[LOGic] Logic 9

Wed Feb 12 20:41:27 EST 2014

G'Day,
Keep in mind LOGic 9 allows one to use VE3NEA's OmniRig. And/or TRX-Manager.
OmniRig is free and available at www.dxatlas.com
TRX-Manager is available from www.trx-manager.com Unfortunately it is not free - but it is not inexpensive. It is years since I paid for an upgrade.
Both work flawlessly for me in LOGic 9, TRX-Manager since LOGic version 5 or 6.
Peter VK4IU
-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net] On Behalf Of Ron N0AT
Sent: Thursday, 13 February 2014 11:27 AM
To: logic at mailman.qth.net
Subject: Re: [LOGic] Logic 9
I deleted all of the .CDX files. I think there were 14 of them. The .CDX files are index files and get rebuilt the next time you run LOGic9.
I was using the Legacy rig driver for a while, then things settled down and I was able to use the new rig drivers.
73 de Ron NØAT
-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net] On Behalf Of vietvon at comcast.net
Sent: Wednesday, February 12, 2014 18:52
To: logic at mailman.qth.net
Subject: Re: [LOGic] Logic 9
Ron, which .CDX files as I have a bunch. Also, using the Legacy seems to have helped even though my rig isn't listed under the ICOM list. Instead of a IC765 a IC 775 is listed to used that Legacy. 
----- Original Message -----
Nick,
Using the legacy rig drivers might help. When I have trouble I do this: 
Exit LOGic. Do a CLEAN UP INDEXES AND TEMPORARY FILES. Next, delete all of the .CDX files located in the folder that contains your database. Start LOGic. 
73 de Ron NØAT 
-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of vietvon at comcast.net
Sent: Tuesday, February 11, 2014 20:13
To: Logic
Subject: [LOGic] Logic 9 
I need some practical information concerning Logic 9. Since the installation it has not behaved as had 7, or 8. I continuously get "restart" notices and "Logic has to Close". I'm sick of it. The interface is working properly, the com ports are adjusted and so is the rig interface using the all other Icom interface. I'm using my trusty IC765 and while Logic worked like magic in earlier editions 9 is not. Has anyone had similar problems? 
vy 73,
Nick W9UM 
General Order #1 To take charge of this post and all government property in view. 
General Order #2 To walk my post in a military manner, keeping always on the alert and observing everything that takes place within sight or hearing. 
General Order #3 To report all violations of orders I am instructed to enforce. 
______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net 
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html 
______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net 
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html 
______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html