tag:blogger.com,1999:blog-344806192025年10月21日T14:00:48.972-05:00Physics and PhysicistsZapperZ's physics blog on the world of Physics and Physicists.ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.comBlogger3827125tag:blogger.com,1999:blog-34480619.post-21490850554519414822025年10月08日T14:21:00.002-05:002025年10月08日T14:21:14.353-05:002025 Nobel Prize in Physics<p>It's unusual that a Nobel Prize in Physics is given to physicists working in the field that was the same as my PhD research work. It f<a href="https://www.nobelprize.org/prizes/physics/2025/summary/" target="_blank">inally happened</a> this year.</p><p>I did research work in tunneling spectroscopy in cuprate superconductors, and we did both superconductor-insulator-normal metal and superconductor-insulator-superconductor tunnel junctions, the latter of which is where we observe the Josephson tunneling current. Therefore, the work cited here is something that I'm quite familiar with. I just never realized till now that it was such a major discovery to be awarded a Nobel Prize. I know that one of my colleagues had John Clarke as his PhD advisor at Berkeley.</p><p>Interesting that this is such an old and well-established phenomenon and technique that is only now being recognized.</p><p>Zz.&nbsp;</p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-1107914065691033832025年07月09日T13:18:00.007-05:002025年07月09日T13:18:30.969-05:00A Century of Quantum Mechanics<p>CERN Courier has a <a href="https://home.cern/news/news/physics/century-quantum-mechanics" target="_blank">special issue</a> this month celebrating what they consider as the 100th anniversary of Quantum Mechanics.</p><p>Of course, the focus here is predominantly on elementary/particle physics. And yet, many of the most obvious demonstration and manifestation of quantum mechanics can be found not in particle physics, but in condensed matter physics. The Schrodinger-Cat type demonstration using SQUIDs, and the clearest manifestation of the effect of coherence can be seen in condensed matter experiment. To quote Carver Mead's article[1]:</p><p></p><blockquote>Although superconductivity was discovered in 1911, the recognition that superconductors manifest quantum phenomena on a macroscopic scale (4) came too late to play a role in the formulation of quantum mechanics. Through modern experimental methods, however, superconducting structures give us direct access to the quantum nature of matter. The superconducting state is a coherent state formed by the collective interaction of a large fraction of the free electrons in a material. Its properties are dominated by known and controllable interactions within the collective ensemble. The dominant interaction is collective because the properties of each electron depend on the state of the entire ensemble, and it is electromagnetic because it couples to the charges of the electrons. Nowhere in natural phenomena do the basic laws of physics manifest themselves with more crystalline clarity.</blockquote><p></p><p>Zz&nbsp;</p><p>&nbsp;[1] C.A. Mead, PNAS v.94, p.6013 (1997); or you may be able to access it <a href="http://www.pnas.org/cgi/content/abstract/94/12/6013?maxtoshow=&amp;HITS=10&amp;hits=10&amp;RESULTFORMAT=&amp;fulltext=carver+mead&amp;searchid=1&amp;FIRSTINDEX=0&amp;resourcetype=HWCIT">here</a>. </p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-43819334122543003152025年07月08日T10:30:00.003-05:002025年07月08日T10:30:31.271-05:00Another Sighting of a Possible Fifth Force?<p>First of all, I'm old! I started being in a student in physics since the early 1980's (do your own math). During all of that time when I have paid attention to physics, I've seen a lot of major milestones, including the discovery of High-Tc superconductors, discovery of exoplanets, the cold-fusion debacle, etc...etc.</p><p>The one thing that pops up every now and then is the claim of the possible discovery of this "fifth force". Honestly, even back in the 1980's, there were already such claims being made. None of the have amounted to anything as far as I can tell. Therefore, you can understand my "<i>Oh no, this again</i>?" reaction when I read the <a href="https://physics.aps.org/articles/v18/s73" target="_blank">latest claim</a> of the possible detection of the Yukawa particle as an indication of the existence of this fifth force (that article contains a link to the actual PRL paper that you can download).</p><p>This is not a knock on this work, heavens no. But the publicity surrounding this makes it sound as if this has not happened before. I guess it is not surprising that people have short memory, which is why mistakes are often repeated.</p><p>I'm going to wait a year and revisit this post and see if we have gone beyond first based on this discovery.</p><p>Zz.&nbsp;</p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-46983269165327026262025年07月01日T10:59:00.005-05:002025年07月01日T10:59:36.069-05:00A Century of Bose-Einstein Condensation<p>Nature has published a <a href="https://www.nature.com/articles/s42005-025-02195-x" target="_blank">wonderful review</a> of the discovery and progress that we have made in understanding BE condensation since its discovery. It is an open access article and you can download the full article. I definitely like the figure that shows the major milestone in its development, but it would be nice if that is expanded even more to include references, or at least citation numbers so that I don't have to go hunting for them.&nbsp;</p><p>Scanning through the article, I actually did a quick headcount on how many of the names mentioned in the article that I had met personally: Schrieffer, Leggett, Anderson, and Abrikosov. I believe Leggett is the only one still around as of this writing.</p><p>I didn't get too much into BE condensation even though I was working in superconductivity at that time. I was transitioning out of that field of study when the big BEC-BCS connection was experimentally established. Still, it was, and still, an exciting field to follow even on the peripheral.</p><p>Zz.&nbsp;</p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-59918321426379726172025年02月23日T09:50:00.004-06:002025年02月23日T09:50:49.313-06:00Did I Expect Too Much?<p>In one of my exam questions, I gave the students the average radius of Earth's orbit around the Sun at 150 million km. I told them that we can assume that the orbit is circular. I even gave them the formula for the circumference of a circle.</p><p>The question then asked them to find the speed of the Earth as it moves around the Sun.</p><p>After the exam and after the results were published, a number of students told me that I did not give them enough information to solve the problem. They said that they could figure out the circumference of the circle to correspond with the distance that the Earth has traveled, but they don't have any information on the time of travel and thus, can't find the speed.</p><p>I argued that they should know this because it is common knowledge.</p><p>Did I expect too much? Did I make the wrong assumption that everyone (especially 1st and 2nd year university students) knows that it takes the Earth one year to make one complete orbit around the Sun? Was this something I should have given them?