[Logic] PCI serial card

2002年9月14日 06:20:41 -0700

How do I find out what kind of motherboard or chipset it has without taking
the system apart and looking for a name/numbers? Maybe there isnt away to do
that....
THis is a new 2gig system but I dont no what he used when it was built....
Well the card should be here Monday ,so hopefully I will have time to try it
out to see if it works....
My experiences with trying to avoid conflicks between com ports has always
been a nitemare, maybe that has changed with the newer plug and play
stuff.....it sure wasnt with my old ISA card..
Tnxs for the info on the site Brad, lots of info there...
73 / Steve
----- Original Message -----
Wrom: IYZUNNYCGPKYLEJGDGVCJVTLBXFGGMEPYOQKEDOTWFAOBUZ
To: <[email protected]>
Sent: Friday, September 13, 2002 6:33 PM
Subject: RE: [Logic] PCI serial card
> Okay Steve,
>> Sounds good. Below is the link to the Lava site for product support.
Just
> click on it, then navigate to "Hardware Incompatibilities" and see if your
> PC manufacturer and motherboard are listed.
>> If you experience any problems I'm sure the group can help to resolve
them.
> Its a darn good group of people......they're pretty sharp !!
>> Good Luck,
>> Brad, N8GLS
>> http://www.lavalink.com/techsupport/support_main.html
>>> -----Original Message-----
> Wrom: XUWLSZLKBRNVWWCUFPEGAUTFJMVRESKPNKMBIPBARHDMNNSKVFVWRKJVZCMHVIBGDA
> Behalf Of [email protected]
> Sent: Friday, 13 September, 2002 11:05 AM
> To: [email protected]
> Subject: Re: [Logic] PCI serial card
>>> Well I never thot about checking my chip set but on the website it says it
> uses one IRQ and will work with ME which is what im running with this
> system.....here are the specs:
>> --------------------------------------------------------------------------
--
> ----
> PCI-400HS-9 (9-pin spider cable version)
> 4 Serial, 16950 UARTs (128-byte FIFO), RS-232, plug & play card.
> Settable to COM1-COM99.
> Supports fast data transfer rates (up to 921,600 bps).
> Provides 4 DB9 (9-pin male) serial connectors via an included spider cable
> that plugs on to the back of the card.
> Uses only 1 IRQ and can share an interrupt with other plug & play devices
in
> your system.
> Designed for use with Windows 95, 98, ME, 2000, XP, NT 4.0, DOS, Linux
> kernel 2.0.xx and later & OS/2. Drivers/instructions for these operating
> systems are included.
>> Tnxs for everyones input, Hopefully it will work...
> 73 / Steve N6TT
>>> ----- Original Message -----
> Wrom: CRTNHGSWZIDREXCAXZOWCONEUQZAAFXI
> To: <[email protected]>
> Sent: Thursday, September 12, 2002 6:05 PM
> Subject: RE: [Logic] PCI serial card
>>> > If you buy a PCI com card NOT AN ISA, and it is really PCI then by
> > definition there is no IRQ sharing issue. Just make sure they have
drivers
> > for the OS you are using. I use a CHEAPY and even run it with the
WIN2000
> > driver , or did, and it works fine.
> > XP home AND pro (2 machines) and both work as it did on win98 and win2k.
> >
> >
> >
> > > -----Original Message-----
> > > Wrom:
SHJEXXIMQZUIVOTQNQEMSFDULHPQQWOYIYZUNNYCGPKYLEJGDGVCJVTLBXFGGMEPYO
> > > Behalf Of Bradford J. Williams - N8GLS
> > > Sent: Thursday, September 12, 2002 7:53 PM
> > > To: [email protected]
> > > Subject: RE: [Logic] PCI serial card
> > >
> > >
> > > Steve,
> > >
> > > I would suggest going to the Lava site and making sure your
motherboard
> is
> > > compatible with the Lava card you think you might use. I run an
> > > AMD Athlon
> > > and my chipset isn't supported for ANY of the Lava cards. Good thing
I
> > > checked before putting out the bucks. I was looking at the 4-port and
> the
> > > 8-port card before discovering the incompatibility problem. If yours
is
> > > supported, and you think you might buy one, get the board with the
newer
> > > uart, its the more expensive one. If you need the model numbers I can
> > > probably dig them up again.
> > >
> > > Ultimately I went with USB-RS232 converter cables. They are all not
the
> > > same either. I would query the group here and find someone that
> > > has the rig
> > > your planning to interface to, then get the same cable they have. I
> > > "quickly" bought a converter cable from a local computer store, it
> worked
> > > like a champ with the FT1000MP, but generated more noise than a
blender
> on
> > > VHF, it was really bad. I bought a much better designed and
> manufactured
> > > cable (quiet as a church mouse), it didn't work with the
> > > FT1000MP, but works
> > > with the TNC, RIgblaster, etc, etc. So I just use the com port for
the
> > > FT1000 and the USB converter(s) for everything else. I prefer USB
> > > for these
> > > serial devices, its fast and you don't have any IRQ problems. Others
> > > may/will disagree, its really to each his own. If you go with a com
> card
> > > other then the Lava, make sure it supports IRQ sharing.
> > >
> > > Good Luck,
> > >
> > > 73, de Brad N8GLS
> > >
> > >
> > >
> > > -----Original Message-----
> > > Wrom:
QKEDOTWFAOBUZXUWLSZLKBRNVWWCUFPEGAUTFJMVRESKPNKMBIPBARHDMNNSKVFVWR
> > > Behalf Of Julio Peralta
> > > Sent: Thursday, 12 September, 2002 6:10 AM
> > > To: [email protected]
> > > Subject: Re: [Logic] PCI serial card
> > >
> > >
> > > Check out the Lava octopus 550 card it can be found at
www.lavalink.com
> > >
> > > Julio
> > > ----- Original Message -----
> > > Wrom: KJVZCMHVIBGDADRZFS
> > > To: <[email protected]>
> > > Sent: Wednesday, September 11, 2002 7:06 PM
> > > Subject: [Logic] PCI serial card
> > >
> > >
> > > >
> > > > Well now that ive got the dual monitors working Im onto
> > > mulitiple serial
> > > > ports. I had everything working on my old system that was using a 4
> com
> > > port
> > > > ISA card but it wont work with the new system using PCI -
> > > >
> > > > Im running Windows ME on this system and I have one PCI slot left
> open.
> > > What
> > > > brand of card are you guys using to obtain 4 additional Com or
serial
> > > > ports. Where did you buy them?
> > > > Unless its easier to go USB without conflicts? Im using the two
> built
> > > in
> > > > serial ports already so Im hoping to buy a plug and play card with
out
> > > alot
> > > > of hassels setting the com ports as I dont know what im doing with
> these
> > > > dang computers...Thank God for system restore to a earlier date that
I
> > > found
> > > > out about:-)
> > > > Any help appreciated, either here or direct. 73 / Steve N6TT
> > > > [email protected]
> > > > _______________________________________________
> > > > LOGic mailing list
> > > > [email protected]
> > > > http://mailman.qth.net/mailman/listinfo/logic
> > > >
> > >
> > >
> > > _______________________________________________
> > > LOGic mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/logic
> > >
> > >
> > >
> > > _______________________________________________
> > > LOGic mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/logic
> > >
> >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
> >
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>>>> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>