March 2011 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Mar 1 00:58:49 EST 2011
Ending: Wed Mar 23 15:55:37 EDT 2011
Messages: 2723

• [PATCH 2/5] ARM: gic: Add distributor and interface enable/disable accessory api Santosh Shilimkar
• [PATCH resend] omap: Fix linker error in drivers/video/omap/lcd_2430sdp.c Tomi Valkeinen
  • [PATCH resend] omap: Fix linker error in drivers/video/omap/lcd_2430sdp.c Tony Lindgren
• [PATCH 1/2] ARM imx53: add pwm devices support Jason Chen
  • [PATCH 1/2] ARM imx53: add pwm devices support Eric Miao
  • [PATCH 1/2] ARM imx53: add pwm devices support Uwe Kleine-König
    • [PATCH 1/2] ARM imx53: add pwm devices support Eric Miao
      • [PATCH 1/2] ARM imx53: add pwm devices support Uwe Kleine-König
    • [PATCH 1/2] ARM imx53: add pwm devices support Jason Chen
• [PATCH 2/2] ARM MX53_LOCO: add pwm backlight device Jason Chen
• [PATCH 1/1] GPIO support for WM8505 Tony Prisk
• [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage Nicolas Pitre
  • [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage John Bonesio
    • [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage Nicolas Pitre
  • [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage John Bonesio
    • [PATCH 1/4] ARM:boot:device tree: Allow the device tree binary to be appended to zImage Nicolas Pitre
• [PATCH 2/4] ARM:boot:device tree: Merge specific atags into the device tree Nicolas Pitre
  • [PATCH 2/4] ARM:boot:device tree: Merge specific atags into the device tree Grant Likely
• [PATCH 4/4] ARM:boot:device tree: Allow multiple device trees to be appended to zImage Nicolas Pitre
• [PATCH v2 5/9] OMAP2+: hwmod: rename some init functions DebBarma, Tarun Kanti
• [PATCH v2 02/13] da850: pruss platform specific additions. Subhasish Ghosh
  • [PATCH v2 02/13] da850: pruss platform specific additions. TK, Pratheesh Gangadhar
• [PATCH v2 2/4] msm: iommu: Rework clock logic and add IOMMU bus clock control Trilok Soni
• [PATCH] plat-mxc: Provide irq_chip name for GPIO IRQs Alexander Stein
  • [PATCH] plat-mxc: Provide irq_chip name for GPIO IRQs Wolfram Sang
• [PATCH 1/4] ASoC: Add TI tlv320aic32x4 codec support. javier Martin
  • [PATCH 1/4] ASoC: Add TI tlv320aic32x4 codec support. Mark Brown
• [RFC] device.h: add device_set_platdata routine Uwe Kleine-König
  • [RFC] device.h: add device_set_platdata routine viresh kumar
    • [RFC] device.h: add device_set_platdata routine Uwe Kleine-König
      • [RFC] device.h: add device_set_platdata routine viresh kumar
  • [RFC] device.h: add device_set_platdata routine Greg KH
• [RFC PATCH] ARM: Use generic BUG() handler Russell King - ARM Linux
  • [RFC PATCH] ARM: Use generic BUG() handler Russell King - ARM Linux
    • [RFC PATCH] ARM: Use generic BUG() handler Mikael Pettersson
      • [RFC PATCH] ARM: Use generic BUG() handler Russell King - ARM Linux
      • [RFC PATCH] ARM: Use generic BUG() handler Simon Glass
      • [RFC PATCH] ARM: Use generic BUG() handler Russell King - ARM Linux
      • [RFC PATCH] ARM: Use generic BUG() handler Dave Martin
      • [RFC PATCH] ARM: Use generic BUG() handler Russell King - ARM Linux
      • [RFC PATCH] ARM: Use generic BUG() handler Dave Martin
• [PATCH 3/8] Add a mfd IPUv3 driver Sascha Hauer
  • [PATCH 3/8] Add a mfd IPUv3 driver Arnd Bergmann