</p><p>Zz. <br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com1tag:blogger.com,1999:blog-34480619.post-61490472978489671242025年02月05日T09:15:00.007-06:002025年02月05日T09:16:18.092-06:00100 Years of Quantum Mechanics<p>I mentioned earlier of an <a href="https://physicsandphysicists.blogspot.com/2025/02/the-davisson-germer-experiment.html" target="_blank">article on the Davisson-Germer's experiment</a> as part of the commemoration of 100 anniversary of Quantum Mechanics (QM). This is <a href="https://www.sciencenews.org/article/quantum-mechanics-physics-turns-100" target="_blank">an article</a> describing a bit more of the celebration and the importance of QM. Hint: without QM, none of your modern electronics (computers, smartphones, etc.) will work.</p><p>Zz.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-4337231645511467992025年02月04日T09:30:00.005-06:002025年02月04日T09:30:57.807-06:00The Davisson-Germer Experiment<p>As we continue to celebrate 100 years of Quantum Physics, this is a <a href="https://physics.aps.org/articles/v18/23" target="_blank">fun account</a> of the famous Davisson-Germer experiment that was the first to demonstrate the wave-like nature of electrons.</p><p>It's interesting that, at the end of the article, it was pointed out that this experiment did not originally was set out to seek the experimental evidence for the wave-like nature of electrons. They were intended to do something else, and then learned about something, and adapted it later. This is not really that unusual. The first thing that popped into my head was the <a href="https://www.aps.org/apsnews/2002/07/discovery-cosmic-microwave-background" target="_blank">discovery of the cosmic microwave background</a> (CMB) by Wilson and Penzias. They certainly were not looking for the CMB with their microwave antenna. It was a serendipitous discovery. In fact, one can even say that the <a href="https://pubs.aip.org/physicstoday/article/63/9/38/386608/The-discovery-of-superconductivityA-century-ago">discovery of superconductivity</a> also came out of an experiment that was not designed to look for it, because no one knew at that time that such a thing could exist.</p><p>One could say that this is another one of those "Who Ordered That" scenario. </p><p>Zz.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-6256198168601275692025年01月24日T09:52:00.000-06:002025年01月24日T09:52:00.829-06:005 Physics Equations Everyone Should Know<p>Rhett Allain posted this article on Wired on the <a href="https://www.wired.com/story/5-physics-equations-everyone-should-know/" target="_blank">5 physics equation that "everyone" should know</a>. They are, in the order that was presented:</p><ol style="text-align: left;"><li>Newton's 2nd Law of motion</li><li>The wave equation</li><li>Maxwell's equations (he cheated a bit because this is a set of 4 equations)</li><li>Schrodinger's equation (natch!)</li><li>Einsten's energy-mass equivalence equation <br /></li></ol><p>You can read the article to see what he has to say about each. I'm going to show this article to my students and see what they think, or maybe ask the how many of these do they think we will encounter in the course.</p><p>Zz.<br /></p><p><br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-22869288169504215102024年04月18日T13:24:00.004-05:002024年04月18日T13:24:41.937-05:00Double Slit Ahead of Single Slit?<p>This is similar to my earlier query regarding the sequence of topics that are introduced. My <a href="https://physicsandphysicists.blogspot.com/2023/01/which-comes-first-energy-or-momentum.html" target="_blank">earlier post</a> was the order of introducing the concept of energy and the concept of momentum. In this post, it is the issue of the sequence of introducing the double slit interference ahead of the single-slit diffraction.</p><p>This sequence is done in Knight's text "Physics for Scientists and Engineers". I don't follow that sequence because I prefer to introduce the single-slit diffraction first, show the diffraction pattern, and then introduce the double slit. The fact that the double slit pattern has interference pattern inside a single-slit diffraction envelope is easier to explain after the students already know about the single-slit diffraction.</p><p>What do you think? How did you teach this topic, or how did you learn this topic?</p><p>Zz.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com1tag:blogger.com,1999:blog-34480619.post-66856831527325456832024年04月06日T09:00:00.007-05:002024年04月06日T09:00:39.752-05:00Livestream of Total Solar Eclipse 2024<p>The US National Science Foundation (NSF) will be livestreaming the total Solar Eclipse of 2024. Here is the blurb from them:</p><div> <p style="font-family: helvetica; font-size: 16px; line-height: 1.4; margin: 0 0 15px;"><span style="line-height: 1.4;"></span></p></div><blockquote><div><p style="font-family: helvetica; font-size: 16px; line-height: 1.4; margin: 0 0 15px;"><span style="line-height: 1.4;">Don't just watch the eclipse — explore it. On April 8, the U.S. National Science Foundation and the NSF National Solar Observatory are hosting an educational livestream all about the science of the sun.&nbsp;</span><span style="line-height: 1.4;">&nbsp;</span></p> </div> <div> <p style="font-family: helvetica; font-size: 16px; line-height: 1.4; margin: 0 0 15px;"><span style="line-height: 1.4;">The livestream is a free resource that educators can use in their classrooms to share the excitement of science.&nbsp;</span><span style="line-height: 1.4;">&nbsp;</span></p> </div> <div> <p style="font-family: helvetica; font-size: 16px; line-height: 1.4; margin: 0 0 15px;"><span style="line-height: 1.4;">You'll hear from scientists about the unique experiments happening during the eclipse. As we count down to the moment of totality, you'll learn about:&nbsp;</span><span style="line-height: 1.4;">&nbsp;</span></p> </div> <div> <div> <ul style="margin-bottom: 15px; margin-top: 0px;"><li aria-setsize="-1" style="font-family: helvetica; font-size: 16px; line-height: 1.4; margin-top: 0px;"> <span style="line-height: 1.4;">The different layers of the sun, from the core to the corona.</span><span style="line-height: 1.4;">&nbsp;</span> </li><li aria-setsize="-1" style="font-family: helvetica; font-size: 16px; line-height: 1.4;"> <span style="line-height: 1.4;">The world's largest, most advanced solar telescope.&nbsp;</span><span style="line-height: 1.4;">&nbsp;</span> </li><li aria-setsize="-1" style="font-family: helvetica; font-size: 16px; line-height: 1.4; margin-bottom: 15px;"> <span style="line-height: 1.4;">How massive solar eruptions generate space weather.</span><span style="line-height: 1.4;">&nbsp;</span> </li></ul> </div> <div> <p style="font-family: helvetica; font-size: 16px; line-height: 1.4; margin: 0 0 15px;"><span style="line-height: 1.4;">It all happens on YouTube on April 8 starting around 11 a.m. PDT/noon MDT/1 p.m. CDT/2 p.m. EDT.