[Kenwood] Anyone using a TS-2000 for HF digital work?

Mon Aug 24 20:23:14 EDT 2009

If memory serves - there are 2 separate PTT inputs on the ACC2 plug.
Pin 9 -mutes mic audio on PTT
Pin 13 -no mute on PTT
The no mute Pin will work, but has the unfortunate effect of unmuting the front panel mic input as well.
I thought there was a jumper that would allow audio to pass only from the rear but couldn't find it on a quick look at the manual.
I recall ending up using a rigblaster to the front plug so the station mic was disconnected during digital PTT.
73 de W1EL

Eric Lowell
Eastern Maine Electronics Inc.
48 Loon Road
Wesley ME 04686
eme.inc at starband.net
www.satnetmaine.com
--- On Mon, 8/24/09, Doug Shields <w4das at comcast.net> wrote:
> From: Doug Shields <w4das at comcast.net>
> Subject: [Kenwood] Anyone using a TS-2000 for HF digital work?
> To: Kenwood at mailman.qth.net
> Date: Monday, August 24, 2009, 5:20 PM
> Hello everyone,
>>       I am trying to use a TS-2000 for HF
> digital modes.  I have a Signalink
> USB digital interface that is connected and set up exactly
> as instructed in
> the Signalink documentation.  I can receive and decode
> digital signals very
> well.  I can not get any transmit audio out to the
> TS-2000.
>>      When I select "Tune" in Digipan,
> the TS-2000 goes into transmit but
> there is no indication of audio or power out.  I have
> the Signalink
> connected through the 13 pin DIN "ACC2" connector at the
> back of the
> TS-2000.  It seems like the radio is just not looking
> at that connector for
> the transmit audio.  Am I missing a setting in one of
> the menus?
>>      Any help would be greatly
> appreciated.  I am anxious to try out the
> digital modes.  Thanks very much.
>>>> Doug  W4DAS
>> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>