wrote on 2012年08月09日: #1

Download full text (7.6 KiB)

This does not happen on -25.40

Starting kernel ...

Booting Linux on physical CPU 0
Linux version 3.2.0-25-highbank (buildd@nihal) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #40-Ubuntu SMP PREEMPT Thu May 24 00:18:11 UTC 2012 (Ubuntu 3.2.0-25.40-highbank 3.2.18)
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Highbank, model: Calxeda Highbank
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 7 pages/cpu @c3410000 s5248 r8192 d15232 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037583
Kernel command line: console=ttyAMA0 root=UUID=b369bf8b-1985-4845-a9c6-e6c84921b0fa nosplash earlyprintk
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4089MB = 4089MB total
Memory: 4142428k/4142428k available, 44708k reserved, 3288064K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf7000000 - 0xfee00000 ( 126 MB)
lowmem : 0xc0000000 - 0xf6e00000 ( 878 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0475cf0 (4536 kB)
.init : 0xc0476000 - 0xc049c480 ( 154 kB)
.data : 0xc049e000 - 0xc04c21c0 ( 145 kB)
.bss : 0xc04c21e4 - 0xc04f7b10 ( 215 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:192
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x420000c8, AUX_CTRL 0x020b0000, Cache size: 4194304 B
Console: colour dummy device 80x30
Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
Calibrating local timer... 49.97MHz.
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Setting up static identity map for 0x368388 - 0x3683d0
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
CPU1: Unknown IPI message 0x0
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 9, mpidr 80000902
CPU2: Unknown IPI message 0x0
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 9, mpidr 80000903
Brought up 4 CPUs
SMP: Total of 4 processors activated (1592.52 BogoMIPS).
CPU3: Unknown IPI message 0x0
devtmpfs: initialized
NET: Registered protocol family 16
Unpacking initramfs...
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Serial: AMBA PL011 UART driver
fff36000.serial: ttyAMA0 at MMIO 0xfff36000 (irq = 52) is a PL011 rev3
console [ttyAMA0] enabled
bio: create slab <bio-0> at 0
SCSI subsystem initialized
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELE...

