NAME | LIBRARY | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | VERSIONS | STANDARDS | HISTORY | NOTES | BUGS | EXAMPLES | SEE ALSO | COLOPHON
clone(2) System Calls Manual clone(2)
clone, __clone2, clone3 - create a child process
Standard C library (libc, -lc)
/* Prototype for the glibc wrapper function */ #define _GNU_SOURCE #include <sched.h> int clone(typeof(int (void *_Nullable)) *fn, void *stack, int flags, void *_Nullable arg, ... /* pid_t *_Nullable parent_tid, void *_Nullable tls, pid_t *_Nullable child_tid */ ); /* For the prototype of the raw clone() system call, see VERSIONS. */ #include <linux/sched.h> /* Definition of struct clone_args */ #include <sched.h> /* Definition of CLONE_* constants */ #include <sys/syscall.h> /* Definition of SYS_* constants */ #include <unistd.h> long syscall(SYS_clone3, struct clone_args *cl_args, size_t size); Note: glibc provides no wrapper for clone3(), necessitating the use of syscall(2).
These system calls create a new ("child") process, in a manner
similar to fork(2).
By contrast with fork(2), these system calls provide more precise
control over what pieces of execution context are shared between
the calling process and the child process. For example, using
these system calls, the caller can control whether or not the two
processes share the virtual address space, the table of file
descriptors, and the table of signal handlers. These system calls
also allow the new child process to be placed in separate
namespaces(7).
Note that in this manual page, "calling process" normally
corresponds to "parent process". But see the descriptions of
CLONE_PARENT and CLONE_THREAD below.
This page describes the following interfaces:
• The glibc clone() wrapper function and the underlying system
call on which it is based. The main text describes the wrapper
function; the differences for the raw system call are described
toward the end of this page.
• The newer clone3() system call.
In the remainder of this page, the terminology "the clone call" is
used when noting details that apply to all of these interfaces.
The clone() wrapper function
When the child process is created with the clone() wrapper
function, it commences execution by calling the function pointed
to by the argument fn. (This differs from fork(2), where
execution continues in the child from the point of the fork(2)
call.) The arg argument is passed as the argument of the function
fn.
When the fn(arg) function returns, the child process terminates.
The integer returned by fn is the exit status for the child
process. The child process may also terminate explicitly by
calling exit(2) or after receiving a fatal signal.
The stack argument specifies the location of the stack used by the
child process. Since the child and calling process may share
memory, it is not possible for the child process to execute in the
same stack as the calling process. The calling process must
therefore set up memory space for the child stack and pass a
pointer to this space to clone(). Stacks grow downward on all
processors that run Linux (except the HP PA processors), so stack
usually points to the topmost address of the memory space set up
for the child stack. Note that clone() does not provide a means
whereby the caller can inform the kernel of the size of the stack
area.
The remaining arguments to clone() are discussed below.
clone3()
The clone3() system call provides a superset of the functionality
of the older clone() interface. It also provides a number of API
improvements, including: space for additional flags bits; cleaner
separation in the use of various arguments; and the ability to
specify the size of the child's stack area.
As with fork(2), clone3() returns in both the parent and the
child. It returns 0 in the child process and returns the PID of
the child in the parent.
The cl_args argument of clone3() is a structure of the following
form:
struct clone_args {
u64 flags; /* Flags bit mask */
u64 pidfd; /* Where to store PID file descriptor
(int *) */
u64 child_tid; /* Where to store child TID,
in child's memory (pid_t *) */
u64 parent_tid; /* Where to store child TID,
in parent's memory (pid_t *) */
u64 exit_signal; /* Signal to deliver to parent on
child termination */
u64 stack; /* Pointer to lowest byte of stack */
u64 stack_size; /* Size of stack */
u64 tls; /* Location of new TLS */
u64 set_tid; /* Pointer to a pid_t array
(since Linux 5.5) */
u64 set_tid_size; /* Number of elements in set_tid
(since Linux 5.5) */
u64 cgroup; /* File descriptor for target cgroup
of child (since Linux 5.7) */
};
The size argument that is supplied to clone3() should be
initialized to the size of this structure. (The existence of the
size argument permits future extensions to the clone_args
structure.)
The stack for the child process is specified via cl_args.stack,
which points to the lowest byte of the stack area, and
cl_args.stack_size, which specifies the size of the stack in
bytes. In the case where the CLONE_VM flag (see below) is
specified, a stack must be explicitly allocated and specified.
Otherwise, these two fields can be specified as NULL and 0, which
causes the child to use the same stack area as the parent (in the
child's own virtual address space).
The remaining fields in the cl_args argument are discussed below.
Equivalence between clone() and clone3() arguments
Unlike the older clone() interface, where arguments are passed
individually, in the newer clone3() interface the arguments are
packaged into the clone_args structure shown above. This
structure allows for a superset of the information passed via the
clone() arguments.
The following table shows the equivalence between the arguments of
clone() and the fields in the clone_args argument supplied to
clone3():
clone() clone3() Notes
cl_args field
flags & ~0xff flags For most flags; details
below
parent_tid pidfd See CLONE_PIDFD
child_tid child_tid See CLONE_CHILD_SETTID
parent_tid parent_tid See CLONE_PARENT_SETTID
flags & 0xff exit_signal
stack stack
--- stack_size
tls tls See CLONE_SETTLS
--- set_tid See below for details
--- set_tid_size
--- cgroup See CLONE_INTO_CGROUP
The child termination signal
When the child process terminates, a signal may be sent to the
parent. The termination signal is specified in the low byte of
flags (clone()) or in cl_args.exit_signal (clone3()). If this
signal is specified as anything other than SIGCHLD, then the
parent process must specify the __WALL or __WCLONE options when
waiting for the child with wait(2). If no signal (i.e., zero) is
specified, then the parent process is not signaled when the child
terminates.
