Function NmbDaemon
NmbDaemon starts the NMB server:
int NmbDaemon(NmbConfigData *pConfig);
Parameters
pConfig
A pointer do the configuration data.
typedef struct
{
char cIpAddress [32];
char cSubNetMask[32];
char cHostname [16];
char cWorkgroup [16];
char cDomain [256];
int iPriority;
}NmbConfigData;cIpAddress is the used ip-address of the server. i.e. "192.168.1.10"
cSubNetMask is the used subnetmask of the server. i.e. "255.255.255.0"
cHostname is the used hostname of the server.
cWorkgroup is the used workgroup of the server. i.e. "WORKGROUP"
iPriority is the task priority of the server. (0 to 256) for default use PRIOTASK_NORMAL*4.
return value
Macro
Value Meaning NMB_ERR_NONE 0 no error NMB_ERR_SOCKET 1 socket error NMB_ERR_ISRUNNING 2 the server allready runs NMB_ERR_INIT 3 the server couln't be initialized NMB_ERR_DGRAM 4 the datagram server couln't started NMB_ERR_IPV6 5 ip V6 sockets not allowed NMB_ERR_WRONGIP 6 the ip address is wrong NMB_ERR_WRONGNET 7 the subnet mask is wrong
The NMB daemon is used for the netbios protocol. This protocol allows a host to get the names and ip addresses of all other netbios host's in the network, if no DNS server is present. The netbios protocol didn't supports the IP-V6.
Introduction
The SMB daemon
The NMB daemon
The CheckTree
Function
The
UserLogon Function
The
GetPassword Function
The
SmbInsertTreeEntry Function
The SmbInfo Function
OS-Independency
Copyright ゥ 2003 Anton Zechner