[WriteLog] PK-232 Not going out of Transmit and Writelog

Mon May 3 08:23:27 PDT 2010

Just an interesting note on the PK-232 DSP unit not wanting to go out of 
transmit. I called Timewave and Bruce N7TJW had me look under the DSP 
board to see if anything was touching. It looked like a capacitor might 
be touching but it was hard to tell. He told me to wiggle the DSP board 
and lift the side toward the back a little bit.
I hooked it back up and it works fine.
Bruce likely saved me 100ドル.00.
The bottom line here to me is not to be to quick to blame one thing. 
With this simple set up there are still four things involved, Writelog, 
PK-232, K3 and Computer.
If you go with say Windows 7, USB only port, Microham USB Interface 3, 
software for Microham, MMTTY, Writelog, Writelog plug in for MMTTY, 
ESK105 file and TS-870 you are dealing with 9 things.
Ed W0SD
On 4/12/2010 8:59 PM, Richard Phillips wrote:
> Thanks to Joe W4TV, I finally got MMTTY plug-in to work with my version
> of Windows7 32 bit. Disabling User Account Control (UAC) did the job.
> After I disabled it I reloaded the plug-in and MMTTY immediately showed
> up in the TU Type menu. I didn't have to change where Writelog was
> loaded (Program Files\Write Log\Programs) or MMTTY (Programs\MMTTY\).
> All I did was re-install the plug-in. Thanks to all that provided
> information on this problem. Without the list I would be pulling out
> what little hair I have left. See you in the next RTTY contest.
> 73 Rich AA9L
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>>