This does not happen on -25.40
Starting kernel ...
Booting Linux on physical CPU 0
Linux version 3.2.0-25-highbank (buildd@nihal) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #40-Ubuntu SMP PREEMPT Thu May 24 00:18:11 UTC 2012 (Ubuntu 3.2.0-25.40-highbank 3.2.18)
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Highbank, model: Calxeda Highbank
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 7 pages/cpu @c3410000 s5248 r8192 d15232 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037583
Kernel command line: console=ttyAMA0 root=UUID=b369bf8b-1985-4845-a9c6-e6c84921b0fa nosplash earlyprintk
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4089MB = 4089MB total
Memory: 4142428k/4142428k available, 44708k reserved, 3288064K highmem
Virtual kernel memory layout:
 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
 vmalloc : 0xf7000000 - 0xfee00000 ( 126 MB)
 lowmem : 0xc0000000 - 0xf6e00000 ( 878 MB)
 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
 .text : 0xc0008000 - 0xc0475cf0 (4536 kB)
 .init : 0xc0476000 - 0xc049c480 ( 154 kB)
 .data : 0xc049e000 - 0xc04c21c0 ( 145 kB)
 .bss : 0xc04c21e4 - 0xc04f7b10 ( 215 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:192
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x420000c8, AUX_CTRL 0x020b0000, Cache size: 4194304 B
Console: colour dummy device 80x30
Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
Calibrating local timer... 49.97MHz.
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Setting up static identity map for 0x368388 - 0x3683d0
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
CPU1: Unknown IPI message 0x0
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 9, mpidr 80000902
CPU2: Unknown IPI message 0x0
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 9, mpidr 80000903
Brought up 4 CPUs
SMP: Total of 4 processors activated (1592.52 BogoMIPS).
CPU3: Unknown IPI message 0x0
devtmpfs: initialized
NET: Registered protocol family 16
Unpacking initramfs...
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Serial: AMBA PL011 UART driver
fff36000.serial: ttyAMA0 at MMIO 0xfff36000 (irq = 52) is a PL011 rev3
console [ttyAMA0] enabled
bio: create slab <bio-0> at 0
SCSI subsystem initialized
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource timer1
AppArmor: AppArmor Filesystem Enabled
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(0.640:1): initialized
Freeing initrd memory: 1748K
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1672
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 fff3d000.dma: Cannot get operation clock.
dma-pl330: probe of fff3d000.dma failed with error -22
uart-pl011 fff36000.serial: no DMA platform data
ipmi message handler version 39.2
ipmi_si fff3a000.smic: probing via device tree
ipmi_si: Adding device-tree-specified smic state machine
IPMI System Interface driver.
ipmi_si: Trying device-tree-specified smic state machine at mem address 0xfff3a000, slave address 0x0, irq 56
ipmi_si fff3a000.smic: Using irq 56
ipmi_si fff3a000.smic: Found new BMC (man_id: 0x000444, prod_id: 0x0000, dev_id: 0x00)
ipmi_si fff3a000.smic: IPMI smic interface initialized
ahci: SSS flag set, parallel bus scan disabled
ahci ffe08000.sata: AHCI 0001.0300 32 slots 5 ports 3 Gbps 0x1f impl platform mode
ahci ffe08000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst 
scsi0 : ahci_platform
scsi1 : ahci_platform
scsi2 : ahci_platform
scsi3 : ahci_platform
scsi4 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x100 irq 115
ata2: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x180 irq 115
ata3: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x200 irq 115
ata4: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x280 irq 115
ata5: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x300 irq 115
calxedaxgmac fff50000.ethernet: (unregistered net_device): h/w version is 0x1012
calxedaxgmac fff51000.ethernet: (unregistered net_device): h/w version is 0x1012
mousedev: PS/2 mouse device common for all mice
input: ipc-keys.2 as /devices/soc.0/ipc-keys.2/input/input0
rtc-pl031 fff35000.rtc: rtc core: registered pl031 as rtc0
device-mapper: ioctl: 4.22.0-ioctl (2011年10月19日) initialised: dm-devel@redhat.com
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
oprofile: using arm/armv7-ca9
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Registering SWP/SWPB emulation handler
rtc-pl031 fff35000.rtc: setting system clock to 2012年08月09日 07:57:31 UTC (1344499051)
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: Hitachi HTS727550A9E364, JF3OA0D0, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72755 JF3O PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
Freeing init memory: 152K
Loading, please wait...
udevd[66]: starting version 175
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
init: ureadahead main process (160) terminated with status 5
Ubuntu 12.04 LTS c01 ttyAMA0
c01 login:

Revision history for this message

Ike Panhc (ikepanhc) wrote on 2012年08月09日: #2

Download full text (7.6 KiB)

precise-26.41 also fine

Starting kernel ...

Booting Linux on physical CPU 0
Linux version 3.2.0-26-highbank (buildd@nihal) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #41-Ubuntu SMP PREEMPT Thu Jun 14 20:55:11 UTC 2012 (Ubuntu 3.2.0-26.41-highbank 3.2.19)
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Highbank, model: Calxeda Highbank
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 7 pages/cpu @c3410000 s5120 r8192 d15360 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037583
Kernel command line: console=ttyAMA0 root=UUID=b369bf8b-1985-4845-a9c6-e6c84921b0fa nosplash earlyprintk
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4089MB = 4089MB total
Memory: 4141784k/4141784k available, 45352k reserved, 3288064K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf7000000 - 0xfee00000 ( 126 MB)
lowmem : 0xc0000000 - 0xf6e00000 ( 878 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0510998 (5155 kB)
.init : 0xc0511000 - 0xc053c400 ( 173 kB)
.data : 0xc053e000 - 0xc05689e0 ( 171 kB)
.bss : 0xc0568a04 - 0xc059f724 ( 220 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:192
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x420000c8, AUX_CTRL 0x020b0000, Cache size: 4194304 B
Console: colour dummy device 80x30
Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
Calibrating local timer... 49.97MHz.
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Setting up static identity map for 0x3c92a8 - 0x3c92f0
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
CPU1: Unknown IPI message 0x0
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 9, mpidr 80000902
CPU2: Unknown IPI message 0x0
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 9, mpidr 80000903
Brought up 4 CPUs
SMP: Total of 4 processors activated (1592.52 BogoMIPS).
CPU3: Unknown IPI message 0x0
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Serial: AMBA PL011 UART driver
fff36000.serial: ttyAMA0 at MMIO 0xfff36000 (irq = 52) is a PL011 rev3
console [ttyAMA0] enabled
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usb...