</span></p></div></div></blockquote><div><div><p style="font-family: helvetica; font-size: 16px; line-height: 1.4; margin: 0 0 15px;"><span style="line-height: 1.4;"></span></p><p style="font-family: helvetica; font-size: 16px; line-height: 1.4; margin: 0 0 15px;"><span style="line-height: 1.4;">&nbsp;<a href="https://www.youtube.com/live/qAZmtbTTQAE?si=AKttYJOJT32g-Q3O">https://www.youtube.com/live/qAZmtbTTQAE?si=AKttYJOJT32g-Q3O</a></span></p><p style="font-family: helvetica; font-size: 16px; line-height: 1.4; margin: 0 0 15px;"><span style="line-height: 1.4;">&nbsp;</span></p> </div> </div><p></p> <iframe width="560" height="315" src="https://www.youtube.com/embed/qAZmtbTTQAE?si=AKttYJOJT32g-Q3O" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-42429726491487269842024年04月05日T08:56:00.001-05:002024年04月05日T08:57:01.179-05:00Doppler Ultrasound Uses Confusing Color Scheme<p>In my algebra-based General Physics courses, I get many Biology/Pre-med/Life Science majors, so of course many of the examples that I choose tend to be related to those areas. When we cover traveling waves and Doppler effect, I dive into medical diagnostics to show a few of the applications of Doppler effect in that area.</p><p>Interestingly enough, in Doppler Ultrasound, the color scheme that they use tend to be a bit confusing with what we use in physics. In the Doppler effect, when the source of a wave, or the source that is reflecting the wave, is moving away from the observer, the wavelength will be longer than the original wave. We popularly say that the wave has been "redshifted". This is because in the visible spectrum, the longest wavelength is toward the red color.</p><p>Conversely, if the object is moving toward the observer, then the wavelength will be shortened, and thus, "blueshifted", since blue (or violet) is the shortest wavelength in the visible spectrum.</p><p>But this is not the color scheme adopted in the field of Doppler Ultrasound, as represented in this video:</p><p><br /><iframe width="560" height="315" src="https://www.youtube.com/embed/9nzkF0hmy04?si=3S5dtdh9sMCqyGC4" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe> </p><p>It seems that if the flow is toward the transducer, it is given the red color while if the flow is going away from the transducer, it is given a blue color.</p><p>Obviously, this is not a source of confusion for people in that field since they don't normally encounter those color-shifted lexicon, but for students who are studying this topic for the very first time, this takes a bit of an effort to make sure they do not become confused with the contradicting color scheme. The first time I used the Doppler ultrasound example was, unfortunately, right after I discussed an example from astronomy where I indicated that most of the light from the galaxies are redshifted and thus, a strong evidence that the universe is expanding since those galaxies are moving away from us. You can imagine that the students who were paying attention got a bit confused because the blood flowing away from the transducer is now being labeled with blue color instead of red.</p><p>Does anyone know why this field adopts this color scheme?&nbsp;</p><p>Zz.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-77994170305402480832024年04月01日T10:19:00.003-05:002024年04月01日T10:19:27.190-05:00AI Will Pick Nobel Prize Winners in Physics<p>Please read the <a href="https://physicsworld.com/a/artificial-intelligence-will-help-pick-nobel-prize-for-physics-winners/" target="_blank">article</a> carefully before you freak out. Hint: look at the date.<br /></p><p>Zz.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-44166509244007845522024年04月01日T10:14:00.004-05:002024年04月01日T10:14:40.696-05:00What's In A Physics Word?<p>This is a rather <a href="https://www.nature.com/articles/s42254-024-00717-0" target="_blank">fun article</a> in this week's Nature. It reveals some of the fascinating origin of words used in Physics and how they may not match the more common usage of the word.</p><p>All of us in physics (and in science) know of this, where we may use the same words that are used in everyday language, but they have very different meanings in physics. Unfortunately, for many people outside of physics, this can lead to a lot of confusion or misuse if they do not investigate or understand the meanings of those words as used in the context of physics. The word "spin" comes to mind when talking about the quantum spin of elementary particles.</p><p>Z.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-51205716380330176952024年03月29日T10:13:00.004-05:002024年03月29日T10:13:35.509-05:00My Favorite Web Application - Part 8<p>Previous posts:</p><p><a href="https://physicsandphysicists.blogspot.com/2022/02/my-favorite-web-applications-part-1.html" target="_blank">My favorite web applications - Part 1</a></p><p><a href="https://physicsandphysicists.blogspot.com/2022/03/my-favorite-web-applications-part-2.html" target="_blank">My favorite web applications - Part 2</a></p><p><a href="https://physicsandphysicists.blogspot.com/2022/03/my-favorite-web-applications-part-3.html" target="_blank">My favorite web applications - Part 3</a></p><p><a href="https://physicsandphysicists.blogspot.com/2022/03/my-favorite-web-applications-part-4.html" target="_blank">My favorite web applications - Part 4</a></p><p><a href="https://physicsandphysicists.blogspot.com/2022/05/my-favorite-web-applications-part-5.html" target="_blank">My favorite web applications - Part 5</a></p><p><a href="https://physicsandphysicists.blogspot.com/2022/06/my-favorite-web-applications-part-6.html" target="_blank">My favorite web application - Part 6</a></p><p><a href="https://physicsandphysicists.blogspot.com/2023/03/my-favorite-web-applications-part-7.html" target="_blank">My favorite web application - Part 7</a></p><p>This is another one of my favorite web application because it has a ability to assign random values to various parameters in the problem.</p><p>This is a simulation of a motional emf in the form of a rail gun. It actually is a straight-forward application of magnetic force acting on a straight current. One may also solve this using Faraday's law, but it is not as straight-forward to solve because the magnetic flux (or rather, the area) does not change uniformly since the rod is accelerating.</p><p>What I also like about this simulation is that one can also tie in with what the students learned in Physics 1, i.e. they may verify their answer using kinematics, since we know the rod's mass, and it starts moving from rest. Knowing how far it travels and a good estimate of the time of travel gives us the value of the acceleration, and thus, the force acting on the rod. This should match with the magnetic force.</p><p>Zz.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-62691310633691084842023年09月26日T15:24:00.002-05:002023年09月26日T15:24:15.447-05:00I Baked Cookies For My Students<p>A while back, I wrote <a href="https://physicsandphysicists.blogspot.com/2016/09/drilling-in-importance-of-units-via.html" target="_blank">an article</a> on how to impress upon the students of the need have units in most of the numbers that they write in physics. I gave them a recipe for a banana bread, but I left out all the units of measure. It was the students themselves who noticed what was wrong with the recipe, so in the process, I managed to convey to them that (i) without units, these numbers are meaningless and (ii) this is not just something in physics (or science) but rather something common that we encounter and take for granted.