[Logic] Error 10 "Syntax Error"

2002年4月20日 23:07:16 -0600

Roland:
I do not participate in 1010 and therefore do not access any screens related
to 1010.
There may be more than one problem occuring...
I randomly played with LOGIC6 until it sent me an error, which says:
Error 10 "Syntax Error" has occured in program _0NG1ALARN.GET_CW_FUNCK, line
9
I am not sure exactly what action causes it (but it seems to be mouse motion
while in LOGIC6).
Will forward to PDA for review.
Thanks and 73
Dan
K0DAN
----- Original Message -----
From: "Roland Guidry" <[email protected]>
To: <[email protected]>
Sent: Saturday, April 20, 2002 21:39
Subject: Re: [Logic] Error in Logic 6.0
> Dan, Tony, WB2JRI got it right. He spoke to Dennis at PDA and he suggested
> that we turn off the "Edit Mode" for the 1010# look up. You must go into
> "Values Awards" under setup and turn off the 'Edit list' flag for the
1010#
> field. This will of course stop the error message as it has done for me. I
> agree that this seems to be a problem in the programming code. I have
found
> no other fields that cause this problem.
>> Good Luck
>> 73, de Roland WA5CHX
>>> ----- Original Message -----
> From: "k0dan" <[email protected]>
> To: <[email protected]>
> Sent: Saturday, April 20, 2002 10:32 PM
> Subject: Re: [Logic] Error in Logic 6.0
>>> > Have had similar experience with these odd errors when the cursor passes
> > over something. Don't think it has to do with 1010 specifically...I have
> no
> > interest in that pursuit, so I neither look at it within LOGIC nor do I
> > update any files associated with it.
> >
> > I do suspect I have dragged my mouse over some OTHER reports,
> however...and
> > I suspect the error is that LOGIC is trying to find a missing database
> file,
> > and I have not created or moved it to the new LOGIC6 subdirectory.
> >
> > However I have not found the "smoking gun"...still unsure exactly what's
> the
> > cause...as long as I "ignore", the program seems to continue OK.
> >
> > GL & 73
> > Dan
> > K0DAN
> > ----- Original Message -----
> > From: "Roland Guidry" <[email protected]>
> > To: <[email protected]>
> > Sent: Saturday, April 20, 2002 06:38
> > Subject: [Logic] Error in Logic 6.0
> >
> >
> > > I am have difficulty with this new program, Logic 6.0 Build 6.0.104.
> When
> > my
> > > cursor passes over the userfield 1010#, I get an error as shown with
the
> > > attached gif pic. When I chose "no" the program exits and when
> restarted,
> > I
> > > have to perform a clean then restart.
> > >
> > > Sometime I get an error message that says "Invalid Subscript
Reference"
> > > Cancel or Ignore. If I "Ignore" program continues to run, if I cancel
I
> > get
> > > other errors reported.
> > >
> > > The file I downloaded for 1010#'s came from Win1010 using their
1010.txt
> > > file. I do not have this problem with Logic 5.
> > >
> > > Has anyone encountered this same problem. I email [email protected] on
> 4/18,
> > > no response to date.
> > >
> > > Roland, WA5CHX
> > >
> > >
> > > _______________________________________________
> > > LOGic mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/logic
> > >
> >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
> >
>>> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>