[DXBase] CPU Use Nears 95 Percent

2003年2月10日 20:14:30 -0500

18K.....Boy, I am going to stop complaining about some hotels phone
lines will only max out to 28K... Anyone ever tried to tunnel in to
work at that rate?
I would suggest that you take a look at your internet connection (modem)
set up.......
I run dialup (49.2k) continuously Friday through Sunday evenings (my
buddy owns the internet company). Dxbase does have the habit of eating
up CPU when it's trying to get to the internet.
Ron ........ NU1U
-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Joe - WL7M
Sent: Sunday, February 09, 2003 22:49
To: [email protected]
Subject: Re: [DXBase] CPU Use Nears 95 Percent
If only I HAD a cable modem....here in the Alaskan bush, we have a dial
up 
modem (dedicated phone line) at about 18K if the wind isn't 
blowing. Sigh................ ;-)
73,
Joe
At 05:18 PM 2/9/2003, you wrote:
>A few of us have experienced something similar.
>In my case, if the Internet Window is open and operating with a 
>Internet node, the cpu use will be very minor, .01 with no other 
>activity-->05 during a quick callsign lookup.
>>But...
>If the internet Cluster node loses connection, cable loss of signal, 
>inadvertent power loss to cable modem, then Windows Task Manager show 
>DXBase as hogging it all, 98%
>>I've never been able to prevent it. A 'KeepAlive' setting makes no 
>difference as the loss of connection is due to loss of the physical 
>internet connection. This situation does not occur if I'm using the VHF

>packet cluster node.
>>I'm using
>WINXP PRO
>AMD 2400 cpu
>512 ram
>multimonitors.
>> > As a new guy, I'm experiencing a problem perhaps others have solved.

> > The CPU use rater goes to about 95 percent when DXBase 2003 has been

> > running for awhile - a few hours. I have an internet connection 
> > running, spotting DX stations. When I close the internet
connection, the CPU rates drops
> > back to about 4 percent. Anyone have an idea as to what is causing
this
> > drain on the resources? Makes it tough to use after awhile.....
> >
> > WinXP
> > Dell Dimension 4100 933 MHz
> > 384 M RAM
> >
> > 73,
> > Joe
> > WL7M

_______________________________________________
DXBase Reflector - Please visit us on the web at www.dxbase.com
- - - - - - - - - - - - - - - - - - - - - - - 
To UNSUBSCRIBE please visit:
http://mailman.qth.net/mailman/listinfo/dxbase