</p><p>Over the Summer, I did the same thing but I showed them a recipe for my often-requested Chewy Oatmeal Cranberry cookies. Same reaction. But the difference happened at the end of the arduous and intense 8-week summer session. On the 2nd to last day of the class (last day was the final exam), after we did our review, I showed them again the cookie recipe and asked them if they remembered why I was showing them the recipe. All of them did.</p><p>I then whipped out a container that had the very same cookies, from the recipe, that I had baked the day before. Oh yeah, they were pleasantly surprised! We basically came full circle, and had a lovely time the last 15 minutes of class time as we sat around chatting and munching on the cookies. Even the coffee machine was nearby and a few of us got some coffee to go along with the cookies.</p><p>It was a wonderful end to the class, in my opinion. I am considering this Fall semester if I want to do that again. I just might, if I can find the time.</p><p>Zz.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-69708555783501527402023年07月28日T07:57:00.007-05:002023年07月28日T07:57:33.580-05:00The Unseen Impact of Physics In Healthcare<p>This is a nice <a href="https://www.thestar.com.my/lifestyle/health/2023/07/26/beyond-the-human-eye-the-unseen-impact-of-physics-in-healthcare">news article</a> that provides a basic summary of the applications of physics in healthcare and medicine. It's another one of those where if someone thinks physics only deals with esoteric and useless ideas, show him/her this. I've mentioned many examples of similar medical/health/etc. applications and concepts that came directly from physics, such as <a href="https://physicsandphysicists.blogspot.com/2017/03/raman-spectroscopy-used-to-detect-skin.html" target="_blank">this one</a>.</p><p>As someone who often teaches general physics to life science/premed/bio/kinesiology major, this is definitely another useful evidence to get them to realize that the physics class they are taking has a direct relevance to their area of study.</p><p>Zz.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-51296382735964618352023年07月14日T06:49:00.002-05:002023年07月14日T06:49:14.685-05:00Since When Does A "Proposal" Become "Evidence"?<p>It's one of the reasons why I groan at popular media's reporting of science.</p><p><a href="https://www.yahoo.com/finance/news/incredible-evidence-symmetry-violation-may-150000312.html" target="_blank">This article</a> is reporting on <a href="https://journals.aps.org/prl/abstract/10.1103/PhysRevLett.130.201002" target="_blank">a paper</a> that proposes a possibility of finding evidence of large-scale symmetry breaking from the&nbsp; data ".. <i>in current and upcoming surveys such as those undertaken by Dark Energy Spectroscopic Instrument, the Euclid satellite, and the Vera C. Rubin Observatory</i>.... ". Yet, the article is trumpeting the "<i>Incredible new evidence</i>...." as if it has been found. This is similar to accepting speculation as the truth.</p><p>Over-selling and over-hyping science does no one any good, other than making it a click-bait.</p><p>Z.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-65005264378356851562023年07月14日T06:28:00.003-05:002023年07月14日T06:28:52.835-05:00The First 12 Months of the James Webb Space Telescope<p>Many of us knew that it would be a significant instrument. We just didn't know that in its early days, it would make this many discoveries.</p><p>In case you were asleep for most of the past 12 months, here is <a href="https://www.space.com/james-webb-space-telescope-first-year-science" target="_blank">an article</a> that will highlight some of the groundbreaking discoveries made by the JWST. It will not be hard to guess that there will be more earth-shattering (universe-shattering?) discoveries to be made in the next 12 months.</p><p>Zz.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-55061700602849647582023年04月05日T17:37:00.004-05:002023年04月05日T17:37:38.401-05:00ChatGPT and Projectile Motion, Part 2<p>If you missed my previous physics questions to ChatGPT, check them out <a href="https://physicsandphysicists.blogspot.com/2023/03/chatgpt-and-buoyant-force.html" target="_blank">here</a> and <a href="https://physicsandphysicists.blogspot.com/2023/03/chatgpt-and-projectile-motion.html" target="_blank">here</a>.&nbsp;</p><p>In this particular case, I asked ChatGPT a rather common question, and ended up having an argument with it. My questions are in red while ChatGPT's responses are in blue.<br /></p><p><span style="color: red;">Three projectiles of the same mass are launched from the top of a cliff with the same initial speed. The first projectile is launched at an angle of 20 degrees above the horizontal. The second is launched horizontally. The third is launched at an angle 20 degrees below the horizontal. Which projectile hit the ground with the largest speed?</span></p><p><span style="color: #2b00fe;"><br />All three projectiles are launched with the same initial speed, which means they all have the same initial kinetic energy. The only difference is the angle at which they are launched.</span></p><p><span style="color: #2b00fe;"><br />The maximum range of a projectile launched at a given speed is achieved when it is launched at an angle of 45 degrees above the horizontal. This means that the first and third projectiles will have the same range, but the second projectile, launched horizontally, will have a shorter range.<br />However, the question asks which projectile hits the ground with the largest speed, not which has the greatest range. To answer this question, we need to consider the vertical component of each projectile's velocity at impact.</span></p><p><span style="color: #2b00fe;"><br />The first projectile is launched at an angle of 20 degrees above the horizontal, so it will have a significant vertical component of velocity at impact, causing it to hit the ground with a larger speed than the third projectile, which is launched at an angle of 20 degrees below the horizontal and will have a smaller vertical component of velocity at impact.</span></p><p><span style="color: #2b00fe;"><br />The second projectile, launched horizontally, will have no vertical component of velocity at impact, so it will hit the ground with the smallest speed of the three projectiles.</span></p><p><span style="color: #2b00fe;"><br />Therefore, the first projectile, launched at an angle of 20 degrees above the horizontal, will hit the ground with the largest speed.</span></p><p></p><p>It started off so well, realizing that all three have the same KE. But then, after it answered something that wasn't asked (the range), it went on to be obsessed with the vertical component of the velocity.</p><p>I decided to challenge its answer.</p><p><br /><span style="color: red;">But they all have the same initial energy in the beginning. Shouldn't they have the same energy at the bottom when they hit the ground?