Fa'ata'ita'iga Fa'atatau - Shenzhen HONGSBELT

Fa'asa'o Fa'asaga

I totonu o le fale gaosi aano o manufasi, o le vevela o le ambient e pulea i le 21 ° C, ma faʻaaogaina le HS-100 mo le faʻamauina o aano o manufasi.Ole mamafa ole aano o manufasi e 60kg/M2.O le lautele o le fusi e 600mm, ma le umi atoa o le conveyor e 30M i le mamanu faalava.O le saoasaoa o le faʻaogaina o le fusipaʻu o le 18M / min i le susu ma le malulu siosiomaga.O le conveyor e amata i le la'uina o uta ma leai se tulaga faaputuputu.E fa'aaogaina sprockets ma nifo e 8 i le 192mm le lautele, ma le 38mm x 38mm uamea fa'a'ave'au.Ole fua fa'atatau talafeagai e fa'apea.

Fuafuaina o le tete'e o le iunite - TB

FA'ATAU:

TB =〔 ( WP + 2 WB ) ×ばつ FBW + Wf ×ばつ L + ( WP ×ばつ H )

TB =〔 ( 60 + ( 2 ×ばつ 8.6 ) ×ばつ 0.12 〕 ×ばつ 30 = 278 ( kilokalama / M )

Ona e le o se felauaiga faaputuputu, e mafai ona le amanaiaina Wf.

Fuafuaga o le aofa'i o fa'alavelave - TW

FA'ATAU:

TW = TB ×ばつ FA

TW = 278 ×ばつ 1.0 = 278 ( Kg / M )

Fuafuaga o le fa'ataga fa'ataga - TA

FA'ATAU: TA = BS ×ばつ FS ×ばつ FT

TA = 1445 ×ばつ 1.0 ×ばつ 0.95 = 1372.75 ( Kg / M )

Ona o le tau TA e sili atu nai lo TW, O le mea lea, o le faʻaaogaina ma le HS-100 o le filifiliga saʻo.

Fa'amolemole tagai ile Sprocket spacing ole HS-100 ile Drive Sprockets Chapter;o le maualuga o le va o sprocket e tusa ma le 140mm mo lenei mamanu.E tatau ona tu'u uma le ta'avale/Idler pito o le conveyor i 3 sprockets.

Fuafuaga fa'afe'ese'ese o le fa'a'ave'ave - DS

FA'ATAU: SL = ( TW + SW ) ×ばつ BW

SL = ( 278 + 11.48 ) ×ばつ 0.6 = 173.7 ( Kg )

I le faʻatusatusaina o le Maximum Torque Factor in Shaft Selection unit, matou te iloa o le faʻaogaina o le 38mm ×ばつ 38mm sikuea sikuea e saogalemu ma saʻo filifiliga.

FA'ATAU: DS = 5 ×ばつ 10-4 ×ばつ ( SL x SB3 / E x I )

DS = 5 ×ばつ 10-4 ×ばつ [ (173.7 ×ばつ 7003 ) / ( 19700 ×ばつ 174817 ) ] = 0.0086

Afai e la'ititi le fa'ai'uga o le fa'atusatusaga nai lo le tau masani o lo'o lisiina i le Lisi Fa'asagaga;o le faʻaaogaina o polo polo e lua e lava mo le faiga.

Fuafuaga o le torque u'amea - TS

FA'ATAU:

TS = TW ×ばつ BW ×ばつ R

TS = 10675 (kg - mm)

Pe a faʻatusatusa i le Maximum Torque Factor in Shaft Selection unit, matou te iloa o le faʻaogaina o le 50mm ×ばつ 50mm sikuea sikuea e saogalemu ma saʻo filifiliga.

Fuafuaga o le malosi o solofanua - HP

FA'ATAU:

HP = 2.2 ×ばつ 10-4 ×ばつ [ ( TS ×ばつ V ) / R ]

HP = 2.2 ×ばつ 10-4 ×ばつ [ ( 10675 ×ばつ 10 ) / 66.5 ] = 0.32 ( HP )

I se tulaga lautele, o le malosi faʻainisinia o le liliu o le conveyor e ono leiloa 11% i le taimi o le faʻaogaina.

MHP = [ 0.32 / (100 - 11 ) ×ばつ 100 = 0.35 ( HP )

O le fa'aaogaina o le afi ta'avale 1/2HP o le filifiliga sa'o.

Matou te lisiina faʻataʻitaʻiga aoga i lenei mataupu mo lau faʻamatalaga, ma taʻitaʻia oe e faʻatatau mo suʻega ma faʻamaonia le faʻatusatusaga o taunuuga.

Avea'i Avea'i Tutotonu

O le faʻaputuina o le conveyor e masani ona faʻaaogaina i totonu o le pisinisi meainu.O le mamanu o le conveyor e 2M i le lautele ma 6M i le umi atoa faavaa.O le saoasaoa o le faʻaogaina o le conveyor o loʻo i le 20M / min;e amata i le tulaga o oloa faʻaputuina i luga o le fusi ma faʻagaioia i le 30 °C siʻosiʻomaga mago.O le utaina o le fusi e 80Kg/m2 ma o oloa felauaiga o apa alumini ma meainu i totonu.O la'ei e faia i mea UHMW, ma fa'aaogaina le Fa'asologa 100BIP, fa'alava uamea ma 10 nifo, ma le u'amea u'amea ta'avale/idler shaft i le 50mm x 50mm lapopo'a.O fua fa'atatau talafeagai e fa'apea.

Fa'aputuina felauaiga - Wf

FA'ATAU:

Wf = WP ×ばつ FBP ×ばつ PP

Wf = 80 ×ばつ 0.4 ×ばつ 1 = 32 ( Kilokalama / M )

Fuafuaga o le tete'e o manatu o iunite - TB

FA'ATAU:

TB =〔 ( WP + 2 WB ) ×ばつ FBW + Wf ×ばつ L + ( WP ×ばつ H )

TB =〔 ( 100 + ( 2 ×ばつ 8.6 ) ×ばつ 0.12 + 32 〕 ×ばつ 6 + 0 = 276.4 ( kilokalama / M )

Fuafuaina o le aofa'i o le fa'a- TW

FA'ATAU:

TW = TB ×ばつ FA

TW = 276.4 ×ばつ 1.6 = 442 ( Kg / M )

TWS = 2 TW = 884 Kilokalama / M

TWS mo le ta'avale ogatotonu

Fuafuaga o le fa'ataga fa'ataga - TA

FA'ATAU:

TA = BS ×ばつ FS ×ばつ FT

TA = 1445 ×ばつ 1.0 ×ばつ 0.95 = 1372 ( Kg / M )

Ona o le tau TA e sili atu nai lo TW, O le mea lea, o le faʻaaogaina ma le HS-100 o le filifiliga saʻo.

Fa'amolemole tagai ile Sprocket spacing ole HS-100 ile Drive Sprockets Chapter;o le maualuga o le va o sprocket e tusa ma le 120mm mo lenei mamanu.
Fuafuaga fa'afe'ese'ese o le fa'a'ave'ave - DS

FA'ATAU:

SL = ( TW + SW ) ×ばつ BW

SL = ( 884 + 19.87 ) ×ばつ 2 = 1807 ( Kg )

DS = 5 ×ばつ 10-4 [ ( SL ×ばつ SB3 ) / ( E ×ばつ I ) ]

DS = 5 ×ばつ 10-4 ×ばつ [ ( 1791 ×ばつ 21003 ) / ( 19700 ×ばつ 1352750 ) ] = 0.3 mm

Afai e la'ititi le fa'ai'uga o le fa'atusatusaga nai lo le tau masani o lo'o lisiina i le Lisi Fa'asagaga;o le faʻaaogaina o polo polo e lua e lava mo le faiga.

Fuafuaga o le torque u'amea - TS

FA'ATAU:

TS = TWS ×ばつ BW ×ばつ R

TS = 884 ×ばつかける 2 ×ばつかける 97 =わ 171496 ( kilokalama - mm )

Pe a faʻatusatusa i le Maximum Torque Factor in Shaft Selection unit, matou te iloa o le faʻaogaina o le 50mm ×ばつ 50mm sikuea sikuea e saogalemu ma saʻo filifiliga.

