Damn Small Linux Forums
›
Damn Small Linux Forum
›
User Feedback
v
Asus Eee PC 1001PX starts X only in safe video mode; Ventoy works
Asus Eee PC 1001PX starts X only in safe video mode; Ventoy works
Asus Eee PC 1001PX starts X only in safe video mode; Ventoy works
02-02-2024, 10:59 PM
Hi! It has been a long time, DSL. :-)
I have just tried the current alpha (MD5 c9941fab32e9a6d1962a8119b85a8e85) on my old netbook, an Asus Eee PC 1001PX. It's a model from 2010. It has an x86-64 CPU, 1 GiB of RAM, Intel GMA 3150, and a ×ばつ600 screen. I have recently installed Debian 12 on it (64-bit), where everything seems to work.
The test went like this. I booted off the USB drive and chose to boot the DSL ISO in Ventoy's normal mode. In DSL's boot menu I also chose the default option. When the system got to graphics, it became stuck in a loop restarting Xorg. Xorg started, stopped with a fatal server error (see the attached log), then started again. I rebooted DSL in safe video mode, and Xorg worked.
Here is a screenshot. ×ばつ600 was the only resolution available in ARandR.
[Image: dsl-2024.alpha-800x600.1706911590.png]
I connected to Wi-Fi without issue and was able to use a USB keyboard and the built-in SD card reader. It seemed like everything but video worked normally. A pretty good start.
I have attached my Xorg.0.log from when DSL got stuck in an Xorg restart loop. (I like that this forum runs MyBB instead of phpBB or SMF.)
I have just tried the current alpha (MD5 c9941fab32e9a6d1962a8119b85a8e85) on my old netbook, an Asus Eee PC 1001PX. It's a model from 2010. It has an x86-64 CPU, 1 GiB of RAM, Intel GMA 3150, and a ×ばつ600 screen. I have recently installed Debian 12 on it (64-bit), where everything seems to work.
The test went like this. I booted off the USB drive and chose to boot the DSL ISO in Ventoy's normal mode. In DSL's boot menu I also chose the default option. When the system got to graphics, it became stuck in a loop restarting Xorg. Xorg started, stopped with a fatal server error (see the attached log), then started again. I rebooted DSL in safe video mode, and Xorg worked.
Here is a screenshot. ×ばつ600 was the only resolution available in ARandR.
[Image: dsl-2024.alpha-800x600.1706911590.png]
![[Image: dsl-2024.alpha-800x600.1706911590.png]](https://paste.dbohdan.com/dsl-2024.alpha-800x600.1706911590.png){kind=link}
I connected to Wi-Fi without issue and was able to use a USB keyboard and the built-in SD card reader. It seemed like everything but video worked normally. A pretty good start.
I have attached my Xorg.0.log from when DSL got stuck in an Xorg restart loop. (I like that this forum runs MyBB instead of phpBB or SMF.)
02-02-2024, 11:17 PM
Yes, it has been a long time! Thank you for posting with all the details and including the log.
02-03-2024, 05:37 PM
Quote:[ 175.234] (WW) glamor requires at least 128 instructions (64 reported)I think this is the source of the problem. Glamor is a generic accelerated X11 driver, but the GPU in the EeePC does not fulfill the requirements to run it. The legacy Xorg intel video driver, xserver-xorg-video-intel, might work. Alternatively, you can try to use the fbdev driver, by passing xorg=fbdev instead of xorg=safe – like vesa it's not accelerated, but it gave the proper resolution at least on my machine.
[ 175.235] (EE) modeset(0): Failed to initialize glamor at ScreenInit() time.
02-03-2024, 06:19 PM
Thanks! Passing
to the kernel gave me the right resolution.
[Image: dsl-2024.alpha-1024x600.1706983335.png]
Code:
xorg=fbdev[Image: dsl-2024.alpha-1024x600.1706983335.png]
![[Image: dsl-2024.alpha-1024x600.1706983335.png]](https://paste.dbohdan.com/dsl-2024.alpha-1024x600.1706983335.png){kind=link}
02-03-2024, 10:15 PM
Similar Install issues with Hp mini PC (https://www.manua.ls/hp/mini-110/specifications)
2GB M and 250 SDD
The system repeatedly try to restart and the same or similar log as above.
installing with the safe video works but there is a malform screen for about 30 seconds with part of the Xorg log displayed
it then goes blank boots correctly.
2GB M and 250 SDD
The system repeatedly try to restart and the same or similar log as above.
installing with the safe video works but there is a malform screen for about 30 seconds with part of the Xorg log displayed
it then goes blank boots correctly.
02-13-2024, 07:29 PM
(02-03-2024, 06:19 PM)dbohdan Wrote: Thanks! Passing
to the kernel gave me the right resolution.Code:xorg=fbdev
[Image: dsl-2024.alpha-1024x600.1706983335.png]
Where i have to set this option? grub.conf?
02-16-2024, 07:04 AM
(02-13-2024, 07:29 PM)mrnicetux Wrote: Where i have to set this option? grub.conf?
I'm new here so I'm not sure but you can probably set this in your xorg.conf device section for your GPU.
02-21-2024, 03:55 PM
I can confirm I experience this too on default settings on an eeepc 701.
Starting in safe mode works - as does setting xorg=fbdev but only on the livecd splash screen. When I tried to set xorg=fbdev within xorg.conf I got into the same xorg crash / reboot cycle. I ended up reinstalling the OS entirely. On reinstall - I set xorg=fbdev when opening the livecd, that setting seemed to have persisted as I am getting the full 800x480 resolution
Starting in safe mode works - as does setting xorg=fbdev but only on the livecd splash screen. When I tried to set xorg=fbdev within xorg.conf I got into the same xorg crash / reboot cycle. I ended up reinstalling the OS entirely. On reinstall - I set xorg=fbdev when opening the livecd, that setting seemed to have persisted as I am getting the full 800x480 resolution
03-30-2024, 02:44 PM
John, could you add xserver-xorg-video-intel to the ISO? It gives me native 1024x600 resolution on the 1001PX in Debian 12 and DSL 2024 RC2. There is at least one other user with a 1001PX on this forum and more with Intel hardware supported by the driver.
« Next Oldest | Next Newest »
Users browsing this thread: 2 Guest(s)