<br /></span><br /><span style="color: #2b00fe;">You're correct that all three projectiles have the same initial kinetic energy, and conservation of energy tells us that the total energy of the system must be conserved throughout the motion. Therefore, at the bottom of the cliff, all three projectiles will have the same total energy as they did at the top of the cliff.</span></p><p><span style="color: #2b00fe;"><br />However, the question specifically asks which projectile hits the ground with the largest speed, not which has the most kinetic energy. The speed of a projectile at any point during its motion depends not only on its kinetic energy but also on its direction and the effects of external forces such as gravity and air resistance.</span></p><p><span style="color: #2b00fe;"><br />In the case of these three projectiles, they all have different launch angles, which means they will follow different trajectories and experience different vertical and horizontal components of acceleration due to gravity. These differences will cause the projectiles to hit the ground with different speeds, even though they all have the same initial kinetic energy.</span></p><p><span style="color: #2b00fe;"></span>It's a bit puzzling what it is thinking at this point. If they have the same KE in the end, via conservation of energy, then should they also have the same speed?</p><p><br /><span style="color: red;">But kinetic energy is 1/2*m*v^2. If they have the same kinetic energy, they should have the same speed.</span><span style="color: #2b00fe;"><br /><br />Yes, you are correct that the kinetic energy of an object is given by the formula KE = 1/2 * m * v^2, where m is the mass of the object and v is its velocity. If three projectiles of the same mass are launched from the top of a cliff with the same initial speed, they will all have the same initial kinetic energy, and therefore the same total energy throughout their motion.<br />&nbsp;</span></p><p><span style="color: #2b00fe;">However, as the projectiles follow their different trajectories, they will experience different amounts of air resistance and vertical and horizontal components of acceleration due to gravity. These differences in the forces acting on the projectiles will affect their velocities as they reach the ground.<br />The projectile launched horizontally will experience no vertical acceleration due to gravity, so it will not gain any speed in the vertical direction as it falls, only in the horizontal direction. The first and third projectiles, on the other hand, will experience significant vertical accelerations due to gravity, which will affect their speeds at impact.<br />&nbsp;</span></p><p><span style="color: #2b00fe;">Therefore, even though all three projectiles have the same initial kinetic energy, the projectile launched at an angle of 20 degrees above the horizontal will hit the ground with the largest speed due to the combination of its initial horizontal velocity and the vertical velocity gained as it falls.</span></p><p><br /><span style="color: red;">How can the projectile launched horizontally not experience vertically acceleration due to gravity? After all, it is falling to the ground!</span><br /><br /><span style="color: #2b00fe;">You are correct that a projectile launched horizontally will experience vertical acceleration due to gravity, and it will also fall to the ground just like the other two projectiles.</span></p><p><span style="color: #2b00fe;"><br />What I meant to say is that the horizontal component of the velocity of the projectile launched horizontally will remain constant throughout its motion, since there are no external forces acting on it in the horizontal direction. This means that the horizontal velocity of the projectile will be the same at the top of the cliff and at the moment it hits the ground.</span></p><p><span style="color: #2b00fe;"><br />However, the vertical component of the velocity of the projectile launched horizontally will increase due to the acceleration of gravity. At the top of the cliff, the vertical component of the velocity is zero, but as the projectile falls, the vertical velocity will increase, and the projectile will hit the ground with a non-zero vertical speed.<br />&nbsp;</span></p><p><span style="color: #2b00fe;">Therefore, while the horizontal velocity of the horizontally launched projectile remains constant, the vertical component of its velocity will increase due to gravity, resulting in a non-zero speed at impact. However, since the horizontal velocity of the projectile remains constant, it will hit the ground with the smallest speed of the three projectiles.<br /></span>&nbsp;</p><p><span style="color: red;">The question asks about the speed, not the velocity. All three gain in speed as it falls to the ground. If their kinetic energy is the same, their speeds must be the same.</span><br /><br /><span style="color: #2b00fe;">You are correct that the question asks about the speed of the projectiles, not the velocity. The speed of an object is the magnitude of its velocity, and it is calculated by taking the absolute value of its velocity vector.<br />&nbsp;</span></p><p><span style="color: #2b00fe;">If all three projectiles have the same initial kinetic energy, then they must have the same initial speed. As the projectiles fall, they will gain speed due to the force of gravity.<br />&nbsp;</span></p><p><span style="color: #2b00fe;">Therefore, at the moment of impact, all three projectiles will have the same kinetic energy, which means they will have the same speed. The angle at which the projectiles are launched and the resulting trajectories they follow may affect their final velocities, but their final speeds will be the same since they all have the same kinetic energy at impact.</span></p><p><span style="color: #2b00fe;"></span><br /><span style="color: #2b00fe;">So, to answer the original question, all three projectiles will hit the ground with the same speed, even though they were launched at different angles.</span><br /></p><p>Phew!! That felt like pulling teeth!</p><p>It was as if it doesn't know the difference between speed and velocity, and I'm wondering if it was arguing with me about the vertical component of the velocity. It still makes no sense because clearly I explicitly mentioned "speed" at the very beginning.</p><p>Once again, if you don't know what you are looking for, there is no guarantee that you'll get the correct answer and consistent explanation.</p><p>Zz. <br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-85800652856279836702023年03月29日T07:39:00.006-05:002023年03月29日T07:42:43.854-05:00ChatGPT and Buoyant Force<p>I posted previously about <a href="https://physicsandphysicists.blogspot.com/2023/03/chatgpt-and-projectile-motion.html" target="_blank">ChatGPT's response to a projectile motion question</a>. It got the answer correct, but with a wrong starting point, which made the whole response rather puzzling, inconsistent, and self-contradictory.</p><p>This time, I decided to ask a question that I had asked my students in a poll during a lesson on buoyancy and Archimedes principle.