[Logic] Icom Multiple Rigs and CI-V - Update
Mel
[email protected]
Sun, 2 Nov 2003 18:13:53 -0500
Don't panic... I'm in the midst of BBQing supper here...
I'll get back to you this evening...
There ARE some problems with Icom interfacing... But ONLY for split
frequency spots... It should work fine...
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Bradford J.
> Williams - N8GLS
> Sent: November 2, 2003 16:25
> To: LOGic Reflector
> Subject: [Logic] Icom Multiple Rigs and CI-V - Update
>>> Hi Group,
>> Well its been awhile since I posted the first question on the
> Icom polling problem, took all the responses and here is the result:
>> 1) Attempted to change baud rate on one of two radios (both
> on radio and in LOGic), didn't work.
>> 2) Bought another CT-17, so had one CT-17 interface to the
> 746Pro, the other to the 756Pro II, what a mess. After hours
> of futzing around determined that with two CT-17 interfaces
> one com port 4 and one com port 5 they act as if there is
> only one. Confused the bejesus out of me since it would just
> keep thinking that both rigs were on com port 4, regardless
> of what com port I had the other interface on (yup,
> double-checked the setup, etc, etc). Proved that when one was
> disabled in logic, the other would work (did this with both,
> so both work). Even thought I had the ports and cables and
> interfaces confused and so started from scratch one at a time
> only to come to the same result.
>> So, unless I am really a dufus (which I could be, and if I am
> please enjoy at my expense), this just isn't going to work.
> I think I remember that someone was using a CT-17 and a W1GEE
> interface cable, if so, please let me know.
>> Maybe I'm getting too wrapped-up in this polling thing, after
> all, even if it doesn't poll the rig for real time displaying
> of frequency it will still log the contact with correct
> frequency and mode.
>> Thanks to all.....
>> 73 de N8GLS, Brad
>>> _______________________________________________
> LOGic mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/logic
>