On Wed, Apr 21, 2010 at 11:41:35AM -0400, Gerry Reno wrote:
> Pasi Kärkkäinen wrote:
>> On Sat, Apr 10, 2010 at 02:19:39PM +0300, Pasi Kärkkäinen wrote:
>> 
>>> On Fri, Apr 09, 2010 at 06:40:04PM -0700, Brandon Lamb wrote:
>>> 
>>>> Hello,
>>>>
>>>> Just did a fresh install of xen-4.0 and using the 2.6.31.13 dom0 kernel.
>>>>
>>>> I have 6 linux debian guests running, and on my host console i am
>>>> getting these errors rolling pretty constantly.
>>>>
>>>> "Attempting to checksum a non-TCP/UDP packet, dropping a protocol 1 packet"
>>>>
>>>> I tried doing the ethtool -K eth0 tx off and same thing on peth0,
>>>> using bridged mode for network config.
>>>>
>>>> Any tips? Google is failing me, im not sure what to even search for
>>>> other than "xen Attempting to checksum a non-TCP/UDP packet".
>>>>
>>>> Im wondering if this has something to do with why my guests were
>>>> seeming to have network timeout/freezing problems, I thought maybe
>>>> upgrading from 3.4 to 4.0 would magically solve it.
>>>>
>>>> 
>>> All the networking stuff is done on the dom0 Linux kernel,
>>> so Xen upgrade doesn't affect that.
>>>
>>> Although most probably you also upgraded dom0 kernel..
>>>
>>> Can you please post output of:
>>>
>>> - ethtool peth0
>>> - ethtool -i peth0
>>> - brctl show
>>> - ifconfig -a
>>>
>>> 
>>
>> And also:
>> - ethtool -k peth0
>>
>> -- Pasi
>> 
>
> Hi Pasi,
> I saw this post and I'm experiencing this checksumming problem as well. 
> The setup is eucalyptus and whenever we try to ping an 'instance' 
> machine from outside the cloud controller we see these errors. Also 
> when we try to ping from inside the instance to the public network. We 
> are running in NOVLAN mode across a bridge.
>
> Here are some details: stats from the 'node controller' (which launches 
> the instances)
>
> root@grp-01-23-02:~# ethtool eth0
> Settings for eth0:
> Supported ports: [ TP MII ]
> Supported link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Half 1000baseT/Full
> Supports auto-negotiation: Yes
> Advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Half 1000baseT/Full
> Advertised auto-negotiation: Yes
> Speed: 1000Mb/s
> Duplex: Full
> Port: MII
> PHYAD: 0
> Transceiver: internal
> Auto-negotiation: on
> Supports Wake-on: pumbg
> Wake-on: g
> Current message level: 0x00000033 (51)
> Link detected: yes
> root@grp-01-23-02:~#
> root@grp-01-23-02:~#
> root@grp-01-23-02:~# ethtool -i eth0
> driver: r8169
> version: 2.3LK-NAPI
> firmware-version:
> bus-info: .&checktime(0000,02,00,':').0
>
Ok, so Realtek NIC.
> root@grp-01-23-02:~#
> root@grp-01-23-02:~#
> root@grp-01-23-02:~# which brctl
> /usr/sbin/brctl
> You have new mail in /var/mail/root
> root@grp-01-23-02:~#
> root@grp-01-23-02:~# brctl show
> bridge name bridge id STP enabled interfaces
> br0 8000.00241d1905df no eth0
> vif3.0
> vif4.0
> tmpbridge 8000.000000000000 no
> virbr0 8000.000000000000 yes
> root@grp-01-23-02:~#
<snip>
> root@grp-01-23-02:~# ethtool -k eth0
> Offload parameters for eth0:
> Cannot get device flags: Operation not supported
> rx-checksumming: on
>
Did you try disabling rx-checksumming? 
> tx-checksumming: off
> scatter-gather: off
> tcp-segmentation-offload: off
> udp-fragmentation-offload: off
> generic-segmentation-offload: off
> generic-receive-offload: off
> large-receive-offload: off
>
> We are running ubuntu enterprise cloud 1.6 with a pv_ops dom0 kernel 
> (2.6.31.6) compiled from Jeremy's git tree back about December.
>
Ok. Did you try upgrading the dom0 kernel? 
-- Pasi
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users