[DXBase] DXB2004 sluggish with SH/FDX/50?

2003年4月27日 17:33:45 -0500

Jack
Found the problem! I have two identical machines (which is to say same
processor and motherboard) except that one (my shack machine) uses the on
board video (Intel 815) while the other makes use of the AGP connector and
has an add on video card. The problem I describe occurs on the one with the
on board video. I remember now when I added a video card to this machine
how much faster some applications (which don't appear to be video intensive)
ran.
Ill find a AGP video card and put it in the 'slow' machine to verify that it
speeds up, but I am about 99% sure that that is the problem.
Which is a good lesson...on board video is far from ideal.
Ron, N5IN
----- Original Message ----- 
From: "Jack" <[email protected]>
To: "Ron Stordahl" <[email protected]>;
<[email protected]>
Sent: Sunday, April 27, 2003 3:28 PM
Subject: Re: [DXBase] DXB2004 sluggish with SH/FDX/50?
> Ron,
>> I did it on a 500mhz machine and it processed in about 3 seconds. I did
it
> on a 3.5ghz and it was less than a second. In both cases, sound was
turned
> off. I doubt it can be any faster than that!
>> Jack
>> ----- Original Message ----- 
> From: "Ron Stordahl" <[email protected]>
> To: <[email protected]>
> Sent: Sunday, April 27, 2003 3:31 PM
> Subject: [DXBase] DXB2004 sluggish with SH/FDX/50?
>>> > I just noticed this. Connected via telnet to an AR-Cluster (mine at
> > dxspots.com) when I type SH/DX/50 the list comes thru very quickly, but
> > when I type SH/FDX/50 (i..e. formated as if the spots had arrived
> > normally) DXB2004 is very sluggish. What it is doing is looking at each
> > line and determining which I need and transfering them to the needed
> > spots window. This does take a little additional time, this was noticed
> > in DXB2003, but now it seems to take a 'long' time.
> >
> > Connecting instead using a stand alone telnet client I can verify that
> > SH/FDX/50 is very quick, so its not a problem with AR-Cluster.
> >
> > Assuming you have a reasonable size log, so it has a lot of looking to
> > do, try doing a SH/FDX/50 and see what happens so I will know it's not
> > only at my system.
> >
> > Ron, N5IN
> >
> > _______________________________________________
> > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > - - - - - - - - - - - - - - - - - - - - - - -
> > To UNSUBSCRIBE please visit:
> > http://mailman.qth.net/mailman/listinfo/dxbase
>>