[Kenwood] Anyone using a TS-2000 for HF digital work?

Tue Aug 25 08:39:28 EDT 2009

I have a TS-2000 and picked up the SignalLink USB just before Field Day
this year. I had no problems, for me, once I set the jumpers in the
SignalLink, it was a simple plug and play to the ACC port.
How did you set the jumpers? IIRC, the directions indicated you might need
to use the included diode. I did not use it, just the hand full of
straight across wires.
--
William Brown
KB2TOY
"Doug Shields" <w4das at comcast.net> wrote on 08/24/2009 05:20:10 PM:
> I am trying to use a TS-2000 for HF digital modes. I have a
Signalink
> USB digital interface that is connected and set up exactly as instructed
in
> the Signalink documentation. I can receive and decode digital signals
very
> well. I can not get any transmit audio out to the TS-2000.
>> When I select "Tune" in Digipan, the TS-2000 goes into transmit but
> there is no indication of audio or power out. I have the Signalink
> connected through the 13 pin DIN "ACC2" connector at the back of the
> TS-2000. It seems like the radio is just not looking at that connector
for
> the transmit audio. Am I missing a setting in one of the menus?
>> Any help would be greatly appreciated. I am anxious to try out the
> digital modes. Thanks very much.

Confidentiality Notice: This electronic message and any attachments may contain confidential or privileged information, and is intended only for the individual or entity identified above as the addressee. If you are not the addressee (or the employee or agent responsible to deliver it to the addressee), or if this message has been addressed to you in error, you are hereby notified that you may not copy, forward, disclose or use any part of this message or any attachments. Please notify the sender immediately by return e-mail or telephone and delete this message from your system. 