precise-26.41 also fine
Starting kernel ...
Booting Linux on physical CPU 0
Linux version 3.2.0-26-highbank (buildd@nihal) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #41-Ubuntu SMP PREEMPT Thu Jun 14 20:55:11 UTC 2012 (Ubuntu 3.2.0-26.41-highbank 3.2.19)
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Highbank, model: Calxeda Highbank
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 7 pages/cpu @c3410000 s5120 r8192 d15360 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037583
Kernel command line: console=ttyAMA0 root=UUID=b369bf8b-1985-4845-a9c6-e6c84921b0fa nosplash earlyprintk
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4089MB = 4089MB total
Memory: 4141784k/4141784k available, 45352k reserved, 3288064K highmem
Virtual kernel memory layout:
 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
 vmalloc : 0xf7000000 - 0xfee00000 ( 126 MB)
 lowmem : 0xc0000000 - 0xf6e00000 ( 878 MB)
 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
 .text : 0xc0008000 - 0xc0510998 (5155 kB)
 .init : 0xc0511000 - 0xc053c400 ( 173 kB)
 .data : 0xc053e000 - 0xc05689e0 ( 171 kB)
 .bss : 0xc0568a04 - 0xc059f724 ( 220 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:192
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x420000c8, AUX_CTRL 0x020b0000, Cache size: 4194304 B
Console: colour dummy device 80x30
Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
Calibrating local timer... 49.97MHz.
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Setting up static identity map for 0x3c92a8 - 0x3c92f0
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
CPU1: Unknown IPI message 0x0
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 9, mpidr 80000902
CPU2: Unknown IPI message 0x0
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 9, mpidr 80000903
Brought up 4 CPUs
SMP: Total of 4 processors activated (1592.52 BogoMIPS).
CPU3: Unknown IPI message 0x0
devtmpfs: initialized
print_constraints: dummy: 
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Serial: AMBA PL011 UART driver
fff36000.serial: ttyAMA0 at MMIO 0xfff36000 (irq = 52) is a PL011 rev3
console [ttyAMA0] enabled
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource timer1
AppArmor: AppArmor Filesystem Enabled
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
Freeing initrd memory: 1720K
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(0.680:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1670
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 fff3d000.dma: Cannot get operation clock.
dma-pl330: probe of fff3d000.dma failed with error -22
uart-pl011 fff36000.serial: no DMA platform data
brd: module loaded
loop: module loaded
ahci: SSS flag set, parallel bus scan disabled
ahci ffe08000.sata: AHCI 0001.0300 32 slots 5 ports 3 Gbps 0x1f impl platform mode
ahci ffe08000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst 
scsi0 : ahci_platform
scsi1 : ahci_platform
scsi2 : ahci_platform
scsi3 : ahci_platform
scsi4 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x100 irq 115
ata2: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x180 irq 115
ata3: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x200 irq 115
ata4: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x280 irq 115
ata5: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x300 irq 115
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
calxedaxgmac fff50000.ethernet: (unregistered net_device): h/w version is 0x1012
calxedaxgmac fff51000.ethernet: (unregistered net_device): h/w version is 0x1012
PPP generic driver version 2.4.2
usbcore: registered new interface driver libusual
mousedev: PS/2 mouse device common for all mice
input: ipc-keys.2 as /devices/soc.0/ipc-keys.2/input/input0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011年10月19日) initialised: dm-devel@redhat.com
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Registering SWP/SWPB emulation handler
/build/buildd/linux-3.2.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: Hitachi HTS727550A9E364, JF3OA0D0, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72755 JF3O PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
Freeing init memory: 172K
Loading, please wait...
udevd[87]: starting version 175
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
init: ureadahead main process (212) terminated with status 5
Ubuntu 12.04 LTS c01 ttyAMA0
c01 login:

Revision history for this message

Ike Panhc (ikepanhc) wrote on 2012年08月09日: #3

Download full text (8.3 KiB)

Precise-27.43 also works fine

Starting kernel ...

Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-27-highbank (buildd@ain) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #43-Ubuntu SMP PREEMPT Fri Jul 6 16:48:52 UTC 2012 (Ubuntu 3.2.0-27.43-highbank 3.2.21)
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Highbank, model: Calxeda Highbank
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 7 pages/cpu @c3410000 s5280 r8192 d15200 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037583
Kernel command line: console=ttyAMA0 root=UUID=b369bf8b-1985-4845-a9c6-e6c84921b0fa nosplash earlyprintk
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 16748544 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 4089MB = 4089MB total
Memory: 4125264k/4125264k available, 61872k reserved, 3288064K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf7000000 - 0xfee00000 ( 126 MB)
lowmem : 0xc0000000 - 0xf6e00000 ( 878 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0534ed4 (5300 kB)
.init : 0xc0535000 - 0xc05614a0 ( 178 kB)
.data : 0xc0562000 - 0xc058f840 ( 183 kB)
.bss : 0xc058f864 - 0xc05c8d24 ( 230 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:192
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x420000c8, AUX_CTRL 0x020b0000, Cache size: 4194304 B
sched_clock: 32 bits at 150MHz, resolution 6ns, wraps every 28633ms
Console: colour dummy device 80x30
Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
Calibrating local timer... 49.97MHz.
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Setting up static identity map for 0x3e5758 - 0x3e57a0
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
CPU1: Unknown IPI message 0x0
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 9, mpidr 80000902
CPU2: Unknown IPI message 0x0
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 9, mpidr 80000903
Brought up 4 CPUs
CPU3: Unknown IPI message 0x0
SMP: Total of 4 processors activated (1592.52 BogoMIPS).
devtmpfs: initialized
prin...

Precise-27.43 also works fine
Starting kernel ...
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-27-highbank (buildd@ain) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #43-Ubuntu SMP PREEMPT Fri Jul 6 16:48:52 UTC 2012 (Ubuntu 3.2.0-27.43-highbank 3.2.21)
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Highbank, model: Calxeda Highbank
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 7 pages/cpu @c3410000 s5280 r8192 d15200 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037583
Kernel command line: console=ttyAMA0 root=UUID=b369bf8b-1985-4845-a9c6-e6c84921b0fa nosplash earlyprintk
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 16748544 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 4089MB = 4089MB total
Memory: 4125264k/4125264k available, 61872k reserved, 3288064K highmem
Virtual kernel memory layout:
 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
 vmalloc : 0xf7000000 - 0xfee00000 ( 126 MB)
 lowmem : 0xc0000000 - 0xf6e00000 ( 878 MB)
 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
 .text : 0xc0008000 - 0xc0534ed4 (5300 kB)
 .init : 0xc0535000 - 0xc05614a0 ( 178 kB)
 .data : 0xc0562000 - 0xc058f840 ( 183 kB)
 .bss : 0xc058f864 - 0xc05c8d24 ( 230 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:192
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x420000c8, AUX_CTRL 0x020b0000, Cache size: 4194304 B
sched_clock: 32 bits at 150MHz, resolution 6ns, wraps every 28633ms
Console: colour dummy device 80x30
Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
Calibrating local timer... 49.97MHz.
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Setting up static identity map for 0x3e5758 - 0x3e57a0
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
CPU1: Unknown IPI message 0x0
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 9, mpidr 80000902
CPU2: Unknown IPI message 0x0
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 9, mpidr 80000903
Brought up 4 CPUs
CPU3: Unknown IPI message 0x0
SMP: Total of 4 processors activated (1592.52 BogoMIPS).
devtmpfs: initialized
print_constraints: dummy: 
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Serial: AMBA PL011 UART driver
fff36000.serial: ttyAMA0 at MMIO 0xfff36000 (irq = 52) is a PL011 rev3
console [ttyAMA0] enabled
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource timer1
AppArmor: AppArmor Filesystem Enabled
Freeing initrd memory: 1720K
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(0.670:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1638
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 fff3d000.dma: Cannot get operation clock.
dma-pl330: probe of fff3d000.dma failed with error -22
uart-pl011 fff36000.serial: no DMA platform data
brd: module loaded
loop: module loaded
ahci: SSS flag set, parallel bus scan disabled
ahci ffe08000.sata: AHCI 0001.0300 32 slots 5 ports 3 Gbps 0x1f impl platform mode
ahci ffe08000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst 
scsi0 : ahci_platform
scsi1 : ahci_platform
scsi2 : ahci_platform
scsi3 : ahci_platform
scsi4 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x100 irq 115
ata2: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x180 irq 115
ata3: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x200 irq 115
ata4: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x280 irq 115
ata5: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x300 irq 115
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
calxedaxgmac fff50000.ethernet: (unregistered net_device): h/w version is 0x1012
calxedaxgmac fff51000.ethernet: (unregistered net_device): h/w version is 0x1012
PPP generic driver version 2.4.2
usbcore: registered new interface driver libusual
mousedev: PS/2 mouse device common for all mice
input: ipc-keys.2 as /devices/soc.0/ipc-keys.2/input/input0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011年10月19日) initialised: dm-devel@redhat.com
EDAC MC: Ver: 2.1.0
EDAC MC0: Giving out device to 'fff00000.memory-controller' 'fff00000.memory-controller': DEV (null)
EDAC DEVICE0: Giving out device to module 'fff3c200.sregs' controller '(null)': DEV 'fff3c200.sregs' (INTERRUPT)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Registering SWP/SWPB emulation handler
/build/buildd/linux-3.2.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: Hitachi HTS727550A9E364, JF3OA0D0, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72755 JF3O PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
Freeing init memory: 176K
Loading, please wait...
udevd[90]: starting version 175
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
init: ureadahead main process (210) terminated with status 5
Ubuntu 12.04 LTS c01 ttyAMA0
c01 login:

