Use the schematic for our board to select the input signals on the I/O Memory selection hardware that are used to generate the IORD signal on our board

(a) Recall that the simulated ROM of our computer is 16 x 4 bits. If we had 32 x 4bits of ROM, would it be possible for us handle all of the instructions with our current setup? If yes/no then why? (b) If our current setup does not allow us to handle all instructions in the 32 x 4bits ROM, are there 1. any specific modifications that would allow us to?

a)Discuss 5 differences between standard microprocessors and microcontrollers b)Describe the RISC design philosophy c)List and describe 10 features of the Atmel ATmega2560 AVR microcontroller

Can you name a few potential uses for the logic synthesis device?

5 Note: Please do not handwritten.

Discuss the role of VRMs (Voltage Regulator Modules) on a motherboard and their impact on CPU overclocking and stability.

28)Which of the following elements does not affect how a ladder logic program is developed? A)The type, direct or inverse acting, and active state of the output field devices. B)The choice of normally-open and normally-closed instructions for the PLC program. C)The contact type and active state of the input field devices. D)The requirement for current sinking or sourcing inputs and outputs.

5.3 A clock signal as a continuous sequence of pulses is applied to a logic gate and is to be outputted only when an enable signal is also applied to the gate. What logic gate can be used?