[Logic] Hidden Windows

Sun, 7 Apr 2002 19:47:12 -0500

You cannot put the rig control on the desktop. You can click & drag it
around in LOGic. It will attach itself to the top, bottom or sides. Kind
of neat. You can drop it anywhere you want but, other windows will
cover it. Double clicking it will put it on top, bottom or sides. As long
as it is on in the windows tab, everything works fine here.
73, Mac N0OB
> Just a quick thought, or maybe foot-in-mouth since I haven't tried all the
> related configurations, but what happens if the rig control window is on
the
> desktop instead of in the LOGic window. I wonder if the report windows
> would still react the same. I'll try this and others as well.
>> Brad, N8GLS
>> -----Original Message-----
> From: [email protected] [mailto:[email protected]]On
> Behalf Of Carl Smidt
> Sent: Sunday, 07 April, 2002 2:30 PM
> To: [email protected]; [email protected]; Arthur Tan
> Cc: [email protected]
> Subject: [Logic] Hidden Windows
>>> This must be getting boring for most of you, my fellow LOGic subscribers,
> but I did some more experimenting and the report windows will ONLY come
> 'ON-TOP' when the rig control window is the active one. So each time I
want
> to print or modify a report, I have to make sure that the Rig Control
window
> is active by clicking on its 'blue bar'. Then all is well. Go figure!!!
Not
> really a big deal, now that I know, but I am sure that Dennis will figure
> out an appropriate fix for the problem in due course.
>> 73, Carl VE9OV
>> ----- Original Message -----
> From: "Carl Smidt" <[email protected]>
> To: <[email protected]>
> Cc: <[email protected]>; "Arthur Tan" <[email protected]>;
> <[email protected]>
> Sent: Sunday, April 07, 2002 2:59 PM
> Subject: [Logic] Hidden Windows
>>> > I spoke too soon. Before I sent the message below, I tried it several
> times
> > and it worked and the windows came 'on top'. After I sent the message
> below,
> > I went back and tried it again and this time the first window would ONLY
> > come 'on top' the Info window. I tried a few more times, and now the
> windows
> > are again completely hidden. :>(
> >
> > 73, Carl VE9OV
> > ----- Original Message -----
> > From: "Carl Smidt" <[email protected]>
> > To: <[email protected]>
> > Cc: <[email protected]>; "Arthur Tan" <[email protected]>;
> > <[email protected]>
> > Sent: Sunday, April 07, 2002 2:39 PM
> > Subject: Fw: [Logic] Hidden Windows
> >
> >
> > > Hi All,
> > >
> > > By God, wonders never cease. After I replied to Mac, below, I said to
> > > myself, "why not try to activate my, only, rig? No sooner said than
done
> > and
> > > the rig control window now appeared on the bottom of my screen . I
then
> > > tried to print a report and clicked, 'File' -> 'Print' -> 'Cards
> needed',
> > > and LO and BEHOLD, there the pop-up windows appeared ON TOP. The
> question
> > > now, Dennis, is, WHY??? Thanks Mac, don't know how you came across
that
> > > unusual solution, but it worked. This thing is getting better and
> better.
> > >
> > > 73, Carl VE9OV
> > >
> > > ----- Original Message -----
> > > From: "Carl Smidt" <[email protected]>
> > > To: < >
> > > Sent: Sunday, April 07, 2002 2:17 PM
> > > Subject: Re: [Logic] Not ready for prime time?
> > >
> > >
> > > >
> > > > > Are you running two rigs? If so, you may try this. In the windows
> tab
> > at
> > > > > the top, click both rigs on. You will have two rig conftrols on
the
> > > bottom
> > > > > but, I think the drop down window hiding problem will stop.
> > > > >
> > > > > 73, Mac N0OB
> > > >
> > > >
> > > > Tnx Mac, but I am only running one rig. My report windows are still
> > > hidden.
> > > >
> > > > 73, Carl VE9OV
> > > >
> > >
> >
>>>>> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>>> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic