TUCoPS :: Unix :: General :: cert0132.txt

-----BEGIN PGP SIGNED MESSAGE-----
=============================================================================
CERT(sm) Advisory CA-96.27
Original issue date: December 19, 1996
Last revised: ---
Topic: Vulnerability in HP Software Installation Programs
- -----------------------------------------------------------------------------
 The text of this advisory was originally released on October 11, 1996, as
 AA-96.04.Vulnerability.in.HP.Software.Installation.Programs, developed by
 AUSCERT. Because of the seriousness of the problem, we are reprinting the
 AUSCERT advisory here with their permission. Only the contact information
 at the end has changed: AUSCERT contact information has been replaced with
 CERT/CC contact information.
 We will update this advisory as we receive additional information.
 Look for it in an "Updates" section at the end of the advisory.
===========================================================================
AA-96.04 AUSCERT Advisory
 Vulnerability in HP Software Installation Programs
 11 October 1996
Last Revised:
- ----------------------------------------------------------------------------
AUSCERT has received information that there is a vulnerability in the
Hewlett Packard Software Distributor product, SD-UX, used to install,
update, remove and package HP-UX software and patches. This software is
installed by default under HP-UX 10.x and may have been specifically
installed as additional software under HP-UX 9.x. Any system with the
SD-UX package installed is vulnerable.
This vulnerability may allow local users to gain root privileges.
Exploit details involving this vulnerability have been made publicly
available.
Vendor patches are being developed, but until they are made available,
AUSCERT recommends that sites take the actions suggested in Section 3.
- ----------------------------------------------------------------------------
1. Description
 The HP Software Distributor (SD-UX) is a package that provides a user
 interface which can be used to install, update, remove, and package HP-UX
 software and patches.
 The programs supplied with this package create files in an insecure
 manner. As these programs execute with root privileges, it is possible
 to create or over-write arbitrary files on the system. The default
 location of the programs supplied by the package is /usr/sbin.
 To determine if you have SD-UX installed on your system, check for
 the presence of the swinstall (and related) files using the
 following command:
 % ls -l /usr/sbin/sw*
 Individual sites are encouraged to check their systems for the SD-UX
 package, and if installed, take the actions recommended in Section 3.
2. Impact
 Local users may be able to create or over-write arbitrary files on
 the system. This can be leveraged to gain root privileges.
3. Workarounds/Solution
 AUSCERT recommends that sites prevent possible exploitation of this
 vulnerability by taking the measures stated in Section 3.1 immediately.
 If software maintenance is required, AUSCERT advises that sites
 use one of the workarounds given in 3.2, preferably that described in
 Section 3.2.1.
 Vendor patches may also address this vulnerability in the
 future (Section 3.3).
3.1 Remove permissions
 Until official patches are available sites are encouraged to completely
 prevent the execution of all vulnerable SD-UX programs by any user
 (including root).
 # chmod 400 /usr/sbin/swinstall
 # chmod 400 /usr/sbin/swmodify
 Note that if only the setuid permissions are removed, it is still
 possible for users to gain the privileges of any user executing
 the SD-UX programs (including root).
3.2 Workarounds
 AUSCERT recommends that if software maintenance is required, sites
 implement one of the following workarounds until official vendor
 patches are made available.
 The workaround described in 3.2.1 is the preferred method of doing
 software maintenance. If sites are unable to bring their machines
 into single user mode, the workaround given in Section 3.2.2 may be
 more applicable.
3.2.1 Run in single user mode
 If packages must be installed, the machine should be brought into
 single-user mode, execute permissions re-enabled on
 /usr/sbin/swinstall,
 
 # chmod 700 /usr/sbin/swinstall
 # chmod 700 /usr/sbin/swmodify
 and all symbolic links in /var/tmp and /tmp removed. The following
 command can be used to remove the symbolic links:
 
 # find /tmp /var/tmp -type l -ok rm {} \;
 Once this has been completed, any software package maintenance may be
 safely performed.
 The execute permissions on the vulnerable programs must be removed
 before the machine is brought back into multi-user mode.
 # chmod 400 /usr/sbin/swinstall
 # chmod 400 /usr/sbin/swmodify
3.2.2 Change temporary file environment variable
 This workaround should only be used if the SD-UX programs must be used
 while the machine is in multi-user mode.
 The SD-UX programs use a number of temporary files. The location of
 these files can be configured using the environment variable TMPDIR.
 It is possible to set the environment variable TMPDIR to a non-world
 writable directory. Having the temporary files created in a non-world
 writable directory prevents the exploitation of the vulnerability
 described in this advisory.
 NOTE: The environment variable must be set in each login
 session BEFORE any SD-UX programs are used.
 To use this method, the following steps must be taken:
 1) As root, create a non-world writable temporary directory for the
 temporary files used by the SD-UX programs. The location of these
 temporary files can be configured with the TMPDIR environment variable.
 In this workaround, we have chosen to use the directory
 /var/tmp/SD_tmp.
 
