[PATCH v2] mtd: rawnand: meson: check buffer length

Liang Yang liang.yang at amlogic.com
Thu Jun 8 05:37:14 PDT 2023


Hi Arseniy and Miquel,
On 2023年6月8日 15:12, Liang Yang wrote:
> Hi Miquel,
>> On 2023年6月8日 14:54, Miquel Raynal wrote:
>> [ EXTERNAL EMAIL ]
>>>> Hi Liang,
>>>> liang.yang at amlogic.com wrote on Thu, 8 Jun 2023 14:42:53 +0800:
>>>>> Hi Arseniy,
>>>>>> On 2023年6月8日 5:17, Arseniy Krasnov wrote:
>>>> [ EXTERNAL EMAIL ]
>>>>>>>> Hi again Miquel, Liang!
>>>>>>>> What do You think about this patch?
>>>>>>>> Thanks, Arseniy
>>>>>>>> On 06.06.2023 19:29, Arseniy Krasnov wrote:
>>>>> Sorry, here is changelog:
>>>>> v1 -> v2:
>>>>> * Move checks from 'switch/case' which executes commands in 
>>>>> 'meson_nfc_exec_op()' to a special
>>>>>     separated function 'meson_nfc_check_op()' which is called 
>>>>> before commands processing.
>>>>>>>>>> On 06.06.2023 13:16, Arseniy Krasnov wrote:
>>>>>> Meson NAND controller has limited buffer length, so check it before
>>>>>> command execution to avoid length trim. Also check MTD write size on
>>>>>> chip attach.
>>>>>>>>>>>> Signed-off-by: Arseniy Krasnov <AVKrasnov at sberdevices.ru>
>>>>>> ---
>>>>>>    drivers/mtd/nand/raw/meson_nand.c | 47 
>>>>>> +++++++++++++++++++++++++++----
>>>>>>    1 file changed, 42 insertions(+), 5 deletions(-)
>>>>>>>>>>>> diff --git a/drivers/mtd/nand/raw/meson_nand.c 
>>>>>> b/drivers/mtd/nand/raw/meson_nand.c
>>>>>> index 23a73268421b..db6b18753071 100644
>>>>>> --- a/drivers/mtd/nand/raw/meson_nand.c
>>>>>> +++ b/drivers/mtd/nand/raw/meson_nand.c
>>>>>> @@ -111,6 +111,8 @@
>>>>>>>>>>>>    #define PER_INFO_BYTE               8
>>>>>>>>>>>> +#define NFC_CMD_RAW_LEN     GENMASK(13, 0)
>>>>>> +
>>>>>>    struct meson_nfc_nand_chip {
>>>>>>        struct list_head node;
>>>>>>        struct nand_chip nand;
>>>>>> @@ -284,7 +286,7 @@ static void meson_nfc_cmd_access(struct 
>>>>>> nand_chip *nand, int raw, bool dir,
>>>>>>>>>>>>        if (raw) {
>>>>>>                len = mtd->writesize + mtd->oobsize;
>>>>>> -            cmd = (len & GENMASK(13, 0)) | scrambler | DMA_DIR(dir);
>>>>>> +            cmd = len | scrambler | DMA_DIR(dir);
>>>>>>                writel(cmd, nfc->reg_base + NFC_REG_CMD);
>>>>>> I think we could keep "& GENMASK(13, 0)". it is better here to 
>>> indicate how many bits of length in this command and don't destory 
>>> the command once we don't check the "len" outside of this function. 
>>> or the code "if (len >  NFC_CMD_RAW_LEN)" is better to put inside 
>>> this function nearly. Thanks.
>>>> It depends who calls this helper. If only used inside 
>> exec_op,write_page_raw() and read_page_raw() also call 
>> meson_nfc_cmd_access(), 
> but i don't find where constrain the "len".

Is the helper "meson_nfc_check_op()" needed by exec_op() after the 
constraint in attach_chip()? the length passed in exec_op() seems 
smaller than "mtd->writesize + mtd->oobsize" now.
@Arseniy if it does need, I think the same constraint is needed by
"meson_nfc_cmd_access()"
>>> it's not useful. If used outside, then if you want to clarify
>> things you may want to use:
>>>> #define NFC_CMD_OP_LEN(cmd) FIELD_PREP(GENMASK(13, 0), (cmd))
>>>> This is by far my favorite construction. Could apply to many other
>> fields, like DMA_DIR, scrambler, etc.

