[Logic] LOGic 7 / Hamscope & PTT

2004年3月13日 14:57:26 -0500

Okay Mel,
Just sent you the screen shot as well.
Glad your up and running !!
73, Brad
-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Mel
Sent: Saturday, 13 March, 2004 2:54 PM
To: [email protected]
Subject: RE: [Logic] LOGic 7 / Hamscope & PTT
It does as I assumed that if Logic is keying the rig that I would not have
to indicate the Com port used... Though I thought I had tried that.
I am able to get Ham scope stand-alone to work fine...
Let me try your settings... Thanks Brad
> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of Brad - N8GLS
> Sent: March 13, 2004 14:25
> To: [email protected]
> Subject: RE: [Logic] LOGic 7 / Hamscope & PTT
>>> Hi Mel,
>> Here is the text version for the benefit of others on the reflector.
>> In Hamscope (I'm running v1.54) General Setup:
>> PTT Control Setup
>> COM Port - COM 1 (port for my RIGblaster, yours would be 
> whatever port you've assigned for your particular interface) 
> PTT Using - Both (yours may be RTS or DTR, whatever you setup for the
> interface)
> PTT to Logger - Check this if LOGic is the controller
> Hard Key CW Using - Mine is set to none for now, don't do 
> much CW but that will change very soon Unused Pins High - 
> Mine is checked
>> Rig Control Setup
>> COM Port - Port your rig is assigned to, mine is COM 4
> Radio - LOGic 6
> Rig Baud - 9600
>> Log Program is set to LOGic 6
>> That's really all there is. Knowing you (your not a novice) 
> you probably tried to set Hamscope to work with your rig 
> (Icoms I think) as a standalone application (i.e., not linked 
> to LOGic). I did it first and the only parameters above that 
> changed were "PTT to Logger", which was set to "PTT to Rig 
> Control" and "Radio" was set to Icom 756ProII (my rig). Of 
> course the Log Program was set to none.
>> I'll send you the screen shots in a couple minutes.
>> Hope this helps,
>> Brad
>> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]]On
> Behalf Of Mel
> Sent: Saturday, 13 March, 2004 1:59 PM
> To: [email protected]
> Subject: RE: [Logic] LOGic 7 / Hamscope & PTT
>>> Please share your settings in Hamscope... Can you send me a 
> screen shot of General Setup? (alt-print-screen)
>> Send to [email protected]
>> PTT works fine from Logic 7, but I can't get PTT to work from 
> Hamscope... (everything else is fine)
>> I had it working with Logic 6...
>>> > -----Original Message-----
> > From: [email protected] 
> [mailto:[email protected]] 
> > On Behalf Of Brad - 
> N8GLS
> > Sent: March 13, 2004 13:06
> > To: LOGic Reflector
> > Subject: [Logic] LOGic 7 / Hamscope & PTT
> >
> >
> > For Mel & others using Hamscope with LOGic 7
> >
> > PTT works fine from Hamscope, both stand-alone and linked 
> to LOGic 7. 
> > I'm using a RIGblaster plus and it keys it just fine.
> >
> > While fooling around in LOGic I did manage to get some errors while 
> > messing with the ports and setting up the CW and Voice/PTT. 
> Haven't 
> > figured out just what is going on with that yet but suffice 
> to say for 
> > now that Hamscope works.
> >
> > After I make sure its not operator error (that could never 
> be, hi hi) 
> > I'll report any other problems.
> >
> >
> > 73 de N8GLS, Brad
> >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected] http://mailman.qth.net/mailman/listinfo/logic
> >
>> _______________________________________________
> LOGic mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/logic
>>> _______________________________________________
> LOGic mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/logic
>
_______________________________________________
LOGic mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/logic