Revision history for this message

Ike Panhc (ikepanhc) wrote on 2012年08月09日: #4

Download full text (8.3 KiB)

Looks like this issue only around quantal kernel

Starting kernel ...

Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-29-highbank (buildd@iara) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #46-Ubuntu SMP PREEMPT Fri Jul 27 20:03:53 UTC 2012 (Ubuntu 3.2.0-29.46-highbank 3.2.24)
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Highbank, model: Calxeda Highbank
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 7 pages/cpu @c3410000 s5280 r8192 d15200 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037583
Kernel command line: console=ttyAMA0 root=UUID=b369bf8b-1985-4845-a9c6-e6c84921b0fa nosplash earlyprintk
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 16748544 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 4089MB = 4089MB total
Memory: 4125264k/4125264k available, 61872k reserved, 3288064K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf7000000 - 0xfee00000 ( 126 MB)
lowmem : 0xc0000000 - 0xf6e00000 ( 878 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0534eec (5300 kB)
.init : 0xc0535000 - 0xc05614a0 ( 178 kB)
.data : 0xc0562000 - 0xc058f860 ( 183 kB)
.bss : 0xc058f884 - 0xc05c8d24 ( 230 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:192
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x420000c8, AUX_CTRL 0x020b0000, Cache size: 4194304 B
sched_clock: 32 bits at 150MHz, resolution 6ns, wraps every 28633ms
Console: colour dummy device 80x30
Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
Calibrating local timer... 49.97MHz.
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Setting up static identity map for 0x3e58e8 - 0x3e5930
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
CPU1: Unknown IPI message 0x0
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 9, mpidr 80000902
CPU2: Unknown IPI message 0x0
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 9, mpidr 80000903
Brought up 4 CPUs
CPU3: Unknown IPI message 0x0
SMP: Total of 4 processors activated (1592.52 BogoMIPS).
devtm...