@Miquel, FIELD_PREP() is better, but i have no idea whether we should 
add FIELD_PREP() in this patch, or keep the previous code.
>>>>>>>>                return;
>>>>>>        }
>>>>>> @@ -573,7 +575,7 @@ static int meson_nfc_read_buf(struct nand_chip 
>>>>>> *nand, u8 *buf, int len)
>>>>>>        if (ret)
>>>>>>                goto out;
>>>>>>>>>>>> -    cmd = NFC_CMD_N2M | (len & GENMASK(13, 0));
>>>>>> +    cmd = NFC_CMD_N2M | len;
>>>>>>        writel(cmd, nfc->reg_base + NFC_REG_CMD);
>>>>>>>>>>>>        meson_nfc_drain_cmd(nfc);
>>>>>> @@ -597,7 +599,7 @@ static int meson_nfc_write_buf(struct 
>>>>>> nand_chip *nand, u8 *buf, int len)
>>>>>>        if (ret)
>>>>>>                return ret;
>>>>>>>>>>>> -    cmd = NFC_CMD_M2N | (len & GENMASK(13, 0));
>>>>>> +    cmd = NFC_CMD_M2N | len;
>>>>>>        writel(cmd, nfc->reg_base + NFC_REG_CMD);
>>>>>>>>>>>>        meson_nfc_drain_cmd(nfc);
>>>>>> @@ -1007,6 +1009,31 @@ meson_nand_op_put_dma_safe_output_buf(const 
>>>>>> struct nand_op_instr *instr,
>>>>>>                kfree(buf);
>>>>>>    }
>>>>>>>>>>>> +static int meson_nfc_check_op(struct nand_chip *chip,
>>>>>> +                          const struct nand_operation *op)
>>>>>> +{
>>>>>> +    int op_id;
>>>>>> +
>>>>>> +    for (op_id = 0; op_id < op->ninstrs; op_id++) {
>>>>>> +            const struct nand_op_instr *instr;
>>>>>> +
>>>>>> +            instr = &op->instrs[op_id];
>>>>>> +
>>>>>> +            switch (instr->type) {
>>>>>> +            case NAND_OP_DATA_IN_INSTR:
>>>>>> +            case NAND_OP_DATA_OUT_INSTR:
>>>>>> +                    if (instr->ctx.data.len > NFC_CMD_RAW_LEN)
>>>>>> +                            return -ENOTSUPP;
>>>>>> +
>>>>>> +                    break;
>>>>>> +            default:
>>>>>> +                    break;
>>>>>> +            }
>>>>>> +    }
>>>>>> +
>>>>>> +    return 0;
>>>>>> +}
>>>>>> +
>>>>>>    static int meson_nfc_exec_op(struct nand_chip *nand,
>>>>>>                             const struct nand_operation *op, bool 
>>>>>> check_only)
>>>>>>    {
>>>>>> @@ -1015,10 +1042,12 @@ static int meson_nfc_exec_op(struct 
>>>>>> nand_chip *nand,
>>>>>>        const struct nand_op_instr *instr = NULL;
>>>>>>        void *buf;
>>>>>>        u32 op_id, delay_idle, cmd;
>>>>>> +    int err;
>>>>>>        int i;
>>>>>>>>>>>> -    if (check_only)
>>>>>> -            return 0;
>>>>>> +    err = meson_nfc_check_op(nand, op);
>>>>>> +    if (err || check_only)
>>>>>> +            return err;
>>>>>>>>>>>>        meson_nfc_select_chip(nand, op->cs);
>>>>>>        for (op_id = 0; op_id < op->ninstrs; op_id++) {
>>>>>> @@ -1293,6 +1322,7 @@ static int meson_nand_attach_chip(struct 
>>>>>> nand_chip *nand)
>>>>>>        struct meson_nfc_nand_chip *meson_chip = to_meson_nand(nand);
>>>>>>        struct mtd_info *mtd = nand_to_mtd(nand);
>>>>>>        int nsectors = mtd->writesize / 1024;
>>>>>> +    int raw_writesize;
>>>>>>        int ret;
>>>>>>>>>>>>        if (!mtd->name) {
>>>>>> @@ -1304,6 +1334,13 @@ static int meson_nand_attach_chip(struct 
>>>>>> nand_chip *nand)
>>>>>>                        return -ENOMEM;
>>>>>>        }
>>>>>>>>>>>> +    raw_writesize = mtd->writesize + mtd->oobsize;
>>>>>> +    if (raw_writesize > NFC_CMD_RAW_LEN) {
>>>>>> +            dev_err(nfc->dev, "too big write size in raw mode: %d 
>>>>>> > %ld\n",
>>>>>> +                    raw_writesize, NFC_CMD_RAW_LEN);
>>>>>> +            return -EINVAL;
>>>>>> +    }
>>>>>> +
>>>>>>        if (nand->bbt_options & NAND_BBT_USE_FLASH)
>>>>>>                nand->bbt_options |= NAND_BBT_NO_OOB;
>>>>>>>>>>>> Thanks,
>> Miquèl



More information about the linux-mtd mailing list

AltStyle によって変換されたページ (->オリジナル) /