[Logic] Icom Multiple Rigs and CI-V - Update

Mon, 3 Nov 2003 22:34:21 -0500

The 1 stop bit shouldn't be an issue... 2 should work fine... But RTS
DTR must be unclicked with the CT-17.
If you use a W1GEE the RTS must be clicked.
Glad things are working... The BBQ'd hamburgers were also "tickety-boo"
;-)
> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of Bradford J. 
> Williams - N8GLS
> Sent: November 3, 2003 21:49
> To: [email protected]
> Subject: RE: [Logic] Icom Multiple Rigs and CI-V - Update
>>> Thanks Jeff,
>> Got all to work with some help from Mel. I would think the 
> 756 and the 910 would work without a hitch. The 756Pro 
> doesn't cover the same bands as the 910 and so with both 
> having CI-V enabled they should should work just fine. When I 
> had the 746Pro and the 756Pro II tied to the same CT-17, the 
> 746 would tune, change mode, etc without any affect to the 
> 756, it was only when I spun the dial on the 756 that the two 
> rigs went into "transceive" mode and began tracking each 
> other. If your happy as it is, great. If you want to futz 
> around maybe try a few of Mels tips for stop bit (1) and no 
> RTS/DTR. I'm certainly no expert, but maybe its worth a try.
>> Thanks again for your comments,
>> 73 de Brad, N8GLS
>> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]]On
> Behalf Of Jeff Griffin
> Sent: Sunday, 02 November, 2003 5:34 PM
> To: [email protected]
> Subject: Re: [Logic] Icom Multiple Rigs and CI-V - Update
>>> I recently added an Icom 910H to my station. I have a 
> homebrew TTL to 232 cable I use, with a splitter added to 
> access both Icom's. I was suprized when I looked at a CT-17 
> schematic and saw that is nothing more then a TTL to 232 
> cable split 4 ways in a fancy box! There is a bug in Logic6 
> that Dennis knows about, he said he will fix in a future 
> release. He also told me that if I used 2 com ports with 2 
> cables it should work 100%. I noticed that if I set CI-trn 
> off on the 910 I won't affect the 756 PRO, when I make a mode 
> change to the 910. Of course I have different address' set 
> for the two rig's. So only thing that doesn't work is if I 
> tune ,change bands, mode , etc on the 910 Logic6 won't see 
> it. All else work's, including the all important QSY to a DX 
> spot, or log entry. So the bug in my opinion , is no big deal....
>> 73 Jeff kb2m
>>> ----- Original Message -----
> From: "Bradford J. Williams - N8GLS" <[email protected]>
> To: "LOGic Reflector" <[email protected]>
> Sent: Sunday, November 02, 2003 4:24 PM
> Subject: [Logic] Icom Multiple Rigs and CI-V - Update
>>> > Hi Group,
> >
> > Well its been awhile since I posted the first question on the Icom 
> > polling problem, took all the responses and here is the result:
> >
> > 1) Attempted to change baud rate on one of two radios (both 
> on radio 
> > and
> in
> > LOGic), didn't work.
> >
> > 2) Bought another CT-17, so had one CT-17 interface to the 
> 746Pro, the
> other
> > to the 756Pro II, what a mess. After hours of futzing around 
> > determined that with two CT-17 interfaces one com port 4 
> and one com 
> > port 5 they act
> as
> > if there is only one. Confused the bejesus out of me since 
> it would 
> > just keep thinking that both rigs were on com port 4, regardless of 
> > what com
> port
> > I had the other interface on (yup, double-checked the setup, etc, 
> > etc). Proved that when one was disabled in logic, the other 
> would work 
> > (did this with both, so both work). Even thought I had the 
> ports and 
> > cables and interfaces confused and so started from scratch one at a 
> > time only to come
>> > to the same result.
> >
> > So, unless I am really a dufus (which I could be, and if I 
> am please 
> > enjoy at my expense), this just isn't going to work. I think I 
> > remember that someone was using a CT-17 and a W1GEE 
> interface cable, 
> > if so, please let
> me
> > know.
> >
> > Maybe I'm getting too wrapped-up in this polling thing, after all, 
> > even if it doesn't poll the rig for real time displaying of 
> frequency 
> > it will
> still
> > log the contact with correct frequency and mode.
> >
> > Thanks to all.....
> >
> > 73 de N8GLS, Brad
> >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected] http://mailman.qth.net/mailman/listinfo/logic
>> _______________________________________________
> LOGic mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/logic
>>> _______________________________________________
> LOGic mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/logic
>