[DXBase] CPU Use Nears 95 Percent

2003年2月09日 18:49:04 -0900

If only I HAD a cable modem....here in the Alaskan bush, we have a dial up 
modem (dedicated phone line) at about 18K if the wind isn't 
blowing. Sigh................ ;-)
73,
Joe
At 05:18 PM 2/9/2003, you wrote:
>A few of us have experienced something similar.
>In my case, if the Internet Window is open and operating with a Internet
>node, the cpu use will be very minor, .01 with no other activity-->05 during
>a quick callsign lookup.
>>But...
>If the internet Cluster node loses connection, cable loss of signal,
>inadvertent power loss to cable modem, then Windows Task Manager show DXBase
>as hogging it all, 98%
>>I've never been able to prevent it. A 'KeepAlive' setting makes no
>difference as the loss of connection is due to loss of the physical internet
>connection.
>This situation does not occur if I'm using the VHF packet cluster node.
>>I'm using
>WINXP PRO
>AMD 2400 cpu
>512 ram
>multimonitors.
>> > As a new guy, I'm experiencing a problem perhaps others have solved. The
> > CPU use rater goes to about 95 percent when DXBase 2003 has been running
> > for awhile - a few hours. I have an internet connection running, spotting
> > DX stations. When I close the internet connection, the CPU rates drops
> > back to about 4 percent. Anyone have an idea as to what is causing this
> > drain on the resources? Makes it tough to use after awhile.....
> >
> > WinXP
> > Dell Dimension 4100 933 MHz
> > 384 M RAM
> >
> > 73,
> > Joe
> > WL7M