The set_tid array
By default, the kernel chooses the next sequential PID for the new
process in each of the PID namespaces where it is present. When
creating a process with clone3(), the set_tid array (available
since Linux 5.5) can be used to select specific PIDs for the
process in some or all of the PID namespaces where it is present.
If the PID of the newly created process should be set only for the
current PID namespace or in the newly created PID namespace (if
flags contains CLONE_NEWPID) then the first element in the set_tid
array has to be the desired PID and set_tid_size needs to be 1.
If the PID of the newly created process should have a certain
value in multiple PID namespaces, then the set_tid array can have
multiple entries. The first entry defines the PID in the most
deeply nested PID namespace and each of the following entries
contains the PID in the corresponding ancestor PID namespace. The
number of PID namespaces in which a PID should be set is defined
by set_tid_size which cannot be larger than the number of
currently nested PID namespaces.
To create a process with the following PIDs in a PID namespace
hierarchy:
PID NS level Requested PID Notes
0 31496 Outermost PID namespace
1 42
2 7 Innermost PID namespace
Set the array to:
set_tid[0] = 7;
set_tid[1] = 42;
set_tid[2] = 31496;
set_tid_size = 3;
If only the PIDs in the two innermost PID namespaces need to be
specified, set the array to:
set_tid[0] = 7;
set_tid[1] = 42;
set_tid_size = 2;
The PID in the PID namespaces outside the two innermost PID
namespaces is selected the same way as any other PID is selected.
The set_tid feature requires CAP_SYS_ADMIN or (since Linux 5.9)
CAP_CHECKPOINT_RESTORE in all owning user namespaces of the target
PID namespaces.
Callers may only choose a PID greater than 1 in a given PID
namespace if an init process (i.e., a process with PID 1) already
exists in that namespace. Otherwise the PID entry for this PID
namespace must be 1.
The flags mask
Both clone() and clone3() allow a flags bit mask that modifies
their behavior and allows the caller to specify what is shared
between the calling process and the child process. This bit mask—
the flags argument of clone() or the cl_args.flags field passed to
clone3()—is referred to as the flags mask in the remainder of this
page.
The flags mask is specified as a bitwise OR of zero or more of the
constants listed below. Except as noted below, these flags are
available (and have the same effect) in both clone() and clone3().
CLONE_CHILD_CLEARTID (since Linux 2.5.49)
Clear (zero) the child thread ID at the location pointed to
by child_tid (clone()) or cl_args.child_tid (clone3()) in
child memory when the child exits, and do a wakeup on the
futex at that address. The address involved may be changed
by the set_tid_address(2) system call. This is used by
threading libraries.
CLONE_CHILD_SETTID (since Linux 2.5.49)
Store the child thread ID at the location pointed to by
child_tid (clone()) or cl_args.child_tid (clone3()) in the
child's memory. The store operation completes before the
clone call returns control to user space in the child
process. (Note that the store operation may not have
completed before the clone call returns in the parent
process, which is relevant if the CLONE_VM flag is also
employed.)
CLONE_CLEAR_SIGHAND (since Linux 5.5)
By default, signal dispositions in the child thread are the
same as in the parent. If this flag is specified, then all
signals that are handled in the parent (and not set to
SIG_IGN) are reset to their default dispositions (SIG_DFL)
in the child.
Specifying this flag together with CLONE_SIGHAND is
nonsensical and disallowed.
CLONE_DETACHED (historical)
For a while (during the Linux 2.5 development series) there
was a CLONE_DETACHED flag, which caused the parent not to
receive a signal when the child terminated. Ultimately,
the effect of this flag was subsumed under the CLONE_THREAD
flag and by the time Linux 2.6.0 was released, this flag
had no effect. Since Linux 2.6.2, the need to give this
flag together with CLONE_THREAD disappeared.
This flag is still defined, but it is usually ignored when
calling clone(). However, see the description of
CLONE_PIDFD for some exceptions.
CLONE_FILES (since Linux 2.0)
If CLONE_FILES is set, the calling process and the child
process share the same file descriptor table. Any file
descriptor created by the calling process or by the child
process is also valid in the other process. Similarly, if
one of the processes closes a file descriptor, or changes
its associated flags (using the fcntl(2) F_SETFD
operation), the other process is also affected. If a
process sharing a file descriptor table calls execve(2),
its file descriptor table is duplicated (unshared).
If CLONE_FILES is not set, the child process inherits a
copy of all file descriptors opened in the calling process
at the time of the clone call. Subsequent operations that
open or close file descriptors, or change file descriptor
flags, performed by either the calling process or the child
process do not affect the other process. Note, however,
that the duplicated file descriptors in the child refer to
the same open file descriptions as the corresponding file
descriptors in the calling process, and thus share file
offsets and file status flags (see open(2)).
