[Logic] Error in Logic 6.0 /// READ THE HELP FILE ON BEFORE YOU DO THEY DO HELP \\\

2002年4月20日 11:48:45 -0500

This post by wb2jri answers all of my questions about the 1010 number field.
This statement that he shows is not in the program as delivered and it is
not added by the import programs so if you want the search capability you
have to do this.
As he says, be very sure you backup first!
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]On
> Behalf Of [email protected]
> Sent: Saturday, April 20, 2002 10:34 AM
> To: [email protected]
> Subject: Re: [Logic] Error in Logic 6.0 /// READ THE HELP FILE ON BEFORE
> YOU DO THEY DO HELP \\\
>>> Roland,
> I hope you backup your logs data before you added the
> numbers.
> I am using LOGic 5 and the first time I tried to add the 1010# data to
> LOGic
> it for some reason corrupted the list table. It wasn't a problem since I
> had my log
> data backup for the month.
>> Inspect you list table for the 1010# and make shore that the numbers were
> added to the list correctly.
>> On average Dennis takes about a week or so to answer email, must have
> tons
> since LOGic 6 came out. YOU did use the utility in the provided to add
> numbers?
>> I make a backup zip of the list table when ever I add 1010# to avoid this
> problem, which only
> happened the one time.
>> One other thing you must add the following, but befor you do read the
> LOGic 6 help to see if
> Dennis has an up dated verison of the following command. I am hopeing the
> he will come up
> with a better command which will correct some problems.
>> If you don't see a updated verison of the 1010# look up, add this line
> to
> "Copy From Prefix Table" Goto Log >Setup add below to and enty spot.
>> MAKE_TAG("1010#:", GETLISTVALUE("1010#", LOG.CALL))
>> ===READ THE HELP FILE ON BEFORE YOU DO THIS IF THIS IS YOUR FIRST TIME===
> == TAKE YOURE TIME AND READ HELPS DONT BE IN A RUSH ==
>> After take two of what ever and email me in the morning hi!!
>> 73
>> Tony WB2JRI
>>> On 2002年4月20日 07:38:57 -0500 "Roland Guidry"
> <[email protected]> writes:
> > I am have difficulty with this new program, Logic 6.0 Build 6.0.104.
> > When my
> > cursor passes over the userfield 1010#, I get an error as shown with
> > the
> > attached gif pic. When I chose "no" the program exits and when
> > restarted, I
> > have to perform a clean then restart.
> >
> > Sometime I get an error message that says "Invalid Subscript
> > Reference"
> > Cancel or Ignore. If I "Ignore" program continues to run, if I
> > cancel I get
> > other errors reported.
> >
> > The file I downloaded for 1010#'s came from Win1010 using their
> > 1010.txt
> > file. I do not have this problem with Logic 5.
> >
> > Has anyone encountered this same problem. I email [email protected] on
> > 4/18,
> > no response to date.
> >
> > Roland, WA5CHX
> >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
>>> 73
>> Tony WB2JRI
>>> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
> http://dl.www.juno.com/get/web/.
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>