Fuafuaga o le malosi o solofanua - HP

FA'ATAU:

HP = 2.2 ×ばつ 10-4 [ ( TS ×ばつ V ) / R ]

HP =2.2 ×ばつ10-4 ×ばつ [ ( 171496 ×ばつ 4 ) / 82 ] = 1.84 ( HP )

I se tulaga lautele, o le malosi faʻainisinia o le liliu conveyor e ono leiloa 25% i le taimi o le faagaoioia.

MHP = [ 1.84 / ( 100 - 25 ) ] ×ばつ 100 = 2.45 ( HP )

O le faʻaaogaina o le afi taʻavale 3HP o le filifiliga saʻo.

Fa'ata'avale Fa'anofo

O lo'o fa'aalia i luga o le ata o lo'o i luga le fa'ailoga o lo'o fa'aalia mo le fufuluina o fuala'au.O lona maualuga maualuga o le 4M, atoa le umi o le conveyor is10M, ma le lautele fusi e 900mm.O lo'o fa'agaoioi i totonu o se si'osi'omaga susū ma le saoasaoa o le 20M/min e felauai ai pi ile 60Kg/M2.O mea faʻapipiʻi e faia i mea UHMW, ma o le fusipaʻu o le HS-200B faʻatasi ma le 50mm (H) vaʻalele ma le 60mm (H) leoleo itu.E amata le faiga i le tulaga e aunoa ma le aveina o oloa, ma fa'aauau pea ona fa'agaoioi ile 7.5 itula.E fa'aaogaina fo'i fa'atasi ma sprockets ma nifo e 12 ma u'amea u'amea 38mm x 38mm ta'avale/a'ai fa'agae'e.O fua fa'atatau talafeagai e fa'apea.

Fuafuaina o le tete'e o le iunite - TB

FA'ATAU:

TB =〔( WP + 2WB ) ×ばつ FBW + Wf ×ばつ L + ( WP ×ばつ H )

TB =〔( 60 + ( 2 ×ばつ 4.4 ) ×ばつ 0.12 + 0 ) ×ばつ 10 + ( 60 ×ばつ 4 ) = 322.6 ( kilokalama / M )

Ona e le o se felauaiga faaputuputu,Wf e mafai ona le amanaiaina.

Fuafuaga o le aofa'i o fa'alavelave - TW

FA'ATAU:

TW = TB ×ばつ FA

TW = 322.6 ×ばつ 1.6 = 516.2 ( Kg / M )

Fuafuaga o le fa'ataga fa'ataga - TA

FA'ATAU:

TA = BS ×ばつ FS ×ばつ FT

TA = 980 ×ばつ 1.0 ×ばつ 0.95 = 931

Ona o le tau e sili atu le TA nai lo le TW;o le mea lea, o le faʻaaogaina o le fusipaʻu HS-200BFP o se filifiliga saogalemu ma talafeagai.

Fa'amolemole tagai ile Sprocket spacing ole HS-200 ile Drive Sprockets Chapter;o le maualuga o le va o sprocket e tusa ma le 85mm mo lenei mamanu.
Fuafuaga fa'afe'ese'ese o le fa'a'ave'ave - DS

FA'ATAU:

SL = ( TW + SW ) ×ばつ BW

SL = ( 516.2 + 11.48 ) ×ばつ 0.9 = 475 Kg

FA'ATAU:

DS = 5 ×ばつ 10-4 ×ばつ [ ( SL x SB3 ) / ( E x I ) ]

DS = 5 ×ばつ 10-4 ×ばつ [ ( 475 ×ばつ 10003 ) / ( 19700 ×ばつ 174817 ) ] = 0.069 mm

Afai e la'ititi le fa'ai'uga o le fa'atusatusaga nai lo le tau masani o lo'o lisiina i le Lisi Fa'asagaga;o le faʻaaogaina o polo polo e lua e lava mo le faiga.