CLONE_FS (since Linux 2.0)
If CLONE_FS is set, the caller and the child process share
the same filesystem information. This includes the root of
the filesystem, the current working directory, and the
umask. Any call to chroot(2), chdir(2), or umask(2)
performed by the calling process or the child process also
affects the other process.
If CLONE_FS is not set, the child process works on a copy
of the filesystem information of the calling process at the
time of the clone call. Calls to chroot(2), chdir(2), or
umask(2) performed later by one of the processes do not
affect the other process.
CLONE_INTO_CGROUP (since Linux 5.7)
By default, a child process is placed in the same version 2
cgroup as its parent. The CLONE_INTO_CGROUP flag allows
the child process to be created in a different version 2
cgroup. (Note that CLONE_INTO_CGROUP has effect only for
version 2 cgroups.)
In order to place the child process in a different cgroup,
the caller specifies CLONE_INTO_CGROUP in cl_args.flags and
passes a file descriptor that refers to a version 2 cgroup
in the cl_args.cgroup field. (This file descriptor can be
obtained by opening a cgroup v2 directory using either the
O_RDONLY or the O_PATH flag.) Note that all of the usual
restrictions (described in cgroups(7)) on placing a process
into a version 2 cgroup apply.
Among the possible use cases for CLONE_INTO_CGROUP are the
following:
• Spawning a process into a cgroup different from the
parent's cgroup makes it possible for a service manager
to directly spawn new services into dedicated cgroups.
This eliminates the accounting jitter that would be
caused if the child process was first created in the
same cgroup as the parent and then moved into the target
cgroup. Furthermore, spawning the child process
directly into a target cgroup is significantly cheaper
than moving the child process into the target cgroup
after it has been created.
• The CLONE_INTO_CGROUP flag also allows the creation of
frozen child processes by spawning them into a frozen
cgroup. (See cgroups(7) for a description of the
freezer controller.)
• For threaded applications (or even thread
implementations which make use of cgroups to limit
individual threads), it is possible to establish a fixed
cgroup layout before spawning each thread directly into
its target cgroup.
CLONE_IO (since Linux 2.6.25)
If CLONE_IO is set, then the new process shares an I/O
context with the calling process. If this flag is not set,
then (as with fork(2)) the new process has its own I/O
context.
The I/O context is the I/O scope of the disk scheduler
(i.e., what the I/O scheduler uses to model scheduling of a
process's I/O). If processes share the same I/O context,
they are treated as one by the I/O scheduler. As a
consequence, they get to share disk time. For some I/O
schedulers, if two processes share an I/O context, they
will be allowed to interleave their disk access. If
several threads are doing I/O on behalf of the same process
(aio_read(3), for instance), they should employ CLONE_IO to
get better I/O performance.
If the kernel is not configured with the CONFIG_BLOCK
option, this flag is a no-op.
CLONE_NEWCGROUP (since Linux 4.6)
Create the process in a new cgroup namespace. If this flag
is not set, then (as with fork(2)) the process is created
in the same cgroup namespaces as the calling process.
For further information on cgroup namespaces, see
cgroup_namespaces(7).
Only a privileged process (CAP_SYS_ADMIN) can employ
CLONE_NEWCGROUP.
CLONE_NEWIPC (since Linux 2.6.19)
If CLONE_NEWIPC is set, then create the process in a new
IPC namespace. If this flag is not set, then (as with
fork(2)), the process is created in the same IPC namespace
as the calling process.
For further information on IPC namespaces, see
ipc_namespaces(7).
Only a privileged process (CAP_SYS_ADMIN) can employ
CLONE_NEWIPC. This flag can't be specified in conjunction
with CLONE_SYSVSEM.
CLONE_NEWNET (since Linux 2.6.24)
(The implementation of this flag was completed only by
about Linux 2.6.29.)
If CLONE_NEWNET is set, then create the process in a new
network namespace. If this flag is not set, then (as with
fork(2)) the process is created in the same network
namespace as the calling process.
For further information on network namespaces, see
network_namespaces(7).
Only a privileged process (CAP_SYS_ADMIN) can employ
CLONE_NEWNET.
CLONE_NEWNS (since Linux 2.4.19)
If CLONE_NEWNS is set, the cloned child is started in a new
mount namespace, initialized with a copy of the namespace
of the parent. If CLONE_NEWNS is not set, the child lives
in the same mount namespace as the parent.
For further information on mount namespaces, see
namespaces(7) and mount_namespaces(7).
Only a privileged process (CAP_SYS_ADMIN) can employ
CLONE_NEWNS. It is not permitted to specify both
CLONE_NEWNS and CLONE_FS in the same clone call.
CLONE_NEWPID (since Linux 2.6.24)
If CLONE_NEWPID is set, then create the process in a new
PID namespace. If this flag is not set, then (as with
fork(2)) the process is created in the same PID namespace
as the calling process.
For further information on PID namespaces, see
namespaces(7) and pid_namespaces(7).
Only a privileged process (CAP_SYS_ADMIN) can employ
CLONE_NEWPID. This flag can't be specified in conjunction
with CLONE_THREAD.
CLONE_NEWUSER
(This flag first became meaningful for clone() in Linux
2.6.23, the current clone() semantics were merged in Linux
3.5, and the final pieces to make the user namespaces
completely usable were merged in Linux 3.8.)
If CLONE_NEWUSER is set, then create the process in a new
user namespace. If this flag is not set, then (as with
fork(2)) the process is created in the same user namespace
as the calling process.
