[LOGic] 2 RIGS IN LOGIC

Wed Nov 28 19:21:51 EST 2007

Actually if you are using two Icoms using the CIV bus, a mini plug male "Y"
adapter will work. One serial to male mini CIV adapter will work for BOTH
rigs. I did that between an IC-7000 and a 765-PRO
If you do it that way, you may have to set "CIV-Transceive" in each radio to
OFF since when you turn the disl on one radio, the other may follow, even of
they are at separate addresses.
Ben
-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Mel Martin
Sent: Wednesday, November 28, 2007 4:13 PM
To: 'LOGic is open to all radio amateurs for discussion of LOGic logging
program'
Subject: RE: [LOGic] 2 RIGS IN LOGIC
There are a number of ways to do it either sharing a bus or using 2 CI-V
busses. It depends on your setup. Sharing a bus is a good idea if you are
using 2 transceivers but no other automated accessories using the same bus.
2 busses requires 2 RS232->TTL level converters. Give a bit more detail and
I can help.
+++ Mel
 
-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of Robie
Sent: November 28, 2007 14:56
To: LOGic is open to all radio amateurs for discussion of LOGic logging
program
Subject: Re: [LOGic] 2 RIGS IN LOGIC
Dan,
In a nut shell, you must set up each rig with its own port using the setup 
menu. You will see a seperate "rig" display for each rig in Logic. You can 
select the rig from which Logic will collect data on the Main log form.
If you have multiple ICOM rigs I believe it is possible to use only one port
and simply specivy different addresses for each rig.
Robie - AJ4F
----- Original Message ----- 
From: "K0DAN" <k0dan at comcast.net>
To: <logic at mailman.qth.net>
Sent: Wednesday, November 28, 2007 12:55 PM
Subject: [LOGic] 2 RIGS IN LOGIC
>I just added another transceiver to the hamshack and now have two HF
>stations on the air simultaneously. Can't find anything in the HELP index 
>for setting up two rigs with LOGIC.
>> What options do I have in order to connect both to LOGIC?
>> It'd be preferable to have both rigs simultaneously interfaced with 
> LOGIC,
> but I could live with fast switching between the two rigs (but prefer not 
> to have to swap cables and change setup menu each time).
>> Has this topic been sent to the archives?
>> Tnx es 73
> Dan
> K0DAN
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net http://mailman.qth.net/mailman/listinfo/logic

_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net http://mailman.qth.net/mailman/listinfo/logic
_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic