[Dxbase] USB Interface II and DXB

Wed Mar 19 09:20:38 EST 2008

Frank, we need a little more information on your problems. The most 
important thing is that your radio address and baud rate match up with 
the virtual port that you created using the microHam interface. Please 
tell us what you have done. The proper steps are:
1. Using the set up menu under others set your radio address (probably 
6Ah) and the CI-V Baud Rate. I use 19200 but anything down to 9600 
should work. The important thing is you know what it is.
2. Using the microHam interface router software under the Ports tab, 
assign an unused port number ie: COM5 to the Radio then click on the 
"Set" button on the right this should open another sub window where you 
can select the Icom 7800, address and baud rate.
Frank check all of these things and make sure your cable that you 
purchased from MicroHam is properly plugged into the radio and usb 
interface.
73's es good luck
Joe
Frank, IZ7AUH wrote:
> Hi Guys,
> I have some problem to manage by microHAM USB Interface II and DXbase my
> IC-7800
> There are some incompatibility with it?
> Please help me.
>> 73 de IZ7AUH
>>> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>>>