For further information on user namespaces, see
namespaces(7) and user_namespaces(7).
Before Linux 3.8, use of CLONE_NEWUSER required that the
caller have three capabilities: CAP_SYS_ADMIN, CAP_SETUID,
and CAP_SETGID. Starting with Linux 3.8, no privileges are
needed to create a user namespace.
This flag can't be specified in conjunction with
CLONE_THREAD or CLONE_PARENT. For security reasons,
CLONE_NEWUSER cannot be specified in conjunction with
CLONE_FS.
CLONE_NEWUTS (since Linux 2.6.19)
If CLONE_NEWUTS is set, then create the process in a new
UTS namespace, whose identifiers are initialized by
duplicating the identifiers from the UTS namespace of the
calling process. If this flag is not set, then (as with
fork(2)) the process is created in the same UTS namespace
as the calling process.
For further information on UTS namespaces, see
uts_namespaces(7).
Only a privileged process (CAP_SYS_ADMIN) can employ
CLONE_NEWUTS.
CLONE_PARENT (since Linux 2.3.12)
If CLONE_PARENT is set, then the parent of the new child
(as returned by getppid(2)) will be the same as that of the
calling process.
If CLONE_PARENT is not set, then (as with fork(2)) the
child's parent is the calling process.
Note that it is the parent process, as returned by
getppid(2), which is signaled when the child terminates, so
that if CLONE_PARENT is set, then the parent of the calling
process, rather than the calling process itself, is
signaled.
The CLONE_PARENT flag can't be used in clone calls by the
global init process (PID 1 in the initial PID namespace)
and init processes in other PID namespaces. This
restriction prevents the creation of multi-rooted process
trees as well as the creation of unreapable zombies in the
initial PID namespace.
CLONE_PARENT_SETTID (since Linux 2.5.49)
Store the child thread ID at the location pointed to by
parent_tid (clone()) or cl_args.parent_tid (clone3()) in
the parent's memory. (In Linux 2.5.32-2.5.48 there was a
flag CLONE_SETTID that did this.) The store operation
completes before the clone call returns control to user
space.
CLONE_PID (Linux 2.0 to Linux 2.5.15)
If CLONE_PID is set, the child process is created with the
same process ID as the calling process. This is good for
hacking the system, but otherwise of not much use. From
Linux 2.3.21 onward, this flag could be specified only by
the system boot process (PID 0). The flag disappeared
completely from the kernel sources in Linux 2.5.16.
Subsequently, the kernel silently ignored this bit if it
was specified in the flags mask. Much later, the same bit
was recycled for use as the CLONE_PIDFD flag.
CLONE_PIDFD (since Linux 5.2)
If this flag is specified, a PID file descriptor referring
to the child process is allocated and placed at a specified
location in the parent's memory. The close-on-exec flag is
set on this new file descriptor. PID file descriptors can
be used for the purposes described in pidfd_open(2).
• When using clone3(), the PID file descriptor is placed
at the location pointed to by cl_args.pidfd.
• When using clone(), the PID file descriptor is placed at
the location pointed to by parent_tid. Since the
parent_tid argument is used to return the PID file
descriptor, CLONE_PIDFD cannot be used with
CLONE_PARENT_SETTID when calling clone().
It is currently not possible to use this flag together with
CLONE_THREAD. This means that the process identified by
the PID file descriptor will always be a thread group
leader.
If the obsolete CLONE_DETACHED flag is specified alongside
CLONE_PIDFD when calling clone(), an error is returned. An
error also results if CLONE_DETACHED is specified when
calling clone3(). This error behavior ensures that the bit
corresponding to CLONE_DETACHED can be reused for further
PID file descriptor features in the future.
CLONE_PTRACE (since Linux 2.2)
If CLONE_PTRACE is specified, and the calling process is
being traced, then trace the child also (see ptrace(2)).
CLONE_SETTLS (since Linux 2.5.32)
The TLS (Thread Local Storage) descriptor is set to tls.
The interpretation of tls and the resulting effect is
architecture dependent. On x86, tls is interpreted as a
struct user_desc * (see set_thread_area(2)). On x86-64 it
is the new value to be set for the %fs base register (see
the ARCH_SET_FS argument to arch_prctl(2)). On
architectures with a dedicated TLS register, it is the new
value of that register.
Use of this flag requires detailed knowledge and generally
it should not be used except in libraries implementing
threading.
CLONE_SIGHAND (since Linux 2.0)
If CLONE_SIGHAND is set, the calling process and the child
process share the same table of signal handlers. If the
calling process or child process calls sigaction(2) to
change the behavior associated with a signal, the behavior
is changed in the other process as well. However, the
calling process and child processes still have distinct
signal masks and sets of pending signals. So, one of them
may block or unblock signals using sigprocmask(2) without
affecting the other process.
If CLONE_SIGHAND is not set, the child process inherits a
copy of the signal handlers of the calling process at the
time of the clone call. Calls to sigaction(2) performed
later by one of the processes have no effect on the other
process.
Since Linux 2.6.0, the flags mask must also include
CLONE_VM if CLONE_SIGHAND is specified.
CLONE_STOPPED (since Linux 2.6.0)
If CLONE_STOPPED is set, then the child is initially
stopped (as though it was sent a SIGSTOP signal), and must
be resumed by sending it a SIGCONT signal.
