Masaaki NISHIWAKI (TOYOTA MOTOR CORPORATION)
Research and Development on Brake Noise Reduction Technology for Higher Brake Performance
JSME Medal for Outstanding Paper
Design Method of Porous Scaffold Using Computational Simulation for Bone Regeneration
Taiji ADACHI, Yuji KAWANO, Yuji KAWANO, Yoshihiro TOMITA
Newly Designed Tensile Test System for in vitro Measurement of Mechanical Properties of Cytoskeletal Filaments
Shinji DEGUCHI, Toshiro OHASHI and Masaaki SATO
Formulation of the Coupling Effects among Phase, Temperature and Stress by Using the Phase Field Model.
Takuya UEHARA, Takahiro Tsujino
Development of Evaluation Method for Estimating Stress-Induced Change in Drain Current in Deep-sub-micron MOSFETs
Yukihiro KUMAGAI, Hiroyuki OHTA, Hideo MIURA, AkihiroSHIMIZU, Shiro KAMOHARA, Kenichi MAEKAWA
Development of Newly Designed Ultra-Light Core Structures
Taketoshi NOJIMA, Kazuya SAITO
Response Compensation of Fine-Wire Temperature Sensors
Masato TAGAWA, Kenji KATO, Yasuhiko OHTA
Regime Variation of Spray Combustion on Homogeneous Turbulence
Yuya BABA, Fumiteru AKAMATSU
Molecular Gas Dynamics of Condensation Processes of Methanol Vapor behind a Reflected Shock Wave in a Shock Tube
Takeru YANO, Kazumichi KOBAYASHI, Shigeo FUJIKAWA
Evaluation of Feedback Control System for Wall Turbulence with Micro Sensors and Actuators
Takashi YOSHINO, Yuji SUZUKI, Nobuhide KASAGI
Clarification and Achievement of Theoretical Limitation in Vehicle Dynamics Integrated Management
Thermally Induced Vibration in Active Magnetic Bearing Supported Flexible Rotor
Naohiko TAKAHASHI, Haruo MIURA, Yasuo FUKUSHIMA
Development of a Sensor System for Collecting Tactile Information
Yoshihiro TANAKA, Mami TANAKA, Seiji CHONAN
Real-Time Planning of Humanoid Robot’s Gait for Force Controlled Manipulation
Kensuke HARADA, Shuuji KAJITA, Fumio KANEHIRO, Kiyoshi FUJIWARA, Kenji KANEKO, Kazuhito YOKOI, Hirohisa HIRUKAWA
Development of Position-Orientation Decoupled Spatial In-Parallel Actuated Mechanisms with Six Degrees of Freedom
Yukio TAKEDA, Kouji KAMIYAMA, Yoshihisa MAKI, Masaru HIGUCHI, Koichi SUGIMOTO
Development of A Simulation System for Sheet Transport Path
Hui CHENG, Kazushi YOSHIDA, Shingo NORO, Junichi TAMAMOTO, Mitsuru ASADA
Development of Electric-Discharge Type Metal Jet Nozzle for Printer
Katsumi YAMAGUCHI, Hiroshi NAKAMURA
Development of blood vessel model for investigating effect of hemodynamic conditions on mechanism of atherogenesis
Naoya SAKAMOTO (Tohoku Univ.)
Biomechanics research on role of cytoskeletal structure in cellular mechanosensing mechanism and cytoskeletal remodeling induced by mechanical stimulus
Katsuya SATO (Yamaguchi Univ.)
A Study on an Energy Transmission System for a Totally Implantable Artificial Heart
Kenji SHIBA (Hiroshima Univ.)
A Study on Mechanical Property Measurement and Microstructural Imaging of Auditory Sensory Cells by Atomic Force Microscopy
Michio MURAKOSHI (Tohoku Univ.)
Morphology and Fracture Property of Epoxy Resins and Composites
Wakako ARAKI (Tokyo Institute of Technology)
Investigation of Strength Degradation Mechanism of Fiber Reinforced Plastics under Water Environment
Akira KOBIKI (IHI Co.)
Study of Deformation and Fracture Mechanisms of Non-Crystalline and Nano-crystalline Metals Based on Atomistic Models
Ryosuke MATSUMOTO (Kyoto Univ.)
Investigation of a Traveling-Wave thermoacoustic refrigerator
Yuki UEDA (Tokyo University of Agriculture and Technology)
Study on Mixture Formation, Ignition, and Combustion
Taku TSUJIMURA (National Institute of Advanced Industrial Science and Technology)
Study on flamelet characteristics and soot formation behavior in spray flames
Hiroaki WATANABE (Central Research Institute of Electric Power Industry)
Numerical investigation and modeling of turbulent transport and collision growth of inertial particles
Ryo ONISHI (Japan Agency for Marine-Earth Science and Technology)
Development of miniaturized fiber-optic laser Deppler velocimetry sensor for local flow velocity measurement including blood
Tsutomu TAJIKAWA (KANSAI Univ.)
