Re: [REGRESSION 6.16] xHCI host not responding to stop endpoint command after suspend and resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


(追記) (追記ここまで)



On 19.8.2025 9.41, Michał Pecio wrote:
On 2025年8月18日 23:11:03 +0200, Michał Pecio wrote:
A bisect effort is ongoing and c0c9379f235d ("Merge tag 'usb-6.16-rc1'
of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb") is bad,
so that's where the bug likely came from.
Looks like the result is in.
e1db856bd28891d70008880d7f1d3b8d1ea948fd is the first bad commit
commit e1db856bd28891d70008880d7f1d3b8d1ea948fd
Author: Niklas Neronin <niklas.neronin@xxxxxxxxxxxxxxx>
Date: Thu May 15 16:56:14 2025 +0300
 usb: xhci: remove '0' write to write-1-to-clear register
Thanks for tracking this down, I see the issue now
We may lose interrupts due to this patch, example:
Hardware sets IMAN_IP BIT(0) when in needs attention
Driver later allows xHC interrupt by setting IMAN_IE BIT(1), but
Driver clears IMAN_IP (RW1C) when setting IMAN_IE so no interrupt is triggered.
interrupts are only triggered if both IMAN_IE and IMAN_IP are set, (and some other
moderation and event handling bits are correct)
we need to make sure we don't accidentally clear a pending interrupt (IMAN_IP)
in both the enable and disable case.
Thanks
Mathias

[Index of Archives] [Linux Media] [Linux Input] [Linux Audio Users] [Yosemite News] [Linux Kernel] [Linux SCSI] [Old Linux USB Devel Archive]

(追記) (追記ここまで)
Powered by Linux

AltStyle によって変換されたページ (->オリジナル) /