Fuafuaga o le torque u'amea - TS

FA'ATAU:

TS = TW ×ばつ BW ×ばつ R

TS = 322.6 ×ばつ 0.9 ×ばつ 49 = 14227 ( kilokalama - mm )

I le faʻatusatusaina o le Maximum Torque Factor in Shaft Selection unit, matou te iloa o le faʻaogaina o le 38mm ×ばつ 38mm sikuea sikuea e saogalemu ma saʻo filifiliga.

Fuafuaga o le malosi o solofanua - HP

FA'ATAU:

HP = 2.2 ×ばつ 10-4 ×ばつ [ ( TS ×ばつ V ) / R ]

HP = 2.2 ×ばつ 10-4 ×ばつ [ ( 14227 ×ばつ 20 ) / 49 ] = 1.28 ( HP )

I se tulaga lautele, o le malosi faʻainisinia o le liliu conveyor e ono leiloa 20% i le taimi o le faagaoioia.

MHP = [ 1.28 / ( 100 - 20 ) ] ×ばつ 100 = 1.6 ( HP )

O le faʻaaogaina o le afi taʻavale 2HP o le filifiliga saʻo.

Liliu Conveyor

O se faiga conveyor liliu i luga o le ata o se 90 tikeri liliu conveyor.The wearstrips i le toe foi auala ma le auala e faia uma i mea HDPE.O le lautele o le conveyor belt e 500mm;e faʻaaogaina HS-500B fusipaʻu ma sprockets with24 nifo.O le umi o le vaega tamo'e sa'o e 2M ile pito paie ma le 2M ile pito ta'avale.O lona radius totonu e 1200mm.O le fete'ena'iga o mea fa'aofuofu ma le fusi e 0.15.O le felauaiga mea o pusa katuni i le 60Kg/M2.O le saoasaoa o le faagaoioiga o le conveyor e 4M / min, ma e galue i le siosiomaga matutu.O fa'atatauga fa'atatau e fa'apea.

Fuafuaga o le aofa'i o le iunite - TWS

FA'ATAU:

TWS = ( TN )

Aofa'iga o le vaega o le ta'avale i le auala fa'amomoli.

T0 = 0

T1 = WB + FBW ×ばつ LR ×ばつ WB

T1 = 5.9 + 0.35 ×ばつ 2 ×ばつ ( 5.9 ) = 10.1

FA'ATAU: TN = ( Ca ×ばつ TN-1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ WB

Tete'e o le vaega liliu i le ala toe fo'i.Mo le tau Ca ma le Cb, fa'amolemole tagai ile Laulau Fc.

T2 = ( Ca ×ばつ T2-1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ WB

TN = ( Ca ×ばつ T1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ WB

T2 = ( 1.27 ×ばつ 10.1 ) + ( 0.15 ×ばつ 0.35 ×ばつ 1.7 ) ×ばつ 5.9 = 13.35

FA'ATAU: TN = TN-1 + FBW ×ばつ LR ×ばつ WB

Tenisi o le vaega sa'o i le ala toe fo'i.

T3 = T3-1 + FBW ×ばつ LR ×ばつ WB

T3 = T2 + FBW ×ばつ LR ×ばつ WB

T3 = 13.35 + 0.35 ×ばつ 2 ×ばつ 5.9 = 17.5

FA'ATAU: TN = TN-1 + FBW ×ばつ LP ×ばつ ( WB + WP )

T4 = T4-1 + FBW ×ばつ LP ×ばつ ( WB + WP )

T4 = T3 + FBW ×ばつ LP ×ばつ ( WB + WP )

T4 = 17.5 + 0.35 ×ばつ 2 ×ばつ ( 5.9 + 60 ) = 63.6

Tete'e o le vaega sa'o i le ala amo.

FA'ATAU: TN = ( Ca ×ばつ TN-1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ ( WB + WP )

Tete'e o le vaega liliu i le ala toe fo'i.Mo le tau Ca ma le Cb, fa'amolemole tagai ile Laulau Fc.

