[Kenwood] Fan problem with new ts-930

Sat Jul 28 01:15:58 EDT 2007

Hi Lennie,
download the following: www.kkn.net/~k5tr/ts930fix.html.
All of the answers concerning 930s are there.
Good luck with the jewel!
Nermin S58DX 
----- Original Message ----- 
From: "Lennnie in Michigan" <tanstaafl at wingsisp.com>
To: <kenwood at mailman.qth.net>
Sent: Friday, July 27, 2007 3:10 PM
Subject: [Kenwood] Fan problem with new ts-930
> Hi all. I just joined this list at the suggestion of another 
> member. I just bought an TS930s and when it arrived the mailman had 
> not been kind to it. My 930 has a serial number of 306XXXX. There 
> are 4 wires that come out of the heat sink housing and go to the fan 
> which screws onto the back of the heat sink (Just outside where the 
> two power supply regulators are at). One wire, the light purple one 
> has broken. The white, red and black are still attached.
>>> There are four sets of contacts on the back of the fan housing. The 
> contacts at the lower left and the upper left and upper right all 
> have jumpers across them. The lower contact of the two at the lower 
> right does not have anything attached to it. The upper contact of 
> the two at the lower right has the white wire attached. I'm assuming 
> that the light purple wire gets attached to the contact next to the 
> white wire but I don't want to do that unless someone can tell me if 
> that's where it goes or not.
>> Thanks in advance for your help. Lennnie in Michigan
>> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Kenwood at mailman.qth.net
>