 # mkdir /var/tmp/SD_tmp
 # chmod 700 /var/tmp/SD_tmp
 For this workaround to be effective, sites should ensure that the
 parent directory of $TMPDIR has the sticky bit set if the parent
 directory is world writable. In this workaround, /var/tmp is the
 directory concerned. The sticky bit on /var/tmp can be set with the
 command:
 
 # chmod 1777 /var/tmp
 In all sessions where software maintenance is performed:
 2) Change permissions on the vulnerable programs:
 # chmod 700 /usr/sbin/swinstall
 # chmod 700 /usr/sbin/swmodify
 3) Set the environment variable TMPDIR:
 (under csh)
 # setenv TMPDIR /var/tmp/SD_tmp
 (under sh)
 # TMPDIR=/var/tmp/SD_tmp; export TMPDIR
 and verify that the directory exists and is writable by root.
 # ls -ld $TMPDIR
 4) Perform any software package maintenance.
 5) Remove the execute permissions on the vulnerable programs:
 # chmod 400 /usr/sbin/swinstall
 # chmod 400 /usr/sbin/swmodify
 6) The environment variable TMPDIR is used by many other programs.
 You should either exit this interactive session, or reset the
 TMPDIR environment variables before continuing.
 NOTE: Steps 2) through 6) must be repeated each time software
 maintenance is performed.
3.3 Install vendor patches
 Official vendor patches are currently being developed to address the
 vulnerability described in this advisory. When vendor patches are
 made available, AUSCERT suggests that they be installed.
- ----------------------------------------------------------------------------
AUSCERT thanks Information Technology Services of the University of Southern
Queensland, Viviani Paz (The University of Queensland) and Hewlett Packard
for their assistance in this matter.
- ----------------------------------------------------------------------------
If you believe that your system has been compromised, contact the CERT
Coordination Center or your representative in the Forum of Incident
Response and Security Teams (FIRST).
We strongly urge you to encrypt any sensitive information you send by email.
The CERT Coordination Center can support a shared DES key and PGP. Contact
the CERT staff for more information.
Location of CERT PGP key
 ftp://info.cert.org/pub/CERT_PGP.key
CERT Contact Information
- ------------------------
Email cert@cert.org
Phone +1 412-268-7090 (24-hour hotline)
 CERT personnel answer 8:30-5:00 p.m. EST
 (GMT-5)/EDT(GMT-4), and are on call for
 emergencies during other hours.
Fax +1 412-268-6989
Postal address
 CERT Coordination Center
 Software Engineering Institute
 Carnegie Mellon University
 Pittsburgh PA 15213-3890
 USA
CERT publications, information about FIRST representatives, and other
security-related information are available for anonymous FTP from
 http://www.cert.org/
 ftp://info.cert.org/pub/
CERT advisories and bulletins are also posted on the USENET newsgroup
 comp.security.announce
To be added to our mailing list for CERT advisories and bulletins, send your
email address to
 cert-advisory-request@cert.org
CERT is a service mark of Carnegie Mellon University.
This file:
ftp://info.cert.org/pub/cert_advisories/CA-96.27.hp_sw_install
 http://www.cert.org
 click on "CERT Advisories"
=============================================================================
UPDATES
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Revision history
-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
iQCVAwUBMrlxM3VP+x0t4w7BAQENaAP9FJc1yZVCB/XkEDKNVA7YCT/2jjt0zpUm
2/fyP1x66HJZOS84mLp2cZkxjbdLGost68V8sykhDb3HEfXm8kabddNR5+pGbxNG
TQPDrj1wjeEx1rxjWyUI2aBlqY7avzneExM7RncrUuwlQmot4wMYJy5VFbi1eqw7
fI9a/C7vBXE=
=DJR0
-----END PGP SIGNATURE-----