    • [PATCH 3/8] Add a mfd IPUv3 driver Sascha Hauer
      • [PATCH 3/8] Add a mfd IPUv3 driver Arnd Bergmann
      • [PATCH 3/8] Add a mfd IPUv3 driver Thomas Gleixner
• [PATCH 1/3] ARM: S5P: Add s5p_timer support for HRT Sylwester Nawrocki
• [PATCH] arm: mxs: add irq_chip-name for GPIO IRQs Wolfram Sang
  • [PATCH] arm: mxs: add irq_chip-name for GPIO IRQs Shawn Guo
• [PATCH v2] plat-mxc: Provide irq_chip name for GPIO IRQs Alexander Stein
• [PATCH 1/2] ARM imx53: add pwm devices support Jason Chen
  • [PATCH 2/2] ARM MX53_LOCO: add pwm backlight device Jason Chen
    • [PATCH 2/2] ARM MX53_LOCO: add pwm backlight device Sascha Hauer
  • [PATCH 1/2] ARM imx53: add pwm devices support Fabio Estevam
    • [PATCH 1/2] ARM imx53: add pwm devices support Uwe Kleine-König
• [PATCH 3/8] Add a mfd IPUv3 driver Sascha Hauer
  • [PATCH 3/8] Add a mfd IPUv3 driver Thomas Gleixner
    • [PATCH 3/8] Add a mfd IPUv3 driver Sascha Hauer
• [PATCH v6 1/1] PRUSS UIO driver support Thomas Gleixner
• Linux support for Samsung S3C2510A Processor Madhavi Manchala
• [PATCH v6 1/1] PRUSS UIO driver support Thomas Gleixner
• [PATCH V4 1/4] ARM: imx53_loco: add esdhc device support Richard Zhu
  • [PATCH V4 2/4] ARM: imx51/53: add sdhc3/4 clock Richard Zhu
  • [PATCH V4 3/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS Richard Zhu
  • [PATCH V4 4/4] mmc: sdhci-esdhc: enable esdhc on imx53 Richard Zhu
  • [PATCH V4 1/4] ARM: imx53_loco: add esdhc device support Fabio Estevam
• [PATCH v10 05/18] OMAP2, 3 DSS2 Change driver name to omap_display Cousson, Benoit
• [PATCH 1/4] msm: scm: Mark inline asm as volatile Will Deacon
• [PATCH 2/4] msm: scm: Fix improper register assignment Will Deacon
  • [PATCH 2/4] msm: scm: Fix improper register assignment Saravana Kannan
    • [PATCH 2/4] msm: scm: Fix improper register assignment Nicolas Pitre
• [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip Thomas Gleixner
  • [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip Russell King - ARM Linux
    • [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip Thomas Gleixner
      • [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip Russell King - ARM Linux
      • [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip Thomas Gleixner
      • [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip Russell King - ARM Linux
      • [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip Russell King - ARM Linux
      • [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip Thomas Gleixner
      • [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip Russell King - ARM Linux
      • [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip Thomas Gleixner
      • [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip Will Deacon
      • [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip Thomas Gleixner
      • [PATCH 6/6] ARM: nmk: update GPIO chained IRQ handler to use EOI in parent chip Will Deacon
• [PATCH V5 00/63] Updating SPEAr Support viresh kumar
• [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes Viresh Kumar
  • [PATCH V6 1/8] ST SPEAr: Reordering #includes in .h & .c files. Viresh Kumar
  • [PATCH V6 2/8] ST SPEAr: Include mach/hardware.h instead of mach/spear.h Viresh Kumar
  • [PATCH V6 3/8] ST SPEAr3xx: Rename sdio to sdhci Viresh Kumar
