[Logic] Move to Spot Frequency with Orion

Wed Feb 9 21:14:22 EST 2005

Hi--
Bob, W2WG spent considerable time on the phone with me today. 
With his help, the Orion is fixed.
All we did was add a tiny delay between netting freq & mode. We think 
the problem occurs on very fast computers.
Pse download the latest update.
Tnx & 73,
Dennis WN4AZY
Date sent: 	2005年2月05日 17:04:19 -0600
From: 	Paul Frantz <w5pf at houston.rr.com>
To: 	"LOGic is open to all radio amateurs for discussion of LOGic logging program." <logic at mailman.qth.net>
Subject: 	Re: [Logic] Move to Spot Frequency with Orion
Send reply to: 	"LOGic is open to all radio amateurs for discussion of LOGic logging program." <logic at mailman.qth.net>
	program. " <logic.mailman.qth.net>
	<mailto:logic-request at mailman.qth.net?subject=unsubscribe>
	<mailto:logic-request at mailman.qth.net?subject=subscribe>
> Bob,
>> I also use Logic with the Orion. I rarely use Logic to set the rig to
> a frequency, so I had not noticed the problem you mentioned. I have
> played with it for a few minutes and find a similar problem. VFO A is
> set correctly and the main receiver is set to VFO A. The transmit is
> sometimes set to VFO A and sometimes to VFO B. VFO B stays on whatever
> frequency it was previously. Occasionally the transmit is turned off.
>> Hope this helps.
>> Paul W5PF
>> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
================================
WHEN REPLYING, PLEASE INCLUDE A COPY OF
THIS MESSAGE IN YOUR REPLY. THANK YOU.
Personal Database Applications
1323 Center Dr.
Auburn, GA 30011-3318 USA
770-307-1511 
770-307-1496 tech support
Check out our web page! Tell others about it! Thanks.
 http://www.hosenose.com/