T5 = ( Ca ×ばつ T5-1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ ( WB + WP )

T5 = ( Ca ×ばつ T6 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ ( WB + WP )

T5 = ( 1.27 ×ばつ 63.6 ) + ( 0.15 ×ばつ 0.35 ×ばつ 1.7 ) ×ばつ ( 5.9 + 60 ) = 86.7

Aofa'iga o fusi TWS (T6)

FA'ATAU:

TWS = T6 = TN-1 + FBW ×ばつ LP ×ばつ ( WB + WP )

Aofa'iga o le vaega sa'o i le auala o le amoina.

T6 = T6-1 + FBW ×ばつ LP ×ばつ ( WB + WP )

T6 = T5 + FBW ×ばつ LP ×ばつ ( WB + WP )

T6 = 86.7 + 0.35 ×ばつ 2 ×ばつ ( 5.9 + 60 ) = 132.8 ( Kg / M )

Fuafuaga o le fa'ataga fa'ataga - TA

FA'ATAU:

TA = BS ×ばつ FS ×ばつ FT

TA = 2118 ×ばつ 1.0 ×ばつ 0.95 = 2012 ( Kg / M )

Ona o le tau e sili atu le TA nai lo le TW;o le mea lea, o le faʻaaogaina o le 500B conveyor belt o se filifiliga saogalemu ma talafeagai.

Fa'amolemole tagai ile Sprocket spacing ole HS-500 ile Drive Sprockets Chapter;o le pito maualuga o le va o sprocket e tusa ma le 145mm.
Fuafuaga fa'afe'ese'ese o le fa'a'ave'ave - DS

FA'ATAU:

SL = ( TWS + SW ) ×ばつBW

SL = ( 132.8 + 11.48 ) ×ばつ 0.5 = 72.14 ( Kg )

FA'ATAU:

DS = 5 ×ばつ 10-4 ×ばつ [ ( SL ×ばつ SB3 ) / ( E ×ばつ I ) ]

DS = 5 ×ばつ 10-4 ×ばつ [ ( 72.14 ×ばつ 6003 ) / ( 19700 ×ばつ 174817 ) ] = 0.002 ( mm )

Afai e la'ititi le fa'ai'uga o le fa'atusatusaga nai lo le tau masani o lo'o lisiina i le Lisi Fa'asagaga;o le faʻaaogaina o polo polo e lua e lava mo le faiga.

Fuafuaga o le torque u'amea - TS

FA'ATAU:

TS = TWS ×ばつ BW ×ばつ R

TS = 132.8 ×ばつ 0.5 ×ばつ 92.5 = 6142 (kg - mm)

Pe a faʻatusatusa i le Maximum Torque Factor in Shaft Selection unit, matou te iloa o le faʻaogaina o le 50mm ×ばつ 50mm sikuea sikuea e saogalemu ma saʻo filifiliga.

Fuafuaga o le malosi o solofanua - HP

FA'ATAU:

HP = 2.2 ×ばつ 10-4 ×ばつ [ ( TS ×ばつ V / R ) ]

HP = 2.2 ×ばつ 10-4 ×ばつ [ ( 6142 ×ばつ 4 ) / 95 ] = 0.057 ( HP )

I se tulaga lautele, o le malosi faʻainisinia o le liliu conveyor e ono leiloa 30% i le taimi o le faagaoioia.

MHP = [ 0.057 / ( 100 - 30 ) ] ×ばつ 100 = 0.08 ( HP )

O le fa'aaogaina o le afi ta'avale 1/4HP o le filifiliga sa'o.

Fa'aliliuga Liliu Fa'asologa

Serial-Turning-Conveyor

O lo'o fausia le fa'asologa o fa'aliliuga fa'asolosolo e lua 90 tikeri conveyors fa'atasi ai ma le fa'afeagai.O mea fa'apipi'i i le auala toe fo'i ma le auala e fa'aaogaina e fai uma i meafaitino HDPE.O le lautele o le conveyor belt e 300mm;e faʻaaogaina HS-300B fusipaʻu ma sprockets with12 nifo.O le umi o le vaega tamo'e sa'o o le 2M i le pito paie, 600mm i le vaega soofaatasi, ma le 2M i le pito o le taavale.O lona radius totonu e 750mm.O le fete'ena'iga o mea fa'aofuofu ma le fusi e 0.15.O mea felauaiga o pusa palasitika ile 40Kg/M2.O le saoasaoa o le faagaoioiga o le conveyor o le 5M / min, ma e galue i le siosiomaga matutu.O fa'atatauga fa'atatau e fa'apea.

Fuafuaga o le aofa'i o le iunite - TWS

FA'ATAU:

TWS = ( TN )

T0 = 0

Aofa'iga o le vaega o le ta'avale i le auala fa'amomoli.

T1 = WB + FBW ×ばつ LR ×ばつ WB

T1 = 5.9 + 0.35 ×ばつ 2 ×ばつ 5.9 = 10.1

FA'ATAU:

TN = ( Ca ×ばつ TN-1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ WB

Tete'e o le vaega liliu i le ala toe fo'i.Mo le tau Ca ma le Cb, fa'amolemole tagai ile Laulau Fc.

T2 = ( Ca ×ばつ T2-1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ WB

T2 = ( Ca ×ばつ T1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ WB

T2 = ( 1.27 ×ばつ 10.1 ) + ( 0.15 ×ばつ 0.35 ×ばつ 1.05 ) ×ばつ 5.9 = 13.15

FA'ATAU:

TN = TN-1 + FBW ×ばつ LR ×ばつ WB

Tenisi o le vaega sa'o i le ala toe fo'i.

T3 = T3-1 + FBW ×ばつ LR ×ばつ WB

T3 = T2 + FBW ×ばつ LR ×ばつ WB

T3 = 13.15 + ( 0.35 ×ばつ 0.6 ×ばつ 5.9 ) = 14.3

FA'ATAU:

TN = ( Ca ×ばつ TN-1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ WB

Tete'e o le vaega liliu i le ala toe fo'i.Mo le tau Ca ma le Cb, fa'amolemole tagai ile Laulau Fc.

T4 = ( Ca ×ばつ T4-1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ WB

TN = ( Ca ×ばつ T3 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ WB

T4 = ( 1.27 ×ばつ 14.3 ) + ( 0.15 ×ばつ 0.35 ×ばつ 1.05 ) ×ばつ 5.9 = 18.49

FA'ATAU:

TN = TN-1 + FBW ×ばつ LR ×ばつ WB

Tenisi o le vaega sa'o i le ala toe fo'i.

T5 = T5-1 + FBW ×ばつ LR ×ばつ WB

T5 = T4 + FBW ×ばつ LR ×ばつ WB

T5 = 18.49 + ( 0.35 ×ばつ 2 ×ばつ 5.9 ) = 22.6

FA'ATAU:

TN = TN-1 + FBW ×ばつ LP ×ばつ ( WB + WP )

Tete'e o le vaega sa'o i le ala amo.

T6 = T6-1 + FBW ×ばつ LP ×ばつ ( WB + WP )

T6 = T5 + FBW ×ばつ LP ×ばつ ( WB + WP )

T6 = 22.6 + [ ( 0.35 ×ばつ 2 ×ばつ ( 5.9 + 40 )] = 54.7

FA'ATAU:

TN = ( Ca ×ばつ TN-1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ ( WB + WP )

Tete'e o le vaega liliu i le ala amo.Mo le tau Ca ma le Cb, fa'amolemole tagai ile Laulau Fc

T7 = ( Ca ×ばつ T7-1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ ( WB + WP )

T7 = ( Ca ×ばつ T6 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ ( WB + WP )

T7 = ( 1.27 ×ばつ 54.7 ) + ( 0.15 ×ばつ 0.35 ×ばつ 1.05 ) ×ばつ ( 40 + 5.9 ) = 72

FA'ATAU:

TN = TN-1 + FBW ×ばつ LP ×ばつ ( WB + WP )

Tete'e o le vaega sa'o i le ala amo.

