On 2025年8月28日 15:17:09 +0200, Andrea della Porta wrote: > Hi, > > The following patches add a few peripheral DT nodes and related pin/gpio > nodes for Raspberry Pi 5. > > - Patch 1: Amend the bindings to avoid DT compiler warnings. > > - Patch 2: Adds core pinctrl nodes and defines SD pins as a first appliance > for the pinctrl. > > - Patch 3: Wires the gpio-key for power button and related gpio controller. > > - Patch 4: Adds DT node for WiFi. > > - Patch 5: Adds Bluetooth DT node. > > All comments and suggestions are welcome! > > Happy hacking! > Ivan and Andrea > > > CHANGES in V2: > > --- DTS --- > > - bcm2712.dtsi: added a proper clocks node to the uarta serial > in order to replace the legacy clock-frequency property. As > a result, the following patch from the previous patchset > has been dropped since it's now useless: > > "dt-bindings: serial: Add clock-frequency property as an alternative to clocks" > > > Andrea della Porta (1): > dt-bindings: mmc: Add support for capabilities to Broadcom SDHCI > controller > > Ivan T. Ivanov (4): > arm64: dts: broadcom: bcm2712: Add pin controller nodes > arm64: dts: broadcom: bcm2712: Add one more GPIO node > arm64: dts: broadcom: bcm2712: Add second SDHCI controller node > arm64: dts: broadcom: bcm2712: Add UARTA controller node > > .../bindings/mmc/brcm,sdhci-brcmstb.yaml | 2 +- > .../dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts | 133 ++++++++++++++++++ > arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 55 ++++++++ > 3 files changed, 189 insertions(+), 1 deletion(-) > > -- > 2.35.3 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade This patch series was applied (using b4) to base: Base: attempting to guess base-commit... Base: tags/next-20250828 (exact match) If this is not the correct base, please add 'base-commit' tag (or use b4 which does this automatically) New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/broadcom/' for cover.1756386531.git.andrea.porta@xxxxxxxx: arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: /soc@107c000000/pinctrl@7d504100: failed to match any schema with compatible: ['brcm,bcm2712c0-pinctrl'] arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: /soc@107c000000/pinctrl@7d504100: failed to match any schema with compatible: ['brcm,bcm2712c0-pinctrl'] arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: /soc@107c000000/pinctrl@7d510700: failed to match any schema with compatible: ['brcm,bcm2712c0-aon-pinctrl'] arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: /soc@107c000000/pinctrl@7d510700: failed to match any schema with compatible: ['brcm,bcm2712c0-aon-pinctrl'] arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dtb: hvs@107c580000 (brcm,bcm2712-hvs): clocks: [[28, 4], [28, 16]] is too long from schema $id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml# arch/arm64/boot/dts/broadcom/bcm2712-d-rpi-5-b.dtb: hvs@107c580000 (brcm,bcm2712-hvs): clocks: [[28, 4], [28, 16]] is too long from schema $id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml# arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc@107c000000/pinctrl@7d504100: failed to match any schema with compatible: ['brcm,bcm2712c0-pinctrl'] arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: /soc@107c000000/pinctrl@7d510700: failed to match any schema with compatible: ['brcm,bcm2712c0-aon-pinctrl'] arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dtb: hvs@107c580000 (brcm,bcm2712-hvs): clocks: [[28, 4], [28, 16]] is too long from schema $id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml#