Acorn A4000

[A3020 ] [Computers ] [Pocketbook ]

Introduction

By 1992 the A3000 was getting a bit long in the tooth and in August Acorn announced the replacement computers:

• The A3010 for home use
• The A3020 for educational use
• The A4000 for a professional 3 box solution

The 3 computers are very similar, being based around the ARM250 which combined the ARM2, MEMC1a, VIDC1a and IOMD chips on a single chip. The new ARM250 ran at 12MHz compared to the A3000 at 8MHz.

The following models were produced [that I know of]:

• AGC10 - A4000 - Home Office
• AGC20 - A4000 - 2MB, 80MB hard drive
• AGC40 - A4000 - 2 MB, 105MB hard drive
• AGC50 - A4000 - 2MB, 210MB hard drive
• AGC80 - A4000 - 2MB, 210MB hard disc, 14" monitor Home Office
• AGC81 - A4000 - 2MB, 210MB hard disc, 14" monitor Learning Curve
• AGC82 - A4000 - 2MB, 80MB hard disc, 14" monitor Early Years

Manuals and documents

Here are the Acorn announcements:

• Acorn Targets new markets with major Products Launch
• Acorn Extends Best-Selling A3000 range
• Acorn launches new A4000

Here is the Acorn product brochure:
APP474 A4000

In October 1992 Personal Computer World published a review titles "A3010, A3020 & A4000 ".

Here is the A4000 Welcome Guide .

Here is the A3010, A3020 and A4000 Module Level Service Manual .

H ere is the A3010, A3020 and A4000 Technical Reference Manual and technical drawings .

A4000

The A4000 was launched in Sept 1992, at the same time as the A3010 and A3020. It was designed as a 3 box "professional" system, although the specifications were almost identical to the A3020. The A4000 used the same mini-podules for expansion and had 1 slot like the A3010 and A3020. The A4000 used virtually the same motherboard and ARM250 CPU.

The most impressive thing I find about the A4000 is how easy it is to dismantle and reassemble. There are 2 screws that hold the cover onto the base, once they are removed, the cover slides off, the motherboard can be lifted out (once the cables are detached) and so can the disc drives. The photos below show how easy it is.

The first A4000 is an AGC40 that used to belong to a school and has the school security marks. It has a Simtec 4MB RAM upgrade installed and ANT Ethernet mini-podule.

Here are some photographs:

[画像:A4000]

A4000 system

A4000 running RISC OS 3.11 with AKF60 monitor

[画像:A4000 front]

A4000 front

The front view of an A4000 with the Acorn logo on the left and the floppy drive on the right. At the top right is the school security mark. Not a very interesting view of a beige, "professional" box!

[画像:A4000 back]

A4000 back

The back of an A4000 with the power supply on the left and the ports along the bottom. From left to right the ports are: keyboard, parallel, RS232, Econet (not fitted), headphone and Video. At the top on the centre right is the ANT Ethernet mini-podule with an RJ45 (10BaseT) socket and a red LED.

[画像:A4000 open]

A4000 open

The A4000 with its top removed. Looking from the front on the left is the speaker, then the Connor CFS105A hard disc and then the floppy disc drive. Above the floppy disc drive is the power supply. The ribbon cables obscure most of the rest of the motherboard, but the ANT Ethernet mini-podule is visible on the top left..

[画像:A4000 motherboard]

A4000 motherboard

The A4000 motherboard showing how efficient the design had become. There are very few compnents, almost all surface mounted. At the bottom right is the RAM and above the 4 chips are 4 little expansion RAM cards. The hard drive connector is in the middle of the right hand edge with the floppy drive connector above. The 2 RISC OS ROMs are in the middle with the ARM250 CPU to the left. Above the ARM250 are the connectors for a Mini-podule and an Econet module. In the top right is the battery for the CMOS RAM.

A4000S

The second A4000 is slightly unusual, SEMERC converted it into a Special Access system by installing Acorn's Special Access pack. The pack consisted of some software that makes a computer easier to use for people with disabilities. The pack contained:

• ASP2 (Archimedes Switch Program) , a keyboard scanner and mouse emulator

• CloseUp, displays a magnifying window on the screen

• FlashBell, a module that converts the error "beep" into a red flashing screen boarder

• Flasher, a utility to make the caret flash

• FormEd, a template editor to create on screen scanning keybaords for ASP2

• Microscop, maginifies a portion of the screen

• MoveWindo, alows you to use any part of a window, not just the title bar, to move a window

• Pointer, alters the size of the pointer dynamically. the faster it moves the bigger it becomes.

• SpecialKB, customises the keyboard and emulates the mouse from the keyboard.

• SwapMouse, swaps the left and right buttons of the mouse.

• Chars, part of the RISC OS 3 ROM, to select characters from the screen

It also has RunCK to run a Concept Keyboard installed. Finally it has a Cumana EMU base unit and Userport micro-podule installed.

Here are some pictures:

[画像:A4000S front]

A4000S front

A4000S note the SEMERC logo on the left.

[画像:A4000S back]

A4000S back

The difference from the A4000 is the Cumana EMU mini-podule in the slot at the top right. The power supply is on the left with the ports alnong the bottom. The ports, from left to right, are: keyboard, parallel, RS232, Econet (not fitted), Video.

[画像:A4000S open]

A4000S open

This is very similar to the A4000, but you can seen the Cumana EMU podule in place and the User port micro podule in place on top of it.

[画像:A4000S motherboard]

A4000S motherboard

Specification: