[Antennas] McCoy feeders

2003年2月06日 18:14:50 -0500

Darryl J. Kelly wrote:
>> Simplest way to connect balanced feedline to center of antenna is wrap feedline
> over center insulator back to itself, tape with lots of good tape for strength
> and strain relief, and then a nylon tie-wrap over the tape. Bring the wire out
> both side up to the ends of the antenna wires, which are looped through the
> insulator with several turns. I have been using a 300 ohm twinlead setup like
> this for several years with no problems. I take it down every year or so and
> check or replace the tape over the solder joints. Good 300 ohm twinlead will
> handle 100 watts easily. Good enought for QRP WAS and DXCC.
> Hope this is of interest.
> 73,
> Darryl, KK5IB
>
I like a product called Ladder-Loc available from Radio Works. 
 Gary