NXP Semiconductors

imx8mm_evk
- Quick Start
- Get and Build the ARM Trusted firmware
- Get the ddr firmware
- Build U-Boot for sd card
- Boot
- Build U-Boot for qspi flash card
- Boot from QSPI Flash
imx8mn_evk
- Quick Start
- Get and Build the ARM Trusted firmware
- Get the ddr firmware
- Build U-Boot
- Boot
imx8mp_evk
- Quick Start
- Get and Build the ARM Trusted firmware
- Get the ddr firmware
- Build U-Boot
- Boot
imx8mq_evk
- Quick Start
- Get and Build the ARM Trusted firmware
- Get the ddr and hdmi firmware
- Build U-Boot
- Boot
imx8qxp_mek
- Quick Start
- Get and Build the ARM Trusted firmware
- Get scfw_tcm.bin and ahab-container.img
- Build U-Boot
- Flash the binary into the SD card
- Boot
imx8ulp_evk
- Quick Start
- Get and Build the ARM Trusted firmware
- Get the uPower firmware
- Get the M33 firmware
- Get ahab-container.img
- Build U-Boot
- Boot
imx91_11x11_EVK
- Quick Start
- Get and Build the ARM Trusted firmware
- Get the DDR firmware
- Get ahab-container.img
- Build U-Boot
- Boot
imx93_9x9_qsb
- Quick Start
- Get and Build the ARM Trusted firmware
- Get the DDR firmware
- Get ahab-container.img
- Build U-Boot
- Boot
imx93_11x11_evk
- Quick Start
- Get and Build the ARM Trusted firmware
- Get the DDR firmware
- Get ahab-container.img
- Build U-Boot
- Boot
imx93_frdm
- Quick Start
- Get and Build the ARM Trusted firmware
- Get the DDR firmware
- Get ahab-container.img
- Build U-Boot
- Boot from the SD card
- Boot using USB serial download (uuu)
imx943_evk
- Quick Start
- Get ahab-container.img
- Get DDR PHY Firmware Images
- Get and Build OEI Images
- Get and Build System Manager Image
- Get and Build the ARM Trusted Firmware
- Build the Bootloader Image
- Boot
imx95_evk
- Quick Start
- Get ahab-container.img
- Get DDR PHY Firmware Images
- Get and Build OEI Images
- Get and Build System Manager Image
- Get and Build the ARM Trusted Firmware
- Build the Bootloader Image
- Boot
imxrt1020-evk
- How to use U-Boot on NXP i.MXRT1020 EVK
imxrt1050-evk
- How to use U-Boot on NXP i.MXRT1050 EVK
- How to use U-Boot with SPI flash on NXP i.MXRT1050 EVK
imxrt1170-evk
- How to use U-Boot on NXP i.MXRT1170 EVK
LS1046ARDB
- LS1046A SoC Overview
- LS1046ARDB board Overview
- Memory map from core’s view
- QSPI flash map
- Booting Options
- Debug UART
mx6sabreauto
- How to use and build U-Boot on mx6sabreauto
- Booting via Falcon mode
mx6sabresd
- How to use and build U-Boot on mx6sabresd
- 1. Booting from SD card via SPL
- 2. Booting from eMMC
- 3. Booting via Falcon mode
mx6ul_14x14_evk
- How to use U-Boot on Freescale MX6UL 14x14 EVK
- 1. Booting via SDCard
- 2. Booting via Serial Download Protocol (SDP)
mx6ullevk
- How to use U-Boot on Freescale MX6ULL 14x14 EVK
i.MX remoteproc usage guide
- Introduction
- i.MX8MM-EVK
- i.MX8MN-EVK
- i.MX8MQ-EVK
- i.MX8MP-EVK
- i.MX93-FRDM/QSB/EVK
i.MX7D/i.MX8MM SRC_GPR10 PERSIST_SECONDARY_BOOT for bootloader A/B switching
- Introduction
- Operation
- Setup
- References