Looks like this issue only around quantal kernel
Starting kernel ...
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-29-highbank (buildd@iara) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #46-Ubuntu SMP PREEMPT Fri Jul 27 20:03:53 UTC 2012 (Ubuntu 3.2.0-29.46-highbank 3.2.24)
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Highbank, model: Calxeda Highbank
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 7 pages/cpu @c3410000 s5280 r8192 d15200 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037583
Kernel command line: console=ttyAMA0 root=UUID=b369bf8b-1985-4845-a9c6-e6c84921b0fa nosplash earlyprintk
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 16748544 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 4089MB = 4089MB total
Memory: 4125264k/4125264k available, 61872k reserved, 3288064K highmem
Virtual kernel memory layout:
 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
 vmalloc : 0xf7000000 - 0xfee00000 ( 126 MB)
 lowmem : 0xc0000000 - 0xf6e00000 ( 878 MB)
 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
 .text : 0xc0008000 - 0xc0534eec (5300 kB)
 .init : 0xc0535000 - 0xc05614a0 ( 178 kB)
 .data : 0xc0562000 - 0xc058f860 ( 183 kB)
 .bss : 0xc058f884 - 0xc05c8d24 ( 230 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:192
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x420000c8, AUX_CTRL 0x020b0000, Cache size: 4194304 B
sched_clock: 32 bits at 150MHz, resolution 6ns, wraps every 28633ms
Console: colour dummy device 80x30
Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
Calibrating local timer... 49.97MHz.
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Setting up static identity map for 0x3e58e8 - 0x3e5930
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
CPU1: Unknown IPI message 0x0
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 9, mpidr 80000902
CPU2: Unknown IPI message 0x0
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 9, mpidr 80000903
Brought up 4 CPUs
CPU3: Unknown IPI message 0x0
SMP: Total of 4 processors activated (1592.52 BogoMIPS).
devtmpfs: initialized
print_constraints: dummy: 
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Serial: AMBA PL011 UART driver
fff36000.serial: ttyAMA0 at MMIO 0xfff36000 (irq = 52) is a PL011 rev3
console [ttyAMA0] enabled
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource timer1
AppArmor: AppArmor Filesystem Enabled
Freeing initrd memory: 1720K
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(0.660:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1638
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 fff3d000.dma: Cannot get operation clock.
dma-pl330: probe of fff3d000.dma failed with error -22
uart-pl011 fff36000.serial: no DMA platform data
brd: module loaded
loop: module loaded
ahci: SSS flag set, parallel bus scan disabled
ahci ffe08000.sata: AHCI 0001.0300 32 slots 5 ports 3 Gbps 0x1f impl platform mode
ahci ffe08000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst 
scsi0 : ahci_platform
scsi1 : ahci_platform
scsi2 : ahci_platform
scsi3 : ahci_platform
scsi4 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x100 irq 115
ata2: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x180 irq 115
ata3: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x200 irq 115
ata4: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x280 irq 115
ata5: SATA max UDMA/133 mmio [mem 0xffe08000-0xffe17fff] port 0x300 irq 115
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
calxedaxgmac fff50000.ethernet: (unregistered net_device): h/w version is 0x1012
calxedaxgmac fff51000.ethernet: (unregistered net_device): h/w version is 0x1012
PPP generic driver version 2.4.2
usbcore: registered new interface driver libusual
mousedev: PS/2 mouse device common for all mice
input: ipc-keys.2 as /devices/soc.0/ipc-keys.2/input/input0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011年10月19日) initialised: dm-devel@redhat.com
EDAC MC: Ver: 2.1.0
EDAC MC0: Giving out device to 'fff00000.memory-controller' 'fff00000.memory-controller': DEV (null)
EDAC DEVICE0: Giving out device to module 'fff3c200.sregs' controller '(null)': DEV 'fff3c200.sregs' (INTERRUPT)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Registering SWP/SWPB emulation handler
/build/buildd/linux-3.2.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: Hitachi HTS727550A9E364, JF3OA0D0, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72755 JF3O PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
Freeing init memory: 176K
Loading, please wait...
udevd[90]: starting version 175
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
init: ureadahead main process (207) terminated with status 5
Ubuntu 12.04 LTS c01 ttyAMA0
c01 login:

Ike Panhc (ikepanhc) on 2012年08月09日

Changed in linux (Ubuntu):

assignee: nobody → Li Li (lli5)

Ike Panhc (ikepanhc) on 2012年08月09日

Changed in linux (Ubuntu):

importance: Undecided → High

Revision history for this message

Li Li (lli5) wrote on 2012年08月13日: #5

There're several problems in hb kernel.
1) CONFIG_DEBUG_HIGHBANK_UART is not enabled
2) HB_DEBUG_LL_VIRT_BASE resides in vmalloc area, wasting memory
3) arch/arm/mach-highbank/include/mach/debug-macro.S uses the predefined phys/virt uart io address directly - should calculate the value from HB_DEBUG_LL_VIRT_BASE instead.

1) is critical, which ensures 0xfee36000 is mapped to 0xfff36000 so that printch works for earlyprintk.

Revision history for this message

Li Li (lli5) wrote on 2012年08月13日: #6

Ike, can you please add the following line to highbank config file? Thanks!

CONFIG_DEBUG_HIGHBANK_UART=y

Li Li (lli5) on 2012年08月13日

Changed in linux (Ubuntu):

status: Confirmed → In Progress

Revision history for this message

Launchpad Janitor (janitor) wrote on 2012年08月20日: #7

This bug was fixed in the package linux - 3.5.0-11.11

---------------
linux (3.5.0-11.11) quantal-proposed; urgency=low

[ Andy Whitcroft ]

* [Config] enable CONFIG_X86_X32=y

[ Cypress Semiconductor Corporation ]

* SAUCE: input: Cypress PS/2 Trackpad mouse driver
- LP: #978807
* SAUCE: input: Cypress PS/2 Trackpad link driver into psmouse-base
- LP: #978807

[ Dann Frazier ]

