[RFC PATCH v1] mtd: rawnand: meson: invalidate cache on polling ECC bit

Mon Mar 20 03:55:58 PDT 2023

Hi Dmitry,
ddrokosov at sberdevices.ru wrote on 2023年3月20日 13:43:14 +0300:
> Hello guys!
>> Was it applied to some nand 'prepare-for-merge' release branch?

Not yet, I'll apply it this week in mtd/fixes, you'll be noticed.
Thanks,
Miquèl
> On Mon, Mar 13, 2023 at 12:23:12PM +0100, Neil Armstrong wrote:
> > On 13/03/2023 12:18, Miquel Raynal wrote: 
> > > Hi Arseniy,
> > > 
> > > avkrasnov at sberdevices.ru wrote on 2023年3月13日 10:36:11 +0300:
> > > 
> > > > Hello,
> > > > 
> > > > we reproduced this problem on one of our boards. It triggers very rare
> > > > when 'usleep_range()' is present, but when sleeping is removed - it fires
> > > > always. I suppose problem is with caching, as 'info_buf' memory is mapped by
> > > > 'dma_map_single()'. 
> > > 
> > > The fix looks really legitimate, indeed I get that the usleep_range()
> > > might make it work most of the time but not always. Having this bit in
> > > a DMA buf area is a bit strange. Well, the fix LGTM anyway. 
> > 
> > Yep it looks legitimate!
> > 
> > LGTM
> > 
> > 
> > Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
> > 
> > > 
> > > > 
> > > > Thanks, Arseniy
> > > > 
> > > > On 13.03.2023 10:32, Arseniy Krasnov wrote: 
> > > > > 'info_buf' memory is cached and driver polls ECC bit in it. This bit
> > > > > is set by the NAND controller. If 'usleep_range()' returns before device
> > > > > sets this bit, 'info_buf' will be cached and driver won't see update of
> > > > > this bit and will loop forever.
> > > > > 
> > > > > Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
> > > > > Signed-off-by: Arseniy Krasnov <AVKrasnov at sberdevices.ru>
> > > > > ---
> > > > > drivers/mtd/nand/raw/meson_nand.c | 8 +++++++-
> > > > > 1 file changed, 7 insertions(+), 1 deletion(-)
> > > > > 
> > > > > diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
> > > > > index 5ee01231ac4c..2c05c08a0eaf 100644
> > > > > --- a/drivers/mtd/nand/raw/meson_nand.c
> > > > > +++ b/drivers/mtd/nand/raw/meson_nand.c
> > > > > @@ -176,6 +176,7 @@ struct meson_nfc {
> > > > > 	dma_addr_t daddr;
> > > > > 	dma_addr_t iaddr;
> > > > > +	u32 info_bytes;
> > > > > 	unsigned long assigned_cs;
> > > > > };
> > > > > @@ -503,6 +504,7 @@ static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, void *databuf,
> > > > > 					 nfc->daddr, datalen, dir);
> > > > > 			return ret;
> > > > > 		}
> > > > > +		nfc->info_bytes = infolen;
> > > > > 		cmd = GENCMDIADDRL(NFC_CMD_AIL, nfc->iaddr);
> > > > > 		writel(cmd, nfc->reg_base + NFC_REG_CMD);
> > > > > @@ -520,8 +522,10 @@ static void meson_nfc_dma_buffer_release(struct nand_chip *nand,
> > > > > 	struct meson_nfc *nfc = nand_get_controller_data(nand);
> > > > > 	dma_unmap_single(nfc->dev, nfc->daddr, datalen, dir);
> > > > > -	if (infolen)
> > > > > +	if (infolen) {
> > > > > 		dma_unmap_single(nfc->dev, nfc->iaddr, infolen, dir);
> > > > > +		nfc->info_bytes = 0;
> > > > > +	}
> > > > > }
> > > > > static int meson_nfc_read_buf(struct nand_chip *nand, u8 *buf, int len)
> > > > > @@ -710,6 +714,8 @@ static void meson_nfc_check_ecc_pages_valid(struct meson_nfc *nfc,
> > > > > 		usleep_range(10, 15);
> > > > > 		/* info is updated by nfc dma engine*/
> > > > > 		smp_rmb();
> > > > > +		dma_sync_single_for_cpu(nfc->dev, nfc->iaddr, nfc->info_bytes,
> > > > > +					DMA_FROM_DEVICE);
> > > > > 		ret = *info & ECC_COMPLETE;
> > > > > 	} while (!ret);
> > > > > } 
> > > 
> > > 
> > > Thanks,
> > > Miquèl 
> > 
>