[Logic] LOGic 7 / Hamscope & PTT
Mel
[email protected]
2004年3月15日 06:57:59 -0500
The whole point of keying "through" Logic is to allow the sharing of the PTT
and CW keying lines by the 2 programs.
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Greg Fischer
> Sent: March 14, 2004 22:28
> To: [email protected]
> Subject: RE: [Logic] LOGic 7 / Hamscope & PTT
>>> Hi all.
>> Just thought I would chime in here. Mind you that no expert
> resides at this qth...hihi.
>> If you are using the terminal withing Logic to read hamscope
> data, and you are going to transmit using macros from within
> Logic, then you should set the PTT from within Logic, I think
> using the RTS line. Do not set a COM port from within
> Hamscope too. If you do and you use the same COM port, there
> will be a conflict as the port is already "open" and in use by Logic.
>> If you intend to use the macros and windows provided for
> within Hamscope, then set your PTT from there and not in Logic.
>> I often use hamscope for casual digi modes and use it's many
> available macros and just let it log the entries into Logic.
> But then I am using two monitors, one with Hamscope running
> and the other with Logic running.
>> If this doesn't help anyone...sorry for taking up the bandwidth.
>> 73
> Greg
> AB7R
>>