This flag was deprecated from Linux 2.6.25 onward, and was
removed altogether in Linux 2.6.38. Since then, the kernel
silently ignores it without error. Starting with Linux
4.6, the same bit was reused for the CLONE_NEWCGROUP flag.
CLONE_SYSVSEM (since Linux 2.5.10)
If CLONE_SYSVSEM is set, then the child and the calling
process share a single list of System V semaphore
adjustment (semadj) values (see semop(2)). In this case,
the shared list accumulates semadj values across all
processes sharing the list, and semaphore adjustments are
performed only when the last process that is sharing the
list terminates (or ceases sharing the list using
unshare(2)). If this flag is not set, then the child has a
separate semadj list that is initially empty.
CLONE_THREAD (since Linux 2.4.0)
If CLONE_THREAD is set, the child is placed in the same
thread group as the calling process. To make the remainder
of the discussion of CLONE_THREAD more readable, the term
"thread" is used to refer to the processes within a thread
group.
Thread groups were a feature added in Linux 2.4 to support
the POSIX threads notion of a set of threads that share a
single PID. Internally, this shared PID is the so-called
thread group identifier (TGID) for the thread group. Since
Linux 2.4, calls to getpid(2) return the TGID of the
caller.
The threads within a group can be distinguished by their
(system-wide) unique thread IDs (TID). A new thread's TID
is available as the function result returned to the caller,
and a thread can obtain its own TID using gettid(2).
When a clone call is made without specifying CLONE_THREAD,
then the resulting thread is placed in a new thread group
whose TGID is the same as the thread's TID. This thread is
the leader of the new thread group.
A new thread created with CLONE_THREAD has the same parent
process as the process that made the clone call (i.e., like
CLONE_PARENT), so that calls to getppid(2) return the same
value for all of the threads in a thread group. When a
CLONE_THREAD thread terminates, the thread that created it
is not sent a SIGCHLD (or other termination) signal; nor
can the status of such a thread be obtained using wait(2).
(The thread is said to be detached.)
After all of the threads in a thread group terminate the
parent process of the thread group is sent a SIGCHLD (or
other termination) signal.
If any of the threads in a thread group performs an
execve(2), then all threads other than the thread group
leader are terminated, and the new program is executed in
the thread group leader.
If one of the threads in a thread group creates a child
using fork(2), then any thread in the group can wait(2) for
that child.
Since Linux 2.5.35, the flags mask must also include
CLONE_SIGHAND if CLONE_THREAD is specified (and note that,
since Linux 2.6.0, CLONE_SIGHAND also requires CLONE_VM to
be included).
Signal dispositions and actions are process-wide: if an
unhandled signal is delivered to a thread, then it will
affect (terminate, stop, continue, be ignored in) all
members of the thread group.
Each thread has its own signal mask, as set by
sigprocmask(2).
A signal may be process-directed or thread-directed. A
process-directed signal is targeted at a thread group
(i.e., a TGID), and is delivered to an arbitrarily selected
thread from among those that are not blocking the signal.
A signal may be process-directed because it was generated
by the kernel for reasons other than a hardware exception,
or because it was sent using kill(2) or sigqueue(3). A
thread-directed signal is targeted at (i.e., delivered to)
a specific thread. A signal may be thread directed because
it was sent using tgkill(2) or pthread_sigqueue(3), or
because the thread executed a machine language instruction
that triggered a hardware exception (e.g., invalid memory
access triggering SIGSEGV or a floating-point exception
triggering SIGFPE).
A call to sigpending(2) returns a signal set that is the
union of the pending process-directed signals and the
signals that are pending for the calling thread.
If a process-directed signal is delivered to a thread
group, and the thread group has installed a handler for the
signal, then the handler is invoked in exactly one,
arbitrarily selected member of the thread group that has
not blocked the signal. If multiple threads in a group are
waiting to accept the same signal using sigwaitinfo(2), the
kernel will arbitrarily select one of these threads to
receive the signal.
CLONE_UNTRACED (since Linux 2.5.46)
If CLONE_UNTRACED is specified, then a tracing process
cannot force CLONE_PTRACE on this child process.
CLONE_VFORK (since Linux 2.2)
If CLONE_VFORK is set, the execution of the calling process
is suspended until the child releases its virtual memory
resources via a call to execve(2) or _exit(2) (as with
vfork(2)).
If CLONE_VFORK is not set, then both the calling process
and the child are schedulable after the call, and an
application should not rely on execution occurring in any
particular order.
CLONE_VM (since Linux 2.0)
If CLONE_VM is set, the calling process and the child
process run in the same memory space. In particular,
memory writes performed by the calling process or by the
child process are also visible in the other process.
Moreover, any memory mapping or unmapping performed with
mmap(2) or munmap(2) by the child or calling process also
affects the other process.
If CLONE_VM is not set, the child process runs in a
separate copy of the memory space of the calling process at
the time of the clone call. Memory writes or file
mappings/unmappings performed by one of the processes do
not affect the other, as with fork(2).
If the CLONE_VM flag is specified and the CLONE_VFORK flag
is not specified, then any alternate signal stack that was
established by sigaltstack(2) is cleared in the child
process.
On success, the thread ID of the child process is returned in the caller's thread of execution. On failure, -1 is returned in the caller's context, no child process is created, and errno is set to indicate the error.
