[Dxbase] ** Updated ** Step-by-Step instructions - Joe
wa6axe
Al Bailey
k8six at comcast.net
Mon May 21 22:53:59 EDT 2007
Joe thanks a BUNCH for all the help. It is much appreciated.
At 08:12 PM 5/21/2007, Joseph Glockner wrote:
>To all:
>>I wanted to let you know that I had a DATE correction that
>I needed to make to my original email (step-by-step instructions)..
>I had the start date as July 15th - when it was supposed to be
>May 15th..
>>I am also going to update the GIF photo at my website at:
>>www.navycthistory.com/wa6axe/4O_changes.gif
>>>So here is the latest version of the instructions --
>>----------------------------------------------------------------
>>1. VERY IMPORTANT --- First, Back-up your Logbook mdb file and
>Refdata.mdb file to a safe place.
>>2. Go to DXbase Main Menu - Tools/ Database Access/ Country Prefixes.
>In the Primary prefix TAB of the Prefix Database ADD at the very
>bottom of that table, a Temporary entry of :
>>4O
>Montenegro
>+42.27
>-19.28
>"Deleted" : No checkmark
>"Field Check" : Checkmark
>"Bureau" : Checkmark
>15
>28
>516
>EU
>+0100
>>** NOTE: the DXCC # of 516 will be changed later on back-to it's
>proper # of 514.
>>>3. Close out the Prefix Database window - so that the entry we just
>made can be
>saved completely and that you will be able to see it when you go to step 4.
>>4. Open back up the Prefix Database.
>>** NOTE: In the Alias Map TAB, there are only 2 sets of columns for
>the OLD1 and OLD2
> information. Since we will be adding some new info to
> this Tab, the
> "oldest" info (in OLD2 columns) will simply have to
> "drop-out" of the Table.
>>5. In the Alias Map TAB MODIFY the existing YZ3 and YZ6 Prefix
>entries to read as follows:
>>YZ3 YU 4O 20070515 YU 20060627
>YZ6 YU 4O 20070515 YU 20060627
>>NOTE: we will leave the YZ prefixes under YU (for now) - until the
>ITU issues the YZ prefix(es) to
>another entity. Past owners of the YZ prefixes need to still be shown.
>>6. In the Alias Map TAB, MODIFY the existing 4N3 and 4N6 Prefix
>entries to read as follows:
>>4N3 YU 4O 20070515 YU 20060627
>4N6 YU 4O 20070515 YU 20060627
>>NOTE: we will leave the 4N prefixes under YU (for now) - until the
>ITU issues the 4N prefix(es) to
>another entity. Past owners of the 4N prefixes need to be shown.
>>7. In the Alias Map TAB, MODIFY the existing 4O, 4O3, 4O4, and 4O6
>Prefix entries to read as follows:
>>4O 4O
>4O3 4O YU 20060627
>4O4 4O YU 20070515 T9 19921019
>4O6 4O YU 20060627
>>8. In the Alias Map TAB, MODIFY the existing YT3 and YT6 Prefix
>entries to read as follows:
>>YT3 YU 4O 20070515 YU 20060627
>YT6 YU 4O 20070515 YU 20060627
>>9. In the Alias Map TAB, MODIFY the existing YU3 and YU6 Prefix
>entries to read as follows:
>>YU3 YU 4O 20070515 YU 20060627
>YU6 YU 4O 20070515 YU 20060627
>>>10. Go to the Call Map TAB -- do a search of the Prefix column for any
>YU6 entries that might be in that column.. Change each of them (if
>you have found any) from YU6 to 4O.
>>>11. **** FINALLY **** - go back to the Primary Prefix TAB and go to
>the YU6 entry.
>DELETE that YU6 entry completely. Then go to the 4O entry and change
>the DXCC # of 516 -- to read as 514 ...
>>>Close out the Prefix Database window completely.
>>>Go to the Previous QSO window and FIND the YU6 prefix QSO's you might
>have in your logbook .... when you have found them, simply change the
>Prefix column from YU6 to read 4O ....
>>>You are now done...
>>>>-----------------------------------------
>______________________________________________________________
>Dxbase mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Dxbase at mailman.qth.net
More information about the Dxbase
mailing list