[DXBase] CW Keying

2004年1月31日 14:15:02 -0500 (Eastern Standard Time)

Hi Guys=0D
=0D
 Had serval personal inquires on my setup so here it is for every one =
to
see. =0D
 =0D
 IC-756pro and an old 300mhz computer using 98se. CW circuit is the on=
e
shown in DXBase.=0D
 =0D
 COM 1 =3D Radio Control using home brew controller (IC232, I think).=0D
 COM 2 =3D RigBlaster 8.=0D
 LPT 1 =3D CW=0D
 =0D
DXBase Settings: COM 1, 1200, N, 8, 1, DTR OFF, RTS High.=0D
 =0D
N1MM Settings: COM 1, 1200, N, 8, 1, DTR=3DAlways Off=0D
 Com 2, Digital, DTR=3DAlways Off, RTS=3DPTTT=
x=3D1=0D
 LPT 1, Pin 17=3DCW, Pin 16=3DPTTTx=3D1=0D
 =0D
 Also, in DXBase2004 I had to go into the ini and register files and
change the port settings from 24 to 98. Thanks to Courtney and Jack's hel=
p
on correcting this problem. I had no CW after installing DXBase2004. Had =
to
remove the program and delete every thing in the computer that was relate=
d
to DXBase2004 and 2002. Don't forget to backup your mdb file.=0D
 =0D
JV=0D
=20
--- StripMime Report -- processed MIME parts ---
multipart/alternative
 text/plain (text body -- kept)
 text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed. To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html ---