EACCES (clone3() only) CLONE_INTO_CGROUP was specified in cl_args.flags, but the restrictions (described in cgroups(7)) on placing the child process into the version 2 cgroup referred to by cl_args.cgroup are not met. EAGAIN Too many processes are already running; see fork(2). EBUSY (clone3() only) CLONE_INTO_CGROUP was specified in cl_args.flags, but the file descriptor specified in cl_args.cgroup refers to a version 2 cgroup in which a domain controller is enabled. EEXIST (clone3() only) One (or more) of the PIDs specified in set_tid already exists in the corresponding PID namespace. EINVAL Both CLONE_SIGHAND and CLONE_CLEAR_SIGHAND were specified in the flags mask. EINVAL CLONE_SIGHAND was specified in the flags mask, but CLONE_VM was not. (Since Linux 2.6.0.) EINVAL CLONE_THREAD was specified in the flags mask, but CLONE_SIGHAND was not. (Since Linux 2.5.35.) EINVAL CLONE_THREAD was specified in the flags mask, but the current process previously called unshare(2) with the CLONE_NEWPID flag or used setns(2) to reassociate itself with a PID namespace. EINVAL Both CLONE_FS and CLONE_NEWNS were specified in the flags mask. EINVAL (since Linux 3.9) Both CLONE_NEWUSER and CLONE_FS were specified in the flags mask. EINVAL Both CLONE_NEWIPC and CLONE_SYSVSEM were specified in the flags mask. EINVAL CLONE_NEWPID and one (or both) of CLONE_THREAD or CLONE_PARENT were specified in the flags mask. EINVAL CLONE_NEWUSER and CLONE_THREAD were specified in the flags mask. EINVAL (since Linux 2.6.32) CLONE_PARENT was specified, and the caller is an init process. EINVAL Returned by the glibc clone() wrapper function when fn or stack is specified as NULL. EINVAL CLONE_NEWIPC was specified in the flags mask, but the kernel was not configured with the CONFIG_SYSVIPC and CONFIG_IPC_NS options. EINVAL CLONE_NEWNET was specified in the flags mask, but the kernel was not configured with the CONFIG_NET_NS option. EINVAL CLONE_NEWPID was specified in the flags mask, but the kernel was not configured with the CONFIG_PID_NS option. EINVAL CLONE_NEWUSER was specified in the flags mask, but the kernel was not configured with the CONFIG_USER_NS option. EINVAL CLONE_NEWUTS was specified in the flags mask, but the kernel was not configured with the CONFIG_UTS_NS option. EINVAL stack is not aligned to a suitable boundary for this architecture. For example, on aarch64, stack must be a multiple of 16. EINVAL (clone3() only) CLONE_DETACHED was specified in the flags mask. EINVAL (clone() only) CLONE_PIDFD was specified together with CLONE_DETACHED in the flags mask. EINVAL CLONE_PIDFD was specified together with CLONE_THREAD in the flags mask. EINVAL (clone() only) CLONE_PIDFD was specified together with CLONE_PARENT_SETTID in the flags mask. EINVAL (clone3() only) set_tid_size is greater than the number of nested PID namespaces. EINVAL (clone3() only) One of the PIDs specified in set_tid was an invalid. EINVAL (clone3() only) CLONE_THREAD or CLONE_PARENT was specified in the flags mask, but a signal was specified in exit_signal. EINVAL (AArch64 only, Linux 4.6 and earlier) stack was not aligned to a 128-bit boundary. ENOMEM Cannot allocate sufficient memory to allocate a task structure for the child, or to copy those parts of the caller's context that need to be copied. ENOSPC (since Linux 3.7) CLONE_NEWPID was specified in the flags mask, but the limit on the nesting depth of PID namespaces would have been exceeded; see pid_namespaces(7). ENOSPC (since Linux 4.9; beforehand EUSERS) CLONE_NEWUSER was specified in the flags mask, and the call would cause the limit on the number of nested user namespaces to be exceeded. See user_namespaces(7). From Linux 3.11 to Linux 4.8, the error diagnosed in this case was EUSERS. ENOSPC (since Linux 4.9) One of the values in the flags mask specified the creation of a new user namespace, but doing so would have caused the limit defined by the corresponding file in /proc/sys/user to be exceeded. For further details, see namespaces(7). EOPNOTSUPP (clone3() only) CLONE_INTO_CGROUP was specified in cl_args.flags, but the file descriptor specified in cl_args.cgroup refers to a version 2 cgroup that is in the domain invalid state. EPERM CLONE_NEWCGROUP, CLONE_NEWIPC, CLONE_NEWNET, CLONE_NEWNS, CLONE_NEWPID, or CLONE_NEWUTS was specified by an unprivileged process (process without CAP_SYS_ADMIN). EPERM CLONE_PID was specified by a process other than process 0. (This error occurs only on Linux 2.5.15 and earlier.) EPERM CLONE_NEWUSER was specified in the flags mask, but either the effective user ID or the effective group ID of the caller does not have a mapping in the parent namespace (see user_namespaces(7)). EPERM (since Linux 3.9) CLONE_NEWUSER was specified in the flags mask and the caller is in a chroot environment (i.e., the caller's root directory does not match the root directory of the mount namespace in which it resides). EPERM (clone3() only) set_tid_size was greater than zero, and the caller lacks the CAP_SYS_ADMIN capability in one or more of the user namespaces that own the corresponding PID namespaces. ERESTARTNOINTR (since Linux 2.6.17) System call was interrupted by a signal and will be restarted. (This can be seen only during a trace.) EUSERS (Linux 3.11 to Linux 4.8) CLONE_NEWUSER was specified in the flags mask, and the limit on the number of nested user namespaces would be exceeded. See the discussion of the ENOSPC error above.