Study on the Generation of Uniform Diameter Microbubbles in an Ultrasonic Field
Toshinori MAKUTA (Yamagata Univ.)
Clarification and Suppression of Flow Fluctuations around a Steam Control Valve
Ryo MORITA (Central Research Institute of Electric Power Industry)
Investigations and Suppression of Side Load in Rocket Nozzles during Start up and Shutdown Transients
Koichi YONEZAWA (OSAKA Univ.)
Active wave control of a flexible beam using a wave filtering method
Hiroyuki IWAMOTO (Tokyo Metropolitan Univ.)
Study on Mathematical Analysis and Control System to Automatic Pouring System in Casting Industry
Yoshiyuki NODA (Toyohashi University of Technology, faculty of Engineering)
Approach to Essence of Human Force Sensation based on Psychophysical Experiments Using Virtual Reality Technologies and Its Applications
Msayuki HARA (YOKOHAMA NATIONAL Univ.)
Modeling of Multilayered Structures on the Coupling Surface between a structure and an Acoustic Cavity
Takashi YAMAMOTO (Nissan Motor Co.Ltd.)
Environmental Impact Assessment for Machine Tool Operations
Hirohisa NARITA (Nagoya Institute of Technology)
Development of Robot Conveying Medicine Container by Connect
Kazuyoshi Ishikawa (Fuji Heavy Industries Ltd.)
Development of a Numerical Simulation Scheme for Internal Multiphase Flows by a Vortex Method and a Particle Trajectory Tracking Method
Yashiyuki ISO (IHI Co.)
Development of Motorized-Four-Wheel-Drive Control Technology
Shinya Imura (Hitachi, Ltd.)
Development of a Technique for Designing Multilayer Thin Film Structures with a Multiscale Simulation
Yasutaka Okura (Hitachi, Ltd.)
Development of carbody structures for partial and low floor light rail vehicle
Shogo OKOCHI (Kinki sharyo Co.,Ltd.)
Development of crush method for automotive omposite hood
Atsushi KATAOKA (Toray Industries, Inc.)
Enhanced Heat Transfer Module with a Porous plated Boiling Surface
Hitoshi SAKAMOTO (NEC Co.)
Development of the measurement and evaluation technique of lubricating conditions between swashplate and shoe in the swashplate compressor for automotive air conditioning
Hisashi SUZUKI (SANDEN Co.)
The Development of Suppression Controller for Crane System with Superior Operation
Makio SUZUKI (SINTOKOGIO, Ltd.)
Development of water-cooled heat sink using lotus-type porous copper
Hiroshi CHIBA (Mitsubishi Electric Co.)
Development of small specimen testing technique and its application to strength evaluation of spot weld of steel sheets for automotive body
Eisuke NAKAYAMA (Sumitomo Metal Industries, Ltd.)
The development of a water hydraulic axial piston pump
Hideaki NISHIDA (Mitsubishi Heavy Industries, Ltd.)
Development of active vibration control system for high-speed elevators using operational modal analysis
Naoki NOGUCHI (Hitachi, Ltd.)
Development of yarn winder technology for improvement of take-up speed
Kunihiro MISHIMA (Toray Industries, Inc.)
Development of new active steer device for vehicle
Kosuke YAMANAKA (JTEKT Co.)
Analysis Technique Development in a High Precision Reduction Gear Assembly
Kazuhiko YOKOJI (Nabtesuco Co.)
Control of 6 DOF Active Vibration Isolation Devices Using Pneumatic Actuators with Long Piping System
Masaomi WADA (Hitachi, Ltd.)
JSME Education Award (since2001)
1. Instrumentation and control education based on Problem Based Learning(PBL) method about small size biomass energy conversion systems
Shigehiko KANEKO, Tatsuro WATANABE, Yudai YAMASAKI (University of TOKYO)
Literary work of internal combustion engine, heat transfer and combustion
Hidenori TASAKA
Promotion of mechatronics education in Hokkaido by Robot-triathlon
Robot-triathlon steering committee
Graduate Education Program of Design and Integration Capability
Department of Mechanical Engineering Graduate School of Engineering Osaka University
Distinguished Text books of “Creative Robot Design A: For Novice Robotics Engineers”, “Creative Robot Design B: Deepen your ideas for Robotic Engineering”, “Creative Robot Design C: Beginning Robot Control and Embedding Computers”
Kan YONEDA (Chiba Institute of Technology), Takashi TSUBOUCHI (University of Tsukuba), Hisashi OHSUMI (Chuo Univ.)
JSME Excellent Product Award
“Electric Discharge Sampling Equipment”
Kobe Material Testing Laboratry Co.,Ltd.