</p><p dir="ltr" id="docs-internal-guid-ea7addae-7fff-c4e6-0d2a-4b6af401651a" style="line-height: 1.38; margin-bottom: 0pt; margin-top: 0pt;"></p><p><span style="color: red;">A block of Styrofoam floats on water while a lead block of the same size block lies submerged in the water. Which one has the larger buoyant force?</span></p><p></p><p dir="ltr" style="line-height: 1.38; margin-bottom: 0pt; margin-top: 0pt;"><span style="background-color: transparent; color: #2b00fe; font-family: Arial; font-size: 11pt; font-style: normal; font-variant: normal; font-weight: 400; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">The buoyant force on an object is equal to the weight of the fluid displaced by the object. The Styrofoam block is less dense than water and floats because it displaces an amount of water equal to its own weight, which is equal to the buoyant force acting on it. On the other hand, the lead block is more dense than water and sinks because it displaces an amount of water that is less than its own weight.</span></p><span style="color: #2b00fe;"><br /></span><p dir="ltr" style="line-height: 1.38; margin-bottom: 0pt; margin-top: 0pt;"><span style="background-color: transparent; color: #2b00fe; font-family: Arial; font-size: 11pt; font-style: normal; font-variant: normal; font-weight: 400; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Therefore, the Styrofoam block has a larger buoyant force acting on it than the lead block of the same size because it displaces more water.</span></p><p></p><p>This time, ChatGPT got the answer wrong. Unlike the first time, it started out with the correct idea, which is that the buoyant force is equal to the weight of the displaced fluid.</p><p>However, in this case, the Styrofoam is displacing a very small amount of fluid because it is floating above the surface, while the lead block is completely submerged in the water, displacing its entire volume. This means that the lead block is displacing a larger volume of the fluid, and thus, having a larger buoyant force, despite it sinking in the water.</p><p>So in this case, ChatGPT once again exhibits its inconsistent and self-contradictory behavior.</p><p>I followed up trying to correct this error.<br /></p><p dir="ltr" style="line-height: 1.38; margin-bottom: 0pt; margin-top: 0pt;"><span style="background-color: transparent; color: red; font-family: Arial; font-size: 11pt; font-style: normal; font-variant: normal; font-weight: 400; text-decoration: none; vertical-align: baseline; white-space: pre;">This is incorrect. The lead block displaces more water than the Styrofoam.</span></p><br /><p dir="ltr" style="line-height: 1.38; margin-bottom: 0pt; margin-top: 0pt;"><span style="background-color: transparent; color: #2b00fe; font-family: Arial; font-size: 11pt; font-style: normal; font-variant: normal; font-weight: 400; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">You are correct, I apologize for the mistake in my previous answer. The buoyant force acting on an object is equal to the weight of the fluid displaced by the object, and the amount of fluid displaced depends on the volume of the object. Since the lead block and the Styrofoam block have the same volume, the lead block will displace more water than the Styrofoam block because it is denser.</span></p><span style="color: #2b00fe;"><br /></span><p dir="ltr" style="line-height: 1.38; margin-bottom: 0pt; margin-top: 0pt;"><span style="background-color: transparent; color: #2b00fe; font-family: Arial; font-size: 11pt; font-style: normal; font-variant: normal; font-weight: 400; text-decoration: none; vertical-align: baseline; white-space: pre-wrap;">Therefore, the lead block has a larger buoyant force acting on it than the Styrofoam block of the same size, even though it is submerged in the water while the Styrofoam block floats on the surface.</span></p><p></p><p>It gets it now, but it is arguing that the lead block displaces more water than the Stryrofoam because it is "denser". While that is somewhat correct, it is not the reason why it displaces more water. It is because it is completely submerged in the water and displaces a volume of water equal to its volume.<br /></p><p>If I reshape the same mass of lead into the shape of a bowl, the object itself will have the same "density", but this time, it can float on the water. It now displaces enough of the water such that the weight of the displaced water is equal to its weight, and thus, it will float. Granted that the whole "object" now includes the air that it encompasses so that its "total" density is less than the density of water, but the density of the lead itself hasn't changed. It is still denser than water but this time it floats!</p><p>Once again, if you don't know the material, it is hard to know whether you are being given not just the correct answer, but whether the whole response is consistent and not self-contradictory.</p><p>More to come.....</p><p>Zz.<br /></p><p><br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-5627320369484290452023年03月27日T17:14:00.018-05:002023年03月27日T17:18:37.314-05:00ChatGPT and Projectile Motion<p>In my previous post, I mentioned <a href="https://physicsandphysicists.blogspot.com/2023/03/my-favorite-web-applications-part-7.html" target="_blank">an exercise</a> that I often give to my General Physics students that are learning about projectile motion. Using a PhET application, they found out that two different scenarios produced a projectile motion that has the same maximum height and same time of flight. I asked the students to figure out why.</p><p>I decided to post the same question to ChatGPT. The result was a bit of an eye-opener. I will show my question (in red) and its response below:</p><span style="color: red;"><span style="font-family: Arial;">Why does a projectile shot with initial velocity of 20 m/s and angle 30 degrees with respect to the horizontal reach the same height as the projectile shot with initial velocity of 10 m/s and angle 90 degrees?<br /><br /><span style="color: #2b00fe;">The key to understanding this phenomenon is to recognize that the vertical motion of the projectile is independent of its horizontal motion.<br />For both projectiles, the initial vertical velocity is zero. The only force acting on the projectile in the vertical direction is gravity, which causes the projectile to accelerate downward at a rate of 9.8 m/s^2. The vertical displacement of the projectile can be determined using the formula:<br />Δy = v0y*t + (1/2)at^2<br />where Δy is the vertical displacement, v0y is the initial vertical velocity, a is the acceleration due to gravity, and t is the time elapsed.<br />Since the projectile that was shot with an initial velocity of 10 m/s at an angle of 90 degrees goes straight up, it reaches its maximum height when its vertical velocity becomes zero. At this point, the time elapsed is given by:<br />t = v0y/a<br />where v0y is the initial vertical velocity. Substituting in the values, we get:<br />t = (10 m/s) / (9.8 m/s^2) = 1.02 s<br />Using this value of t in the above formula, we get:<br />Δy = (0 m/s)(1.02 s) + (1/2)(9.8 m/s^2)*(1.02 s)^2 = 5.1 m<br />So, the projectile reaches a maximum height of 5.1 m before falling back down to the ground.