The glibc clone() wrapper function makes some changes in the memory pointed to by stack (changes required to set the stack up correctly for the child) before invoking the clone() system call. So, in cases where clone() is used to recursively create children, do not use the buffer employed for the parent's stack as the stack of the child. On i386, clone() should not be called through vsyscall, but directly through int 0ドルx80. C library/kernel differences The raw clone() system call corresponds more closely to fork(2) in that execution in the child continues from the point of the call. As such, the fn and arg arguments of the clone() wrapper function are omitted. In contrast to the glibc wrapper, the raw clone() system call accepts NULL as a stack argument (and clone3() likewise allows cl_args.stack to be NULL). In this case, the child uses a duplicate of the parent's stack. (Copy-on-write semantics ensure that the child gets separate copies of stack pages when either process modifies the stack.) In this case, for correct operation, the CLONE_VM option should not be specified. (If the child shares the parent's memory because of the use of the CLONE_VM flag, then no copy-on-write duplication occurs and chaos is likely to result.) The order of the arguments also differs in the raw system call, and there are variations in the arguments across architectures, as detailed in the following paragraphs. The raw system call interface on x86-64 and some other architectures (including sh, tile, and alpha) is: long clone(unsigned long flags, void *stack, int *parent_tid, int *child_tid, unsigned long tls); On x86-32, and several other common architectures (including score, ARM, ARM 64, PA-RISC, arc, Power PC, xtensa, and MIPS), the order of the last two arguments is reversed: long clone(unsigned long flags, void *stack, int *parent_tid, unsigned long tls, int *child_tid); On the cris and s390 architectures, the order of the first two arguments is reversed: long clone(void *stack, unsigned long flags, int *parent_tid, int *child_tid, unsigned long tls); On the microblaze architecture, an additional argument is supplied: long clone(unsigned long flags, void *stack, int stack_size, /* Size of stack */ int *parent_tid, int *child_tid, unsigned long tls); blackfin, m68k, and sparc The argument-passing conventions on blackfin, m68k, and sparc are different from the descriptions above. For details, see the kernel (and glibc) source.
Linux.
clone3() Linux 5.3. Linux 2.4 and earlier In the Linux 2.4.x series, CLONE_THREAD generally does not make the parent of the new thread the same as the parent of the calling process. However, from Linux 2.4.7 to Linux 2.4.18 the CLONE_THREAD flag implied the CLONE_PARENT flag (as in Linux 2.6.0 and later). In Linux 2.4 and earlier, clone() does not take arguments parent_tid, tls, and child_tid. ia64 On ia64, a different interface is used: int __clone2(typeof(int (void *)) *fn, void *stack_base, size_t stack_size, int flags, void *arg, ... /* pid_t *parent_tid, struct user_desc *tls, pid_t *child_tid */ ); The prototype shown above is for the glibc wrapper function; for the system call itself, the prototype can be described as follows (it is identical to the clone() prototype on microblaze): long clone2(unsigned long flags, void *stack_base, int stack_size, /* Size of stack */ int *parent_tid, int *child_tid, unsigned long tls); __clone2() operates in the same way as clone(), except that stack_base points to the lowest address of the child's stack area, and stack_size specifies the size of the stack pointed to by stack_base.
One use of these system calls is to implement threads: multiple flows of control in a program that run concurrently in a shared address space. The kcmp(2) system call can be used to test whether two processes share various resources such as a file descriptor table, System V semaphore undo operations, or a virtual address space. Handlers registered using pthread_atfork(3) are not executed during a clone call.
GNU C library versions 2.3.4 up to and including 2.24 contained a wrapper function for getpid(2) that performed caching of PIDs. This caching relied on support in the glibc wrapper for clone(), but limitations in the implementation meant that the cache was not up to date in some circumstances. In particular, if a signal was delivered to the child immediately after the clone() call, then a call to getpid(2) in a handler for the signal could return the PID of the calling process ("the parent"), if the clone wrapper had not yet had a chance to update the PID cache in the child. (This discussion ignores the case where the child was created using CLONE_THREAD, when getpid(2) should return the same value in the child and in the process that called clone(), since the caller and the child are in the same thread group. The stale-cache problem also does not occur if the flags argument includes CLONE_VM.) To get the truth, it was sometimes necessary to use code such as the following: #include <syscall.h> pid_t mypid; mypid = syscall(SYS_getpid); Because of the stale-cache problem, as well as other problems noted in getpid(2), the PID caching feature was removed in glibc 2.25.
