[LOGic] Logic8 and MicroHam MicroKeyerll

Wed Apr 15 21:06:20 EDT 2009

Hi All:
I too have the very same problem with MK2R+. I have alerted Dennis to the
problem, but to date there has been no resolution.
The only real fix I have at the moment is to disable one of the transceivers
in the LOGIC8 setup menu.
73
Rich, AJ3G 
-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Larry Boyle
Sent: Wednesday, April 15, 2009 7:54 PM
To: n8vz at qth.com; LOGic is open to all radio amateurs for discussion of
LOGic logging program
Subject: Re: [LOGic] Logic8 and MicroHam MicroKeyerll
Hi Carl, thanks for the input. Is the MicroKeyer ll the one looking at 
the radio along with Logic8?? If I watch the cat light on the ft-1000 
I see it getting two hits and they get closer and closer to being at 
the same time so that is why I think it has something
to do with two things accessing the Cat system at the same time or 
causing some kind of collision of the data. I have TRX-Manager and 
will give it a try but am going to work on this for awhile again.
Larry
KD6WI
On Apr 15, 2009, at 2:49 PM, Carl J. Denbow wrote:
> Larry,
>> The Microham router needs to define the ports you use to connect to 
> the
> rig. Then the LOGic needs to use those ports. The Microham router
> software is just a vehicle used by any other program you might be 
> using
> to access the rig via the ports you have defined. I used a Microham
> MKII for a while with LOGic; however, I did not access the router
> directly with LOGic, instead I used TRX-Manager which interfaced with
> the rig through the router software and then passed data to LOGic. It
> worked just fine.
>> 73,
>> Carl
> N8VZ
> =========================
>> Larry Boyle wrote:
>> Not sure where to ask this question here or there. What seems to be
>> happening is that both programs are looking at the Radio Via the cat
>> system (FT-1000D Version 6) and after awhile the logging program 
>> seems
>> to loose contact with the radio.
>> Some timeout error. Should both the MicroKeyer ll and the Logic8
>> software be looking at the radio. I think they get collisions from
>> time to time and maybe that is what is causing to loose contact. Any
>> thoughts on this. Thanks, Larry KD6WI
>>>> ______________________________________________________________
>> LOGic mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/logic
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:LOGic at mailman.qth.net
>>>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>>>> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
>> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html