[Logic] Rigblaster Plus, Logic6, CW Keying
Stephen J. Schrack
[email protected]
Mon, 1 Apr 2002 15:26:45 -0000
Yes I have the exact setup except I am running a PRO II but using the the
same 5C hex address as the PRO. Everything works great. Problem I had in the
begining was similar to your issue and turned out to be the diagram
incorrectly stated how to connect to the 1/4inch plug in the rigblaster plus
manual. I suggest you change/reverse your tip and ring solder connections
and that should fix the problem. Now if it was working prior to this for cw
keying and all you did was a software upgrade to logic 6 or something then
more information would be helpful.
Steve...
NL7ZL <[email protected]> said:
>> Has any one gotten a Rigblaster Plus, Logic 6, and Icom 756Pro to work with
> the keyer. I have the rigbalster set to the factory defaults for
> RTS/DTS. The keyer will key the transmitter but no audio is heard and
> there is no output power from the radio.
>> I have MixW working fine and can send CW as well as the other modes.
>> 73,
>> Tom
> NL7ZL
>> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>
--