* [Config] compile the rtc-pl031 driver as static on the highbank kernel
flavour
- LP: #1035110

[ Ike Panhc ]

* [Config] Enable CONFIG_DEBUG_HIGHBANK_UART for highbank
- LP: #1034781

[ Kamal Mostafa ]

* SAUCE: input: Cypress PS/2 Trackpad code style cleanup
- LP: #978807
* SAUCE: input: Cypress PS/2 Trackpad eliminate dead code
- LP: #978807
* SAUCE: input: Cypress PS/2 Trackpad fix no-config stubs
- LP: #978807
* SAUCE: input: Cypress PS/2 Trackpad set default debug_level=0
- LP: #978807
* SAUCE: [Config] add MOUSE_PS2_CYPRESS=y
- LP: #978807

[ Kees Cook ]

* SAUCE: Yama: access task_struct->comm directly
* SAUCE: Yama: add link restrictions
* SAUCE: security: unconditionally chain to Yama LSM

[ Seth Forshee ]

* SAUCE: (drop after 3.6) irq_remap: disable IRQ remapping if any IOAPIC
lacks an IOMMU
- LP: #1034459

[ Stefan Bader ]

* (config) Enable getabis to use local package copies

[ Tim Gardner ]

* rebase to v3.5.2

[ Upstream Kernel Changes ]

* rds: set correct msg_namelen
- LP: #1031112
- CVE-2012-2340
* rebase to v3.5.2
- LP: #1027789
- LP: #1001251
-- Leann Ogasawara <email address hidden> 2012年8月16日 08:52:09 -0700

This bug was fixed in the package linux - 3.5.0-11.11
---------------
linux (3.5.0-11.11) quantal-proposed; urgency=low
 [ Andy Whitcroft ]
 * [Config] enable CONFIG_X86_X32=y
 [ Cypress Semiconductor Corporation ]
 * SAUCE: input: Cypress PS/2 Trackpad mouse driver
 - LP: #978807
 * SAUCE: input: Cypress PS/2 Trackpad link driver into psmouse-base
 - LP: #978807
 [ Dann Frazier ]
 * [Config] compile the rtc-pl031 driver as static on the highbank kernel
 flavour
 - LP: #1035110
 [ Ike Panhc ]
 * [Config] Enable CONFIG_DEBUG_HIGHBANK_UART for highbank
 - LP: #1034781
 [ Kamal Mostafa ]
 * SAUCE: input: Cypress PS/2 Trackpad code style cleanup
 - LP: #978807
 * SAUCE: input: Cypress PS/2 Trackpad eliminate dead code
 - LP: #978807
 * SAUCE: input: Cypress PS/2 Trackpad fix no-config stubs
 - LP: #978807
 * SAUCE: input: Cypress PS/2 Trackpad set default debug_level=0
 - LP: #978807
 * SAUCE: [Config] add MOUSE_PS2_CYPRESS=y
 - LP: #978807
 [ Kees Cook ]
 * SAUCE: Yama: access task_struct->comm directly
 * SAUCE: Yama: add link restrictions
 * SAUCE: security: unconditionally chain to Yama LSM
 [ Seth Forshee ]
 * SAUCE: (drop after 3.6) irq_remap: disable IRQ remapping if any IOAPIC
 lacks an IOMMU
 - LP: #1034459
 [ Stefan Bader ]
 * (config) Enable getabis to use local package copies
 [ Tim Gardner ]
 * rebase to v3.5.2
 [ Upstream Kernel Changes ]
 * rds: set correct msg_namelen
 - LP: #1031112
 - CVE-2012-2340
 * rebase to v3.5.2
 - LP: #1027789
 - LP: #1001251
 -- Leann Ogasawara <leann.ogasawara@canonical.com> 2012年8月16日 08:52:09 -0700

Changed in linux (Ubuntu Quantal):

status: In Progress → Fix Released

Revision history for this message

Adam Conrad (adconrad) wrote on 2013年05月24日: Update Released #8

The verification of this Stable Release Update has completed successfully and the package has now been released to -updates. Subsequently, the Ubuntu Stable Release Updates Team is being unsubscribed and will not receive messages about this bug report. In the event that you encounter a regression using the package from -updates please report a new bug using ubuntu-bug and tag the bug report regression-update so we can easily find any regresssions.

Juerg Haefliger (juergh) on 2025年04月18日

tags: added: kernel-daily-bug

See full activity log