T8 = T8-1 + FBW ×ばつ LP ×ばつ ( WB + WP )

TN = T7 + FBW ×ばつ LP ×ばつ ( WB + WP )

T8 = 72 + [ ( 0.35 ×ばつ 0.5 ×ばつ ( 40 + 5.9 ) ] = 80

FA'ATAU:

TN = ( Ca ×ばつ TN-1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ ( WB + WP )

Tete'e o le vaega liliu i le ala amo.Mo le tau Ca ma le Cb, fa'amolemole tagai ile Laulau Fc

T9 = ( Ca ×ばつ T9-1 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ ( WB + WP )

T9 = ( Ca ×ばつ T8 ) + ( Cb ×ばつ FBW ×ばつ RO ) ×ばつ ( WB + WP )

T9 = ( 1.27 ×ばつ 80 ) + ( 0.15 ×ばつ 0.35 ×ばつ 1.05 ) ×ばつ ( 40 + 5.9 ) =104

Aofa'iga o fusi TWS (T6)

FA'ATAU:

TWS = T10

Aofa'iga o le vaega sa'o i le auala o le amoina.

TN = TN-1 + FBW ×ばつ LP ×ばつ ( WB + WP )

T10 = T10-1 + FBW ×ばつ LP ×ばつ ( WB + WP )

T10 = 104 + 0.35 ×ばつ 2 ×ばつ ( 5.9 + 40 ) = 136.13 ( Kg / M )

Fuafuaga o le fa'ataga fa'ataga - TA

FA'ATAU:

TA = BS ×ばつ FS ×ばつ FT

TA = 2118 ×ばつ 1.0 ×ばつ 0.95 = 2012 ( Kg / M )

Ona o le tau e sili atu le TA nai lo le TW;o le mea lea, o le faʻaaogaina o le belt conveyor Series 300B o se filifiliga saogalemu ma talafeagai.

Fa'amolemole tagai ile Sprocket spacing ile Drive Sprockets Chapter;o le maualuga o le va o sprocket e tusa ma le 145mm.
Fuafuaga fa'afe'ese'ese o le fa'a'ave'ave - DS

FA'ATAU:

SL = ( TWS + SW ) ×ばつ BW

SL = ( 136.13 + 11.48 ) ×ばつ 0.3 = 44.28 ( Kg )

FA'ATAU:

DS = 5 ×ばつ 10-4 ×ばつ [ ( SL ×ばつ SB3 ) / ( E x I ) ]

DS = 5 ×ばつ 10-4 ×ばつ[ ( 44.28 ×ばつ 4003 ) / ( 19700 ×ばつ 174817 ) = 0.000001 ( mm )

Afai e la'ititi le fa'ai'uga o le fa'atusatusaga nai lo le tau masani o lo'o lisiina i le Lisi Fa'asagaga;o le faʻaaogaina o polo polo e lua e lava mo le faiga.

Fuafuaga o le torque u'amea - Ts

FA'ATAU:

TS = TWS ×ばつ BW ×ばつ R

TS = 136.3 ×ばつ 0.3 ×ばつ 92.5 = 3782.3 (kg - mm)

I le faʻatusatusaina o le Maximum Torque Factor in Shaft Selection unit, matou te iloa o le faʻaogaina o le 38mm ×ばつ 38mm sikuea sikuea e saogalemu ma saʻo filifiliga.

Calc, ulat, io, n o le malosi o solofanua - HP

FA'ATAU:

HP = 2.2 ×ばつ 10-4 ×ばつ [ ( TS ×ばつ V ) / R ]

HP = 2.2 ×ばつ 10-4 ×ばつ [ ( 3782.3 ×ばつ 5 ) / 92.5 ] = 0.045 ( HP )

I se tulaga lautele, o le malosi faʻainisinia o le avefeʻau taʻavale tutotonu e ono leiloa pe a ma le 30% i le taimi o le taotoga.

MHP = [ 0.045 / ( 100 - 30 ) ] ×ばつ 100 = 0.06 ( HP )

O le fa'aaogaina o le afi ta'avale 1/4HP o le filifiliga sa'o.

