[LOGic] Com port number issue

Sun Jun 6 19:21:01 EDT 2010

Do you have more than 16 serial (com) ports?? That would be a lot of serial
ports! If you don't have that many, you may be able to assign a smaller
number to the ports that you have that are showing up higher than 16.....
Rich KB9RNO
-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of James Hall
Sent: Sunday, June 06, 2010 6:06 PM
To: 'LOGic is open to all radio amateurs for discussion of LOGic logging
program'
Subject: [LOGic] Com port number issue
Hi All:

I have added several rotator controllers and each has a Com port number >16.
When I try to assign the com port of one of the rotators, I am met with no
number higher than 16. Is this just a limitation of the program or am I
supposed to see any com port available ?

If it is a limitation of the program, can it be made not to be ? Are there
other alternatives ? Stand-alone programs like LP-Rotor have a Com 9 limit.

73, Jamie
WB4YDL
=======
Email scanned by PC Tools - No viruses or spyware found.
(Email Guard: 7.0.0.18, Virus/Spyware Database: 6.15150)
http://www.pctools.com/
=======
______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.829 / Virus Database: 271.1.1/2922 - Release Date: 06/06/10
13:35:00