<br />For the projectile that was shot with an initial velocity of 20 m/s at an angle of 30 degrees, we can break down its initial velocity into its horizontal and vertical components:<br />v0x = v0cos(30) = 17.3 m/s<br />v0y = v0sin(30) = 10 m/s<br />The horizontal motion of the projectile is uniform, meaning it moves with a constant velocity of 17.3 m/s. The time taken for the projectile to reach its maximum height is the same as the time taken for it to reach half the range of its motion (i.e., the distance it travels horizontally before hitting the ground). The formula for the time of flight is:<br />t = 2*v0y/a<br />Substituting in the values, we get:<br />t = (2*10 m/s) / (9.8 m/s^2) = 2.04 s<br />The horizontal distance traveled by the projectile can be calculated using the formula:<br />R = v0x*t<br />Substituting in the values, we get:<br />R = (17.3 m/s)*(2.04 s) = 35.3 m<br />The maximum height reached by the projectile can be determined using the formula for vertical displacement:<br />Δy = v0y*t + (1/2)at^2<br />Substituting in the values, we get:<br />Δy = (10 m/s)(2.04 s) + (1/2)(9.8 m/s^2)*(2.04 s)^2 = 5.1 m<br />So, the projectile that was shot with an initial velocity of 20 m/s at an angle of 30 degrees reaches the same maximum height of 5.1 m as the projectile that was shot with an initial velocity of 10 m/s at an angle of 90 degrees, despite traveling much farther horizontally before hitting the ground.</span><br /></span></span><p>Now, the answer is correct. In fact, it gave me more than what I asked for, i.e. it included the actual calculation of even the range, which I did not ask for.</p><p>However, its starting point is incorrect, and in fact, it is self-contradictory. It starts of by saying that the initial vertical velocity for both projectile is ZERO. This is clearly wrong.</p><p>Yet, a few lines down, it then mentioned and even found the vertical component of the initial vertical velocity, all while it was oblivious to what it just said in the beginning. So while the answer in the end may be correct, the reasoning, if we were to go by what it said, is puzzling and inconsistent.</p><p>I decided to challenge it by pointing out its mistake:</p><span style="color: red;"><span style="font-family: Arial;">You are mistaken about the initial vertical velocity being zero. For both projectiles, the initial vertical velocity is not zero.<br /><br /><span style="color: #2b00fe;">You are correct, I apologize for the mistake. The initial vertical velocity for the projectile shot with an initial velocity of 20 m/s and angle 30 degrees with respect to the horizontal is:<br />$v_{0y} = v_0 \sin \theta = 20 \text{ m/s} \sin 30^\circ = 10 \text{ m/s}$<br />And the initial vertical velocity for the projectile shot with an initial velocity of 10 m/s and angle 90 degrees with respect to the horizontal is:<br />$v_{0y} = v_0 \sin \theta = 10 \text{ m/s} \sin 90^\circ = 10 \text{ m/s}$<br />So, both projectiles have an initial vertical velocity of 10 m/s. The rest of the explanation and calculations remain the same.</span><br /></span></span><br /><p></p><p>This is now correct. Unfortunately, it requires someone who actually understands projectile motion to spot this. A student learning about it may not notice the inconsistency of the reasoning.</p><p>This seems to be the most common issue that I've come across and read about as far as scientific questions being asked to ChatGPT. This was similarly observed in <a href="https://physicsandphysicists.blogspot.com/2023/02/chatgpt-does-physics.html" target="_blank">another post that I wrote about</a>. ChatGPT response has correct parts, but there are also parts that are puzzling, contradictory, and often downright wrong, all within one response.<br /></p><p>There's more. In my next blog on ChatGPT, I asked it about buoyant forces. You don't want to miss that!</p><p>Zz.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-28624628952387972952023年03月25日T10:41:00.002-05:002023年03月29日T07:21:29.657-05:00My Favorite Web Applications - Part 7<p>Previous posts:</p><p><a href="https://physicsandphysicists.blogspot.com/2022/02/my-favorite-web-applications-part-1.html" target="_blank">My favorite web applications - Part 1</a></p><p><a href="https://physicsandphysicists.blogspot.com/2022/03/my-favorite-web-applications-part-2.html" target="_blank">My favorite web applications - Part 2</a></p><p><a href="https://physicsandphysicists.blogspot.com/2022/03/my-favorite-web-applications-part-3.html" target="_blank">My favorite web applications - Part 3</a></p><p><a href="https://physicsandphysicists.blogspot.com/2022/03/my-favorite-web-applications-part-4.html" target="_blank">My favorite web applications - Part 4</a></p><p><a href="https://physicsandphysicists.blogspot.com/2022/05/my-favorite-web-applications-part-5.html" target="_blank">My favorite web applications - Part 5</a></p><p><a href="https://physicsandphysicists.blogspot.com/2022/06/my-favorite-web-applications-part-6.html" target="_blank">My favorite web application - Part 6</a></p><p>This one is an obvious one. It is from PhET, and it is on <a href="https://phet.colorado.edu/sims/html/projectile-motion/latest/projectile-motion_en.html" target="_blank">projectile motion</a> (the "Lab" option).</p><p>I have used this web app in many different situations and for many different purposes, including using it as a virtual lab when we went remote. However, even in my face-to-face classes, I continue to use this during our lessons on projectile motion.</p><p>One of the most difficult concepts for students to understand with projectile motion is that the maximum height and the time-of-flight of the projectile depends only on the vertical component of the motion. If the vertical component of the motion remains the same, then regardless of what the horizontal component is doing, the maximum height and time-of-flight will be the same as well.</p><p>What I typically have the student do with the app is the following:</p><ul style="text-align: left;"><li>Set the canon to an angle of 30 degrees with respect to the horizontal and an initial speed of 20 m/s.</li><li>Fire away!</li><li>Measure the maximum height and the time of flight using the tools available in the app.</li><li>Then change the angle to 90 degrees and an initial speed of 10 m/s.</li><li>Fire away!</li><li>Again, measure the maximum height and time of flight.</li><li>Compare the two situations.</li></ul><p></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiOfDKn4beh5QTeJcZ-OU1GUVaqBMs_Ne_wp-D7bMoPDCRpWJTBbFiYsczgJZ5RHigcRdE11koFnujEpY9NJXrohh8sGYFMvdP-2a9A-htqeX7W_1w-ekcsMppz2ttp29mW2UMVY7s8uwoNDy8k_yx6zJjC7o15eEt59S59ki1IAtQ-zxNztw/s1302/projectile.jpg" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="644" data-original-width="1302" height="182" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiOfDKn4beh5QTeJcZ-OU1GUVaqBMs_Ne_wp-D7bMoPDCRpWJTBbFiYsczgJZ5RHigcRdE11koFnujEpY9NJXrohh8sGYFMvdP-2a9A-htqeX7W_1w-ekcsMppz2ttp29mW2UMVY7s8uwoNDy8k_yx6zJjC7o15eEt59S59ki1IAtQ-zxNztw/w369-h182/projectile.jpg" width="369" /></a></div>The students will find that for these two different situations, the maximum height and the time of flight are the same. I ask them to discuss this with their partner/s and figure out why these values come out this way. Then I ask them to find another angle and initial speed where the projectile gets to the same height and has the same time of flight.