Fa'ata'avale Fa'ata'amilo

O ata o loʻo faʻaalia i luga o se faʻataʻitaʻiga o le spiral conveyor system ma tolu laulau.O fa'alavalava o le ala amo ma le auala e toe fo'i mai ai e faia i meafaitino HDPE.Ole lautele ole fusipa'u e 500mm ma fa'aaoga le HS-300B-HD ma fa'a'au fa'atasi ma nifo e 8.O le umi o le vaega e ave sa'o i totonu o le ta'avale ma le fa'au'uga fa'aletonu e 1 mita ta'itasi.O lona laina feliuliua'i totonu o le 1.5M, ma le felauaiga o mea o pusa meli ile 50Kg/M2.Ole saoasaoa ole gaioiga ole conveyor ole 25M/min, fa'asaga ile maualuga ole 4M ma fa'agaoioi ile siosiomaga matutu.O fa'atatauga fa'atatau e fa'apea.

Fuafuaga o le aofa'i o le iunite - TWS

FA'ATAU:

TW = TB ×ばつ FA

TWS = 958.7 ×ばつ 1.6 = 1533.9 ( Kg / M )

FA'ATAU:

TB = [ 2 ×ばつ R0 ×ばつ M + ( L1 + L2 ) ] ( WP + 2 WB ) ×ばつ FBW + ( WP ×ばつ H )

TB = [ 2 ×ばつ 3.1416 ×ばつ 2 ×ばつ 3 + ( 1 + 1 ) ] ( 50 + 2 ×ばつ 5.9 ) ×ばつ 0.35 + ( 50 ×ばつ 2 )

TB = 958.7 ( Kg / M )

Fuafuaga o le fa'ataga fa'ataga - TA

FA'ATAU:

TA = BS ×ばつ FS ×ばつ FT

TA = 2118 ×ばつ 1.0 ×ばつ 0.95 = 2012 ( Kg / M )

Ona o le tau e sili atu le TA nai lo le TW;o le mea lea, faʻaaoga Faʻasologa 300B-HD fusipaʻu o se filifiliga saogalemu ma talafeagai.

Fa'amolemole tagai ile Sprocket spacing ole HS-300 ile Drive Sprockets Chapter;o le maualuga o le va o sprocket e tusa ma le 145mm.
Fuafuaga fa'afe'ese'ese o le fa'a'ave'ave - DS

FA'ATAU:

SL = ( TWS + SW ) ×ばつ BW

SL = ( 1533.9 + 11.48 ) ×ばつ 0.5 = 772.7 ( Kg )

FA'ATAU:

DS = 5 ×ばつ 10-4 ×ばつ[ ( SL ×ばつ SB3 ) / ( E ×ばつ I ) ]

DS = 5 ×ばつ 10-4 ×ばつ[ ( 772.7 ×ばつ 6003 ) / ( 19700 ×ばつ174817 ) ] = 0.024 ( mm )

Afai e la'ititi le fa'ai'uga o le fa'atusatusaga nai lo le tau masani o lo'o lisiina i le Lisi Fa'asagaga;o le faʻaaogaina o polo polo e lua e lava mo le faiga.
Fuafuaga o le torque u'amea - TS

FA'ATAU:

TS = TWS ×ばつ BW ×ばつ R

TS = 1533.9 ×ばつ 0.5 ×ばつ 92.5 = 70942.8 (kg - mm)

I le faʻatusatusaina o le Maximum Torque Factor in Shaft Selection unit, matou te iloa o le faʻaogaina o le 38mm ×ばつ 38mm sikuea sikuea e saogalemu ma saʻo filifiliga.

Fuafuaga o le malosi o solofanua - HP

FA'ATAU:

HP = 2.2 ×ばつ 10-4 ×ばつ [ ( TS ×ばつ V ) / R ]

HP = 2.2 ×ばつ 10-4 ×ばつ [ ( 70942.8 ×ばつ 4 ) / 60 = 1.04 ( HP )

I se tulaga lautele, o le malosi faʻainisinia o le avefeʻau taʻavale tutotonu e ono leiloa pe a ma le 40% i le taimi o le taotoga.

MHP = [ 1.04 / ( 100 - 40 ) ] ×ばつ 100 = 1.73 ( HP )

O le faʻaaogaina o le afi taʻavale 2HP o le filifiliga saʻo.