[DXBase] Internet cluster window

2002年6月21日 15:04:40 -0400

CPU usage goes to 100% on my machine, under the conditions described.
Celeron 500
with 512 meg ram
OS is Windows XP Home.
73 de Tony, KD4K
My Weather page = http://home.adelphia.net/~tonycash
My Ham Page = http://home.adelphia.net/~tonycash/kd4k/radio.html
147.150 Repeater Page = http://home.adelphia.net/~tonycash/sawnee/
----- Original Message -----
From: "Ron Stordahl" <[email protected]>
To: <[email protected]>
Sent: Friday, June 21, 2002 9:27 AM
Subject: Re: [DXBase] Internet cluster window
> George
>> The point is not that it "disconnects immediately and completely", but
that
> the Windows Task Manager shows that the CPU usage jumps up to 98% usage
and
> stays there after you disconnect by typing 'bye' from a packet cluster
> session. If you then close the telnet windows the usage drops down to a
few
> percent.
>> As long as the CPU usage is stuck at such a high usage the performance of
> other tasks is greatly hampered.
>> In case you don't know how to test this, do as follows: In WinXP open the
> task manager (alt-ctrl-del) and the window for cpu usage. Observe that it
> is just a few percent busy. Start DXB2003, connect using it to a cluster.
> Observe the cpu usage. Now type 'bye' but leave the cluster window open.
> Observe the cpu usage..it should have popped up to nearly 100% and stays
> there. Close the cluster window and observe that the usage drops down to
a
> low value.
>> If you have done this test and do not observe the near 100% usage (which
> essentially means the application is in a loop) I will be surprised.
>> Ron N5IN
>> ----- Original Message -----
> From: "George K3GP" <[email protected]>
> To: <[email protected]>
> Sent: Thursday, June 20, 2002 10:02 PM
> Subject: [DXBase] Internet cluster window
>>> > Phil:
> >
> > For what it's worth (2 maybe 3 cents?):
> >
> > Here I'm using Win XP/Pro - DXBase2003 on an Athlon XP+ machine with
> > high speed cable modem. Upon closing the Internet connection to N3RA DX
> > cluster it IMMEDIATELY and completely disconnects. No muss, no fuss. I
> > just wanted to add another observation to the collection.
> >
> > Prior to recent DXB upgrade, DXBase2002 also disconnected immediately
> > under XP/Pro and Win98SE with a dial-up ISP.
> >
> > Good luck, it seems you have a bit of a mystery on your hands!
> >
> > 333-3333
> > George K3GP
> >
> >
> >
> > _______________________________________________
> > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > - - - - - - - - - - - - - - - - - - - - - - -
> > To UNSUBSCRIBE please visit:
> > http://mailman.qth.net/mailman/listinfo/dxbase
> >
>> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>