<p></p><p>Of course, the reason for this is that the vertical component of the initial velocity is the same for both situations. The is the only thing that the two motion has in common. Thus, since the maximum height and time of flight depends only on the vertical motion, the two different situations will naturally produce the same values for each of those two quantities. If they understand this, then they will be able to quickly find another angle and initial speed via simple calculation rather than by trial-and-error.</p><p>BTW, watch this space as I will be posting a link to an upcoming blog post of my interaction with ChatGPT on this same question that I ask my students.</p><p>Edit: This is <a href="https://physicsandphysicists.blogspot.com/2023/03/chatgpt-and-projectile-motion.html" target="_blank">my blog post</a> on what happened when I asked this projectile motion question to ChatGPT. <br /></p><p>Zz. <br /></p><p><br /></p><p></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-90967566605963295382023年03月16日T07:24:00.000-05:002023年03月16日T07:24:10.211-05:00Physics Can Be So Distracting!<p>I've been the internet for a very, very long time, longer than a lot of people have been alive. In all those years, I've had battle scars from my battle with weirdos and cranks of all kinds, especially during the early wild, wild west days of unmoderated Usenet. Even now, I have to deal with them frequently, both online at various forums, and of course, the occasional stuff that tried to appear on this blog.</p><p>So you'll understand when I say that dealing with physics cranks is such a major distraction that, often, I see something and the first thing that comes to mind is just that!</p><p>I was at a wonderful Turkish restaurant last week, and I knew about this dish called <a href="https://www.shutterstock.com/image-photo/authentic-turkish-testi-kebab-cooked-earthenware-1944031033" target="_blank">Testi Kebab</a>. I've seen it being served the last time I was at the same restaurant. I inquired about it, and our waiter described it and told us that if we wish to order that, they require a reservation a day in advance. This is because they bake the dish in this clay pot that is sealed. When they serve it, they literally break the pot and pour the content out. The broken clay pot is then tossed away, so they make a brand new clay pot each time this dish is ordered.</p><p>I immediately wanted to order that dish, and sure enough, we made a reservation for a group of people, and I ordered two of the dish, one large and one small, since there were 3 of us who wanted it. It was wonderful. The meat was lamb, and it came with vegetables stewed slowly in the sealed clay pot. After they broke the pots at our table, I asked if I could keep the broken pots, and they said yes.</p><p>I took them home, washed them, and they are now on display somewhere in my living room. But I have to tell you that as soon as I saw them when I got them home, the first thing that came across my mind was that I now have a couple of cracked pots in my house!</p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhBHSzj24W49IvA7T3jEGmqGVtlNIYDpQ3cTTa9XQFP0JHZr-MgvCoRq3EWJ6Twl0LM0UOlNoJD0h1numBolB2ztxRjVJ1Naq_z4w373bHe-2f0gVBtMQg3r4jNeLaCSOIgQQ36iUBLa1Hr-dIdBqzpp3-2sm2NAer4-qTyVGKEBnwZ5wyzLg/s806/IMG_8276.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="605" data-original-width="806" height="294" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhBHSzj24W49IvA7T3jEGmqGVtlNIYDpQ3cTTa9XQFP0JHZr-MgvCoRq3EWJ6Twl0LM0UOlNoJD0h1numBolB2ztxRjVJ1Naq_z4w373bHe-2f0gVBtMQg3r4jNeLaCSOIgQQ36iUBLa1Hr-dIdBqzpp3-2sm2NAer4-qTyVGKEBnwZ5wyzLg/w392-h294/IMG_8276.JPG" width="392" />&nbsp;</a></div><div class="separator" style="clear: both; text-align: left;">&nbsp;</div><p>Oh well, I guess I just have to live with them! 😁</p><p>Zz.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-75271899927028380772023年03月09日T13:29:00.005-06:002023年03月09日T13:29:50.659-06:00Room-Temperature Superconductor?<p>Here we go again!</p><p>Big news with the new publication out of Nature this week. A report on an observation of <a href="https://physicsworld.com/a/evidence-for-near-ambient-superconductivity-found-in-lutetium-hydride/" target="_blank">room-temperature superconductivity</a> on a sample that is under pressure at only 1 GPa. That pressure is exceedingly low considering that most of the other superconductors that that has a high transition temperatures tend to be under hundreds of GPa.</p><p></p><blockquote>Superconductivity has been observed at 20 °C (294 K) in a nitrogen-doped lutetium hydride under a pressure of 1 GPa (10 kbar). The material was made and studied by Ranga Dias and colleagues at the University of Rochester in the US, who claim that the finding raises hopes that a material that superconducts at ambient conditions may soon be found.</blockquote><p></p><p>Not only that, this thing changes color as pressure is increased, with it turning from blue to pink at the onset of superconductivity. I'm sure doing a reflectivity measurement such as UV-VIS to look at the phonon modes would be very interesting here.&nbsp;</p><p>But as with anything here, this needs to be independently verified, meaning that another group must be able to replicate the recipe and observe the same thing, before this is widely accepted. We will just have to wait.</p><p>Z.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0tag:blogger.com,1999:blog-34480619.post-30260571551266550612023年02月17日T09:43:00.004-06:002023年02月17日T09:43:52.724-06:00Blackholes The Source Of Dark Energy?<p>Can blackholes at the center of galaxies be the source of the dark energy that we have been detecting?</p><p>That seems to be the conclusion based on two recently published papers [1,2]. Both of these are open access papers, so the full papers are available to everyone.</p><p>You may read an explanation and review of the papers at the <a href="https://aasnova.org/2023/02/15/black-holes-as-the-source-of-dark-energy/#:~:text=Certain%20physical%20quantities%20must%20be%20conserved%20as%20black,sought-after%20component%20of%20our%20models%20of%20the%20cosmos." target="_blank">AAS news website</a>. The implication here is that if this is true, then dark energy is not something exotic or new since it can already be explained with General Relativity.<br /></p><p>Now, if only we can find those pesky dark matter.... if they exist.</p><p>Zz.<br /></p><p>[1] <a href="https://iopscience.iop.org/article/10.3847/2041-8213/acb704">D. Farrah et al., Astrophy. J. Lett., v.944, p.L31 (2023)</a>.</p><p>[2] <a href="https://iopscience.iop.org/article/10.3847/1538-4357/acac2e">D. Farrah et al., Astrophy. J., v.943, p.133 (2023)</a>.<br /></p>ZapperZhttp://www.blogger.com/profile/15861398273820851809noreply@blogger.com0

AltStyle によって変換されたページ (->オリジナル) /