[LOGic] Logic8 and MicroHam MicroKeyerll

Wed Apr 15 17:49:23 EDT 2009

Larry,
The Microham router needs to define the ports you use to connect to the 
rig. Then the LOGic needs to use those ports. The Microham router 
software is just a vehicle used by any other program you might be using 
to access the rig via the ports you have defined. I used a Microham 
MKII for a while with LOGic; however, I did not access the router 
directly with LOGic, instead I used TRX-Manager which interfaced with 
the rig through the router software and then passed data to LOGic. It 
worked just fine.
73,
Carl
N8VZ
=========================
Larry Boyle wrote:
> Not sure where to ask this question here or there. What seems to be 
> happening is that both programs are looking at the Radio Via the cat 
> system (FT-1000D Version 6) and after awhile the logging program seems 
> to loose contact with the radio.
> Some timeout error. Should both the MicroKeyer ll and the Logic8 
> software be looking at the radio. I think they get collisions from 
> time to time and maybe that is what is causing to loose contact. Any 
> thoughts on this. Thanks, Larry KD6WI
>> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
>> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>>