[LOGic] Logic8 and MicroHam MicroKeyerll

Thu Apr 16 23:47:26 EDT 2009

Let me know how it goes, Larry, with TRX-Manager. That combo worked 
like a champ here. I've since sold my MKII, because I don't need it 
with my new IC-7600, and soon I'll have a FlexRadio 3000 that'll be my 
main digital mode rig. The data path is from the rig to the MKII and 
then via the software router to whatever software you are using (LOGic, 
TRX Manager, HRD, etc). The path also works in reverse. From your 
description, I'm wondering if the problem has something to do with the 
polling interval that LOGic using with your rig. Perhaps, it's not 
getting the results of the poll so it keeps polling at more frequent 
intervals. I doubt that it is two devices in conflict, but I could be 
wrong. 
73,
Carl
N8VZ
========================
Larry Boyle wrote:
> Hi Carl, thanks for the input. Is the MicroKeyer ll the one looking at 
> the radio along with Logic8?? If I watch the cat light on the ft-1000 
> I see it getting two hits and they get closer and closer to being at 
> the same time so that is why I think it has something
> to do with two things accessing the Cat system at the same time or 
> causing some kind of collision of the data. I have TRX-Manager and 
> will give it a try but am going to work on this for awhile again.
> Larry
> KD6WI
>>> On Apr 15, 2009, at 2:49 PM, Carl J. Denbow wrote:
>>>> Larry,
>>>> The Microham router needs to define the ports you use to connect to 
>> the
>> rig. Then the LOGic needs to use those ports. The Microham router
>> software is just a vehicle used by any other program you might be 
>> using
>> to access the rig via the ports you have defined. I used a Microham
>> MKII for a while with LOGic; however, I did not access the router
>> directly with LOGic, instead I used TRX-Manager which interfaced with
>> the rig through the router software and then passed data to LOGic. It
>> worked just fine.
>>>> 73,
>>>> Carl
>> N8VZ
>> =========================
>>>> Larry Boyle wrote:
>>>>> Not sure where to ask this question here or there. What seems to be
>>> happening is that both programs are looking at the Radio Via the cat
>>> system (FT-1000D Version 6) and after awhile the logging program 
>>> seems
>>> to loose contact with the radio.
>>> Some timeout error. Should both the MicroKeyer ll and the Logic8
>>> software be looking at the radio. I think they get collisions from
>>> time to time and maybe that is what is causing to loose contact. Any
>>> thoughts on this. Thanks, Larry KD6WI
>>>>>> ______________________________________________________________
>>> LOGic mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/logic
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:LOGic at mailman.qth.net
>>>>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>>>>>>>> ______________________________________________________________
>> LOGic mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/logic
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:LOGic at mailman.qth.net
>>>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>>>>> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
>> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>>