Ardiuno DUE board. Sketch uploading Error

Question

I am working on Arduino UDE board in Ubuntu 18.04. I've followed following link tutorial.

https://www.arduino.cc/en/Guide/ArduinoDue#:~:text=Use%20your%20Arduino%20Due%20on%20the%20Arduino%20Desktop%20IDE,the%20Arduino%20Boards%20Manager%20page.

In Ardiuno IDE I am getting as /dev/ttyS4. Also, I've gone with follwing procedure :

sudo usermod -a -G dialout username
sudo chmod a+rw /dev/ttyS4
ls -l /dev/ttyS4

This gave the following outpit

crw-rw-rw- 1 root dialout 4, 68 Jun 17 17:26 /dev/ttyS4

And I am getting following error while uploading sketch though Ardiuno IDE :

Sketch uses 11092 bytes (2%) of program storage space. Maximum is 524288 bytes.
Forcing reset using 1200bps open/close on port /dev/ttyS4
/home/user/.arduino15/packages/arduino/tools/bossac/1.6.1-arduino/bossac -i -d --port=ttyS4 -U false -e -w -v -b /tmp/arduino_build_718911/ardiuno_to_python.ino.bin -R 
Send auto-baud
No device found on ttyS4
An error occurred while uploading the sketch
Set binary mode

I've tried following solution of decreasing baudrate to 1200 by following command line mulitple times till I get output as 1200 :

stty -F /dev/ttyS4 speed 1200 cs8 -cstopb -parenb

Still I am facing the error while uploading sketch. I've tried pressing reset and erase buttons few seconds but still not getting anything. Can anyone please help

Answer 1

The problem is solved. The cable came with my Arduino was charge only , I tried data transfer cable and it worked. This is so dumb. sorry for wasting your time.