Review

Citrus by-products as ruminant feeds: A review

This study analyses the quantitative and qualitative characteristics of citrus peel waste and discusses the systems for its valorisation. Citrus peel waste (CPW) is the main residue of the citrus processing industries and is characterised by a seasonal production (which often requires biomass storage) as well as high water content and concentration of essential oils. The disposal of CPW has considerable constraints due to both economic and environmental factors. Currently this residue is mainly used as food for animals, thanks to its nutritional capacity. If enough agricultural land is available close to the processing industries, the use of CPW as organic soil conditioner or as substrate for compost production is also possible, thus improving the organic matter content of the soil. Recently, the possibility of its valorisation for biomethane or bioethanol production has been evaluated by several studies, but currently more research is needed to overcome the toxic effects of the essential oils on the microbial community. Considering the high added value of the compounds that can be recovered from CPW, it has promising potential uses: in the food industry (for production of pectin, dietary fibres, etc.), and in the cosmetic and pharmaceutic industries (extraction of flavonoids, flavouring agents and citric acid). However, in many cases, these uses are still not economically sustainable.

Citrus fruits, including oranges, grapefruits, lemons, limes, tangerines, and mandarins, are among the most widely cultivated fruits around the globe. Its production is increasing every year due to rising consumer demand. Citrus-processing industries generate huge amounts of wastes every year, and citrus peel waste alone accounts for almost 50% of the wet fruit mass. Citrus waste is of immense economic value as it contains an abundance of various flavonoids, carotenoids, dietary fiber, sugars, polyphenols, essential oils, and ascorbic acid, as well as considerable amounts of some trace elements. Citrus waste also contains high levels of sugars suitable for fermentation for bioethanol production. However, compounds such as D-limonene must be removed for efficient bioethanol production. The aim of the present article was to review the latest advances in various popular methods of extraction for obtaining value-added products from citrus waste/byproducts and their potential utility as a source of various functional compounds.

Citation Excerpt :

In this study, extraction of essential oil, polyphenols and pectin from orange peel has been optimized using microwave and ultrasound technology without adding any solvent but only "in situ" water which was recycled and used as solvent. The essential oil extraction performed by Microwave Hydrodiffusion and Gravity (MHG) was optimized and compared to steam distillation extraction (SD). No significant changes in yield were noticed: 4.22 ± 0.03% and 4.16 ± 0.05% for MHG and SD, respectively. After extraction of essential oil, residual water of plant obtained after MHG extraction was used as solvent for polyphenols and pectin extraction from MHG residues. Polyphenols extraction was performed by ultrasound-assisted extraction (UAE) and conventional extraction (CE). Response surface methodology (RSM) using central composite designs (CCD) approach was launched to investigate the influence of process variables on the ultrasound-assisted extraction (UAE). The statistical analysis revealed that the optimized conditions of ultrasound power and temperature were 0.956 W/cm² and 59.83 °C giving a polyphenol yield of 50.02 mg GA/100 g dm. Compared with the conventional extraction (CE), the UAE gave an increase of 30% in TPC yield. Pectin was extracted by conventional and microwave assisted extraction. This technique gives a maximal yield of 24.2% for microwave power of 500 W in only 3 min whereas conventional extraction gives 18.32% in 120 min. Combination of microwave, ultrasound and the recycled "in situ" water of citrus peels allow us to obtain high added values compounds in shorter time and managed to make a closed loop using only natural resources provided by the plant which makes the whole process intensified in term of time and energy saving, cleanliness and reduced waste water.

The production of food waste covers all the food life cycle: from agriculture, up to industrial manufacturing and processing, retail and household consumption. In developed countries, 42% of food waste is produced by households, while 39% losses occur in the food manufacturing industry, 14% in food service sector and remaining 5% in retail and distribution. Increasingly, industrial ecology concepts such as cradle to cradle and circular economy are considered leading principle for eco-innovation, aiming at "zero waste economy" in which waste are used as raw material for new products and applications. The large amount of waste produced by the food industry, in addition to being a great loss of valuable materials, also raises serious management problems, both from the economic and environmental point of view. Many of these residues, however, have the potential to be reused into other production systems, trough e.g. biorefineries. The present work focuses on the use of food waste coming from food manufacturing (FWm). Through extensive literature review, the authors present feasibility and constraints of applying industrial symbiosis in recovering waste from food processing, focusing on recycling (excluding energy recovery) of the solid and liquid waste from food processing industry. The main uses of functional ingredients derived from this transformation are presented and discussed, highlighting mainstream sectors of application, e.g. in the nutraceutical and pharmaceutical industry.