[Logic] LOGic 7 / Hamscope & PTT

2004年3月13日 15:13:12 -0500

OK Brad... That works... Sort of!!!
But the way I see it you are NOT using Logic to do the PTT....
What I notice when set up this way is if I open the CQ keyer form, =
Hamscope
won't work... Ie Hamscope only works if the port is NOT open by Logic =
which
seems to indicate to me that all you are doing is keying the PTT =
directly
from Hamscope.
Dennis, could you clarify how this is supposed to work please... It =
seems to
me that the PTT/CW keying link from Hamscope to Logic 7 is not working.
> -----Original Message-----
> From: [email protected]=20
> [mailto:[email protected]] On Behalf Of Brad - N8GLS
> Sent: March 13, 2004 14:25
> To: [email protected]
> Subject: RE: [Logic] LOGic 7 / Hamscope & PTT
>=20
>=20
> Hi Mel,
>=20
> Here is the text version for the benefit of others on the reflector.
>=20
> In Hamscope (I'm running v1.54) General Setup:
>=20
> PTT Control Setup
>=20
> COM Port - COM 1 (port for my RIGblaster, yours would be=20
> whatever port you've assigned for your particular interface)=20
> PTT Using - Both (yours may be RTS or DTR, whatever you setup for the
> interface)
> PTT to Logger - Check this if LOGic is the controller
> Hard Key CW Using - Mine is set to none for now, don't do=20
> much CW but that will change very soon Unused Pins High -=20
> Mine is checked
>=20
> Rig Control Setup
>=20
> COM Port - Port your rig is assigned to, mine is COM 4
> Radio - LOGic 6
> Rig Baud - 9600
>=20
> Log Program is set to LOGic 6
>=20
> That's really all there is. Knowing you (your not a novice)=20
> you probably tried to set Hamscope to work with your rig=20
> (Icoms I think) as a standalone application (i.e., not linked=20
> to LOGic). I did it first and the only parameters above that=20
> changed were "PTT to Logger", which was set to "PTT to Rig=20
> Control" and "Radio" was set to Icom 756ProII (my rig). Of=20
> course the Log Program was set to none.
>=20
> I'll send you the screen shots in a couple minutes.
>=20
> Hope this helps,
>=20
> Brad
>=20
> -----Original Message-----
> From: [email protected]=20
> [mailto:[email protected]]On
> Behalf Of Mel
> Sent: Saturday, 13 March, 2004 1:59 PM
> To: [email protected]
> Subject: RE: [Logic] LOGic 7 / Hamscope & PTT
>=20
>=20
> Please share your settings in Hamscope... Can you send me a=20
> screen shot of General Setup? (alt-print-screen)
>=20
> Send to [email protected]
>=20
> PTT works fine from Logic 7, but I can't get PTT to work from=20
> Hamscope... (everything else is fine)
>=20
> I had it working with Logic 6...
>=20
>=20
> > -----Original Message-----
> > From: [email protected]=20
> [mailto:[email protected]]=20
> > On Behalf Of Brad -=20
> N8GLS
> > Sent: March 13, 2004 13:06
> > To: LOGic Reflector
> > Subject: [Logic] LOGic 7 / Hamscope & PTT
> >
> >
> > For Mel & others using Hamscope with LOGic 7
> >
> > PTT works fine from Hamscope, both stand-alone and linked=20
> to LOGic 7. =20
> > I'm using a RIGblaster plus and it keys it just fine.
> >
> > While fooling around in LOGic I did manage to get some errors while=20
> > messing with the ports and setting up the CW and Voice/PTT.=20
> Haven't=20
> > figured out just what is going on with that yet but suffice=20
> to say for=20
> > now that Hamscope works.
> >
> > After I make sure its not operator error (that could never=20
> be, hi hi)=20
> > I'll report any other problems.
> >
> >
> > 73 de N8GLS, Brad
> >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected] http://mailman.qth.net/mailman/listinfo/logic
> >
>=20
> _______________________________________________
> LOGic mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/logic
>=20
>=20
> _______________________________________________
> LOGic mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/logic
>=20