Loongson 2K0300 ships a GPIO controller whose input/output control logic is similar to previous generation of SoCs. Additionally, it acts as an interrupt-controller supporting both level and edge interrupts and has a distinct reset signal. Describe its compatible in devicetree. We enlarge the maximum value of ngpios to 128, since the controller technically supports at most 128 pins, although only 106 are routed out of the package. Properties for interrupt-controllers and resets are introduced and limited as 2K0300 only. Signed-off-by: Yao Zi <ziyao@xxxxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- .../bindings/gpio/loongson,ls-gpio.yaml | 28 ++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml index b68159600e2b..69852444df23 100644 --- a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml @@ -14,6 +14,7 @@ properties: oneOf: - enum: - loongson,ls2k-gpio + - loongson,ls2k0300-gpio - loongson,ls2k0500-gpio0 - loongson,ls2k0500-gpio1 - loongson,ls2k2000-gpio0 @@ -36,7 +37,7 @@ properties: ngpios: minimum: 1 - maximum: 64 + maximum: 128 "#gpio-cells": const: 2 @@ -49,6 +50,14 @@ properties: minItems: 1 maxItems: 64 + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + resets: + maxItems: 1 + required: - compatible - reg @@ -58,6 +67,23 @@ required: - gpio-ranges - interrupts +allOf: + - if: + properties: + compatible: + contains: + const: loongson,ls2k0300-gpio + then: + required: + - "#interrupt-cells" + - interrupt-controller + - resets + else: + properties: + "#interrupts-cells": false + interrupt-controller: false + resets: false + additionalProperties: false examples: -- 2.50.1