The following program demonstrates the use of clone() to create a child process that executes in a separate UTS namespace. The child changes the hostname in its UTS namespace. Both parent and child then display the system hostname, making it possible to see that the hostname differs in the UTS namespaces of the parent and child. For an example of the use of this program, see setns(2). Within the sample program, we allocate the memory that is to be used for the child's stack using mmap(2) rather than malloc(3) for the following reasons: • mmap(2) allocates a block of memory that starts on a page boundary and is a multiple of the page size. This is useful if we want to establish a guard page (a page with protection PROT_NONE) at the end of the stack using mprotect(2). • We can specify the MAP_STACK flag to request a mapping that is suitable for a stack. For the moment, this flag is a no-op on Linux, but it exists and has effect on some other systems, so we should include it for portability. Program source #define _GNU_SOURCE #include <err.h> #include <sched.h> #include <signal.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/mman.h> #include <sys/types.h> #include <sys/utsname.h> #include <sys/wait.h> #include <unistd.h> static int /* Start function for cloned child */ childFunc(void *arg) { struct utsname uts; /* Change hostname in UTS namespace of child. */ if (sethostname(arg, strlen(arg)) == -1) err(EXIT_FAILURE, "sethostname"); /* Retrieve and display hostname. */ if (uname(&uts) == -1) err(EXIT_FAILURE, "uname"); printf("uts.nodename in child: %s\n", uts.nodename); /* Keep the namespace open for a while, by sleeping. This allows some experimentation--for example, another process might join the namespace. */ sleep(200); return 0; /* Child terminates now */ } #define STACK_SIZE (1024 * 1024) /* Stack size for cloned child */ int main(int argc, char *argv[]) { char *stack; /* Start of stack buffer */ char *stackTop; /* End of stack buffer */ pid_t pid; struct utsname uts; if (argc < 2) { fprintf(stderr, "Usage: %s <child-hostname>\n", argv[0]); exit(EXIT_SUCCESS); } /* Allocate memory to be used for the stack of the child. */ stack = mmap(NULL, STACK_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_STACK, -1, 0); if (stack == MAP_FAILED) err(EXIT_FAILURE, "mmap"); stackTop = stack + STACK_SIZE; /* Assume stack grows downward */ /* Create child that has its own UTS namespace; child commences execution in childFunc(). */ pid = clone(childFunc, stackTop, CLONE_NEWUTS | SIGCHLD, argv[1]); if (pid == -1) err(EXIT_FAILURE, "clone"); if (munmap(stack, STACK_SIZE)) err(EXIT_FAILURE, "munmap"); printf("clone() returned %jd\n", (intmax_t) pid); /* Parent falls through to here */ sleep(1); /* Give child time to change its hostname */ /* Display hostname in parent's UTS namespace. This will be different from hostname in child's UTS namespace. */ if (uname(&uts) == -1) err(EXIT_FAILURE, "uname"); printf("uts.nodename in parent: %s\n", uts.nodename); if (waitpid(pid, NULL, 0) == -1) /* Wait for child */ err(EXIT_FAILURE, "waitpid"); printf("child has terminated\n"); exit(EXIT_SUCCESS); }
fork(2), futex(2), getpid(2), gettid(2), kcmp(2), mmap(2), pidfd_open(2), set_thread_area(2), set_tid_address(2), setns(2), tkill(2), unshare(2), wait(2), capabilities(7), namespaces(7), pthreads(7)
This page is part of the man-pages (Linux kernel and C library user-space interface documentation) project. Information about the project can be found at ⟨https://www.kernel.org/doc/man-pages/⟩. If you have a bug report for this manual page, see ⟨https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/tree/CONTRIBUTING⟩. This page was obtained from the tarball man-pages-6.15.tar.gz fetched from ⟨https://mirrors.edge.kernel.org/pub/linux/docs/man-pages/⟩ on 2025年08月11日. If you discover any rendering problems in this HTML version of the page, or you believe there is a better or more up- to-date source for the page, or you have corrections or improvements to the information in this COLOPHON (which is not part of the original manual page), send a mail to man-pages@man7.org Linux man-pages 6.15 2025年07月19日 clone(2)
Pages that refer to this page: kill(1), nsenter(1), strace(1), unshare(1), arch_prctl(2), capget(2), execve(2), fcntl_locking(2), F_GETSIG(2const), fork(2), getpid(2), get_robust_list(2), gettid(2), ioprio_set(2), kcmp(2), mount(2), mount_setattr(2), NS_GET_NSTYPE(2const), openat2(2), pidfd_getfd(2), pidfd_open(2), pidfd_send_signal(2), pivot_root(2), PR_GET_TID_ADDRESS(2const), PR_SET_CHILD_SUBREAPER(2const), PR_SET_NO_NEW_PRIVS(2const), PR_SET_SYSCALL_USER_DISPATCH(2const), PR_SET_TAGGED_ADDR_CTRL(2const), PR_SVE_SET_VL(2const), ptrace(2), sched_setaffinity(2), seccomp(2), semop(2), set_mempolicy(2), setns(2), set_tid_address(2), sigaltstack(2), syscalls(2), timer_create(2), tkill(2), unshare(2), userfaultfd(2), vfork(2), wait(2), lttng-ust(3), posix_spawn(3), veth(4), core(5), proc_pid_comm(5), systemd.exec(5), capabilities(7), cgroup_namespaces(7), cgroups(7), futex(7), ipc_namespaces(7), landlock(7), mount_namespaces(7), namespaces(7), network_namespaces(7), path_resolution(7), persistent-keyring(7), pid_namespaces(7), pkeys(7), process-keyring(7), pthreads(7), session-keyring(7), signal(7), thread-keyring(7), user-keyring(7), user_namespaces(7), user-session-keyring(7), uts_namespaces(7), lsns(8)
HTML rendering created 2025年09月06日 by Michael Kerrisk, author of The Linux Programming Interface.
For details of in-depth Linux/UNIX system programming training courses that I teach, look here.
Hosting by jambit GmbH.
Cover of TLPI