geerlingguy wrote: ↑

Thu Oct 02, 2025 7:27 pm

I've been testing for a couple days with nightlies, and switched over to the official image today. Nice thing is it has a lot of newer packages, which means some of my hacky tweaks don't need to be made anymore.

There are a few little speedbumps, but now that the official image is here, other people can adjust their own scripts to handle Trixie well out of the box too! I like the new default background, it is a little simpler in style, and doesn't *seem* to confuse my camera's exposure quite as much (niche problem, but hey!).

Olydnad_SWE wrote: ↑

Thu Oct 02, 2025 7:20 pm

dwam wrote: ↑

Thu Oct 02, 2025 6:52 pm

It's been discussed before in the beta section but maybe this thread will get more attention.

It seems there is something wrong with the "remove safely" feature from PCmanFM and the taskbar. Removable media connected with USB fail to eject properly in Trixie.

I have posted a detailed description of the issue here:
viewtopic.php?p=2340654#p2340635
as well as the commands I use to overcome this problem and prevent my disks from being corrupted

It'd be great if more people could confirm this issue

I tried it, and for me it worked. I've only tested a USB stick so can't answer if it always works.

Chimneyfactory wrote: ↑

Thu Oct 02, 2025 8:42 pm

I'm currently installing Trixie on a spare SSD, but saw a small problem along the way that might be related to Trixie or might not.

When I opened Raspberry Pi Imager on my existing 64 Bit Bookworm install, it told me that there was a newer version and sent me to the website.

But I am fully up to date with apt update && apt full-upgrade. So how is there a newer version I've missed?

Is it because the version of raspberry pi imager being checked against is a newer Trixie version that I don't have yet because I'm still on Bookworm?

My version of Raspberry Pi Imager is 1.9.4

Code: Select all

me@mypi:~ $ sudo apt install rpi-imager
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
rpi-imager is already the newest version (1.9.4).
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.

Anyway, that aside, I've already written the image and about to boot from it to have a look at it.

thanks all!

robertojguerra wrote: ↑

Thu Oct 02, 2025 5:52 pm

SteveSpencer wrote: ↑

Thu Oct 02, 2025 5:24 pm

Did a 32-bit clean install of desktop on a 3B+ with original Pi Touchscreen. Looks good, and is reasonably responsive.
I notice there is no rpi-imager available. Is this 'in the works'? I tried apt install rpi-imager and there are packages that can't be resolved.

(Did the original imaging on my trusty Pi4 desktop bookworm installation, since I am unable to get any version of rpi-imager for Windows working on my Win10 Thinkpad W520, which I keep meaning to dig into and work out why, but I've been a bit busy with other things).

Also did an apt update/apt upgrade, and I like the Trixie changes to apt, especially that apt list no longer tells me the CLI is unstable..

It amazed me that there's still support for 32 bits... but I still don't know who needs it (besides Raspberry 2 an elder owners).

This is not a rhetorical question: what apps are forcing you to use 32 bits?

Beware of pip packages that stopped distributing 32 bits and compel you to compile them (like numpy).

How does the new labwc theme look in a 480x320 pixel LCD?

saud wrote: ↑

Fri Oct 03, 2025 6:38 am

PHP 8.4 does not work with 32-bit, tested with php-fpm nginx and php8.4 apache, none worked, PHP would not start on Raspberry pi 1.

tigernero wrote: ↑

Fri Oct 03, 2025 8:17 am

I'm trying to enable port forwarding in PIOS Trixie to get Wireguard to work properly. But I noticed that the sysctl.conf file is missing. Why?
I usually ran the following command:

Code: Select all

sudo perl -pi -e 's/#{1,}?net.ipv4.ip_forward ?= ?(0|1)/net.ipv4.ip_forward = 1/g' /etc/sysctl.conf

and it enabled "net.ipv4.ip_forward=1".
Can I create it manually, or have things changed?
Why am I getting the error: Can't open /etc/sysctl.conf: File or directory does not exist?

sudo sysctl -a

nano /etc/sysctl.d/tigernero.conf

jordana wrote: ↑

Fri Oct 03, 2025 12:20 pm

Using Connect to my pi500 on a 1080p monitor but the resolution is low 720p at best and in new Control Center I can not even find how to change. Please help!

jpgview wrote: ↑

Fri Oct 03, 2025 8:39 am

in order to prevent resizing on first use,

I edited cmdline.txt and removed the strikethrough text

bookworm (works):
console=serial0,115200 console=tty1 root=PARTUUID=8acef004-02 rootfstype=ext4 fsck.repair=yes rootwait quiet (削除) init=/usr/lib/raspberrypi-sys-mods/firstboot (削除ここまで)

trixie (doesn't work):
console=serial0,115200 console=tty1 root=PARTUUID=7351b90c-02 rootfstype=ext4 fsck.repair=yes rootwait (削除) resize (削除ここまで)

how can I prevent auto resizing in trixie?

dwam wrote: ↑

Fri Oct 03, 2025 12:42 pm

jordana wrote: ↑

Fri Oct 03, 2025 12:20 pm

Using Connect to my pi500 on a 1080p monitor but the resolution is low 720p at best and in new Control Center I can not even find how to change. Please help!

In rpcc,
resolution.png