  • [PATCH V6 4/8] ST SPEAr Clock Framework: Rename usbd clock and align apb_clk entry Viresh Kumar
  • [PATCH V6 5/8] ST SPEAr3xx: Declare device structures after shirq code Viresh Kumar
  • [PATCH V6 6/8] ST SPEAr: Replacing SIZE macro's with SZ_4K macros Viresh Kumar
  • [PATCH V6 7/8] ST SPEAr: Remove unused *_SIZE macros from spear*.h files Viresh Kumar
    • [PATCH V6 7/8] ST SPEAr: Remove unused *_SIZE macros from spear*.h files Russell King - ARM Linux
      • [PATCH V6 7/8] ST SPEAr: Remove unused *_SIZE macros from spear*.h files viresh kumar
  • [PATCH V6 8/8] ST SPEAr: Append UL to device address macros. Viresh Kumar
  • [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes Russell King - ARM Linux
    • [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes Russell King - ARM Linux
      • [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes Russell King - ARM Linux
      • [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes viresh kumar
      • [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes viresh kumar
    • [PATCH V6 0/8] SPEAr3xx & SPEAr6xx Fixes viresh kumar
• [PATCH V6 00/11] SPEAr3xx & SPEAr6xx: Single Image solution and padmux updates Viresh Kumar
  • [PATCH V6 01/11] ST SPEAr: Pad multiplexing handling modified Viresh Kumar
  • [PATCH V6 02/11] ST SPEAr clock: Define common clk_init routine in plat/clock.c Viresh Kumar
  • [PATCH V6 03/11] ST SPEAr Clock: Updating for single image solution Viresh Kumar
  • [PATCH V6 04/11] ST SPEAr3xx: Make local shirq structures static Viresh Kumar
  • [PATCH V6 05/11] ST SPEAR3xx: Rename register/irq defines to remove naming conflicts Viresh Kumar
  • [PATCH V6 06/11] ST SPEAr3xx: Rework pmx_dev code to remove conflicts Viresh Kumar
  • [PATCH V6 07/11] ST SPEAr3xx: Appending spear3** with global device structures Viresh Kumar
  • [PATCH V6 08/11] ST SPEAr3xx: Rework KConfig to allow all boards to be compiled in Viresh Kumar
  • [PATCH V6 09/11] ST SPEAr3xx: Replace defconfigs with single unified defconfig Viresh Kumar
  • [PATCH V6 10/11] ST SPEAr6xx: Rework Kconfig for single image solution Viresh Kumar
  • [PATCH V6 11/11] ST SPEAR6xx: renaming spear600_defconfig as spear6xx_defconfig Viresh Kumar
  • [PATCH V6 00/11] SPEAr3xx & SPEAr6xx: Single Image solution and padmux updates viresh kumar
    • [PATCH V6 00/11] SPEAr3xx & SPEAr6xx: Single Image solution and padmux updates Russell King - ARM Linux
• [PATCH V6 00/10] Adding SPEAr13xx support Viresh Kumar
  • [PATCH V6 02/10] ST SPEAr13xx: Adding machine specific src files Viresh Kumar
  • [PATCH V6 03/10] ST SPEAr13xx: Adding support in SPEAr generic plat/ Viresh Kumar
  • [PATCH V6 04/10] ST SPEAr13xx: Added compilation support in arch/arm/ Viresh Kumar
  • [PATCH V6 05/10] ST SPEAr13xx: Adding default config file Viresh Kumar
  • [PATCH V6 06/10] ST SPEAr13xx: Adding information in Documentation/ and MAINTAINERS Viresh Kumar
  • [PATCH V6 07/10] ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms Viresh Kumar
  • [PATCH V6 08/10] ST SPEAr13xx: add L2 cache support Viresh Kumar
  • [PATCH V6 09/10] ST SPEAr13xx: Adding support for SPEAr1310 Viresh Kumar
  • [PATCH V6 10/10] ST SPEAr13xx: Add padmux support Viresh Kumar
• [PATCH V6 01/10] ST SPEAr13xx: Adding machine specific header files Viresh Kumar
• [PATCH V6 00/17] Adding devices support for all spear machines Viresh Kumar
  • [PATCH V6 02/17] ST SPEAr13xx: Added PCIe host controller base driver support. Viresh Kumar
    • [PATCH V6 02/17] ST SPEAr13xx: Added PCIe host controller base driver support. Arnd Bergmann
      • [PATCH V6 02/17] ST SPEAr13xx: Added PCIe host controller base driver support. shiraz hashim
      • [PATCH V6 02/17] ST SPEAr13xx: Added PCIe host controller base driver support. Arnd Bergmann
      • [PATCH V6 02/17] ST SPEAr13xx: Added PCIe host controller base driver support. pratyush
  • [PATCH V6 03/17] ST SPEAr: Adding PLGPIO driver for spear platform Viresh Kumar
  • [PATCH V6 04/17] ST SPEAr3xx: Adding support for ST's PWM IP Viresh Kumar
  • [PATCH V6 05/17] ST SPEAr: Adding Watchdog support on spear3xx & spear6xx machines Viresh Kumar
  • [PATCH V6 06/17] ST SPEAr3xx: Adding RAS uart devices Viresh Kumar
  • [PATCH V6 07/17] ST SPEAr320: Adding support for CAN Viresh Kumar
  • [PATCH V6 08/17] ST SPEAr3xx: EMI (External Memory Interface) controller driver Viresh Kumar
  • [PATCH V6 09/17] ST SPEAr: Adding machine support for rtc-spear Viresh Kumar
  • [PATCH V6 10/17] ST SPEAr: adding support for synopsis i2c designware Viresh Kumar
  • [PATCH V6 11/17] ST SPEAr: Adding machine support for USB host Viresh Kumar
  • [PATCH V6 12/17] ST SPEAr: Adding machine support for keyboard Viresh Kumar
  • [PATCH V6 13/17] ST SPEAr: Adding machine support for nand Viresh Kumar
  • [PATCH V6 14/17] ST SPEAr: Adding support for SSP PL022 Viresh Kumar
  • [PATCH V6 15/17] ST SPEAr: Adding support for SDHCI (SDIO) Viresh Kumar
  • [PATCH V6 16/17] ST SPEAr Power Management: Added the support for Standby mode. Viresh Kumar
  • [PATCH V6 17/17] ST SPEAr: Updating defconfigs Viresh Kumar
• [PATCH V6 01/17] ST SPEAr13xx: Added ARM PL061 GPIO Support Viresh Kumar
• [PATCH V6 0/3] Clock Framework & CPU Freq Updates Viresh Kumar
  • [PATCH V6 1/3] ST SPEAr Clock Framework: Adding support for DDR Viresh Kumar
  • [PATCH V6 2/3] ST SPEAr Clock Framework: Adding support for PLL frequency change Viresh Kumar
  • [PATCH V6 3/3] ST SPEAr CPU freq: Adding support for CPU Freq framework Viresh Kumar
• [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53 Wolfram Sang
  • [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53 Zhu Richard-R65037
    • [PATCH V3 4/4] mmc: sdhci-esdhc: enable esdhc on imx53 Wolfram Sang
• [PATCH 3/6] ARM: tegra: update GPIO chained IRQ handler to use EOI in parent chip Sergei Shtylyov
  • [PATCH 3/6] ARM: tegra: update GPIO chained IRQ handler to use EOI in parent chip Will Deacon
• [PATCH 4/6] ARM: s5pv310: update IRQ combiner to use EOI in parent chip Sergei Shtylyov
• [PATCH 0/3] arm: support pmu irq routed from CTI tom.leiming at gmail.com
  • [PATCH 1/3] arm: introduce cross trigger interface helpers tom.leiming at gmail.com
  • [PATCH 2/3] arm: pmu: support pmu irq routed from CTI tom.leiming at gmail.com
    • [PATCH 2/3] arm: pmu: support pmu irq routed from CTI Will Deacon
  • [PATCH 3/3] arm: omap4: support pmu tom.leiming at gmail.com
    • [PATCH 3/3] arm: omap4: support pmu Santosh Shilimkar
• [RFC] MMC: error handling improvements Sahitya Tummala
• [PATCH v2 13/13] tty: pruss SUART driver Subhasish Ghosh
  • [PATCH v2 13/13] tty: pruss SUART driver Alan Cox
• [PATCH] mach-ux500: activate fix for errata 753970 Linus Walleij
• [PATCH 2/4] msm: scm: Fix improper register assignment Will Deacon
• No subject Javier Martin
  • [PATCH v2 1/4] ASoC: Add TI tlv320aic32x4 codec support. Javier Martin
    • [PATCH v2 1/4] ASoC: Add TI tlv320aic32x4 codec support. Mark Brown
      • [PATCH v2 1/4] ASoC: Add TI tlv320aic32x4 codec support. javier Martin
      • [PATCH v2 1/4] ASoC: Add TI tlv320aic32x4 codec support. Mark Brown
  • [PATCH v2 2/4] ASoC: Fix burstsize and DSP_B format problems in imx-ssi. Javier Martin
    • [PATCH v2 2/4] ASoC: Fix burstsize and DSP_B format problems in imx-ssi. Liam Girdwood
    • [PATCH v2 2/4] ASoC: Fix burstsize and DSP_B format problems in imx-ssi. Mark Brown
  • [PATCH v2 3/4] ASoC: Add machine driver for Visstrim_M10 board. Javier Martin
  • [PATCH v2 4/4] ARM: Add SSI and aic3204 code to Visstrim_M10 boards. Javier Martin
• [PATCH] mach-ux500: activate USB in the U8500 defconfig Linus Walleij
• [PATCH 2/3] arm: pmu: support pmu irq routed from CTI Ming Lei
• [PATCH] audio:am3517evm support for AIC23 Abhilash K V
  • [PATCH] audio:am3517evm support for AIC23 Jarkko Nikula
• [PATCH 0/3] OMAP2+ hwmod fixes Cousson, Benoit
  • [PATCH 0/3] OMAP2+ hwmod fixes Paul Walmsley
• [patch v1 0/3] arm: support pmu irq routed from CTI tom.leiming at gmail.com
  • [patch v1 1/3] arm: introduce cross trigger interface helpers tom.leiming at gmail.com
  • [patch v1 2/3] arm: pmu: support pmu irq routed from CTI tom.leiming at gmail.com
    • [patch v1 2/3] arm: pmu: support pmu irq routed from CTI Will Deacon
      • [patch v1 2/3] arm: pmu: support pmu irq routed from CTI Ming Lei
  • [patch v1 3/3] arm: omap4: support pmu tom.leiming at gmail.com
    • [patch v1 3/3] arm: omap4: support pmu Felipe Balbi
• resend hsudc patches for s3c24xx? Heiko Stübner
• [PATCH] ARM: vexpress ct-ca9x4: only set twd_base if local timers are being used Sergei Shtylyov
  • [PATCH] ARM: vexpress ct-ca9x4: only set twd_base if local timers are being used Will Deacon
    • [PATCH] ARM: vexpress ct-ca9x4: only set twd_base if local timers are being used Sergei Shtylyov
• [GIT PULL] omap fixes for v2.6.38-rc6 Aaro Koskinen
  • [GIT PULL] omap fixes for v2.6.38-rc6 Kevin Hilman
• [RFC PATCH] ARM: Use generic BUG() handler Dave Martin
• [PATCH v6 1/1] PRUSS UIO driver support Hans J. Koch
  • [PATCH v6 1/1] PRUSS UIO driver support TK, Pratheesh Gangadhar
    • [PATCH v6 1/1] PRUSS UIO driver support Thomas Gleixner
• [PATCH] ARM: enable CONFIG_KTIME_SCALAR Rob Herring
• Fwd: [RFC] MMC: error handling improvements Murali Krishna Palnati
  • Fwd: [RFC] MMC: error handling improvements Russell King - ARM Linux
  • Fwd: [RFC] MMC: error handling improvements Linus Walleij
• MMC quirks relating to performance/lifetime. Jens Axboe
  • MMC quirks relating to performance/lifetime. Arnd Bergmann
    • MMC quirks relating to performance/lifetime. Jens Axboe
      • MMC quirks relating to performance/lifetime. Arnd Bergmann
      • MMC quirks relating to performance/lifetime. Andrei Warkentin
    • MMC quirks relating to performance/lifetime. Andrei Warkentin
      • MMC quirks relating to performance/lifetime. Andrei Warkentin
• [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file Sricharan R
  • [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file Govindraj
    • [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file Sricharan R
      • [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file Govindraj
      • [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file Tony Lindgren
      • [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file Govindraj
      • [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file Sricharan R
      • [PATCH 6/7] OMAP: Serial: Allow UART parameters to be configured from board file Govindraj
• [PATCH] omap:iommu-added cache flushing operation for L2 cache Fernando Guzman Lugo
  • [PATCH] OMAP:iommu - pgd and pte entries weren't getting flushed out Fernando Guzman Lugo
    • [PATCH] OMAP:iommu - pgd and pte entries weren't getting flushed out David Cohen
  • [PATCH] omap:iommu-added cache flushing operation for L2 cache David Cohen
    • [PATCH] omap:iommu-added cache flushing operation for L2 cache Gupta, Ramesh
  • [PATCH] omap:iommu-added cache flushing operation for L2 cache Santosh Shilimkar
    • [PATCH] omap:iommu-added cache flushing operation for L2 cache Gupta, Ramesh
    • [PATCH] omap:iommu-added cache flushing operation for L2 cache Gupta, Ramesh
• [PATCH 1/5] ARM: mx35_3ds: Add I2C support Fabio Estevam
  • [PATCH 2/5] ARM: mx31_3ds: Add I2C support Fabio Estevam
    • [PATCH 3/5] ARM: mx27_3ds: Add I2C support Fabio Estevam
  • [PATCH 1/5] ARM: mx35_3ds: Add I2C support Uwe Kleine-König
    • [PATCH 1/5] ARM: mx35_3ds: Add I2C support Jason Liu
      • [PATCH 1/5] ARM: mx35_3ds: Add I2C support Sascha Hauer
      • [PATCH 1/5] ARM: mx35_3ds: Add I2C support Jason Liu
• [PATCH 4/5] ARM: mx25_3ds: Add I2C support Fabio Estevam
  • [PATCH 5/5] ARM: mx53_smd: Add I2C support Fabio Estevam
• [RFC PATCH 5/5] RFC: msm: sps: Smart Peripheral System (SPS) driver. David Brown
• [PATCH] S3C64XX: Fix keypad setup to configure correct number of rows Mark Brown
  • [PATCH] S3C64XX: Fix keypad setup to configure correct number of rows Kukjin Kim
• [PATCH 0/2] 3 build failures in imx-for-2.6.39 Uwe Kleine-König
  • [PATCH 1/2] ARM: mx3/cpuimx35: fix build failure Uwe Kleine-König
    • [PATCH 1/2] ARM: mx3/cpuimx35: fix build failure Russell King - ARM Linux
      • [PATCH 1/2] ARM: mx3/cpuimx35: fix build failure Uwe Kleine-König
  • [PATCH 2/2] ARM: mx3/pcm043: fix build failure Uwe Kleine-König
    • [PATCH 2/2] ARM: mx3/pcm043: fix build failure Fabio Estevam
• [RFC PATCH] ARM: Use generic BUG() handler Russell King - ARM Linux
• [PATCH 1/2] ARM: iomux-imx31: mark pin_list as const Uwe Kleine-König
  • [PATCH 2/2] ARM: mxc91231/iomux: mark pin_list as const Uwe Kleine-König
  • [PATCH 1/2 v2] ARM: iomux-imx31: allow pin_list to be const Uwe Kleine-König
  • [PATCH 2/2 v2] ARM: mxc91231/iomux: allow pin_list to be const Uwe Kleine-König
• [patch 1/2] mc13892: reboot on wdi event Liam Girdwood
• [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx Kevin Hilman
  • [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx Paul Walmsley
• [PATCH] ARM: mx5: forbid building i.MX51 with any of i.MX50 or i.MX53 Uwe Kleine-König
• [PATCH v7 0/1] Add PRUSS UIO driver support Pratheesh Gangadhar
  • [PATCH v7 1/1] PRUSS UIO driver support Pratheesh Gangadhar
    • [PATCH v7 1/1] PRUSS UIO driver support Thomas Gleixner
      • [PATCH v7 1/1] PRUSS UIO driver support Hans J. Koch
      • [PATCH v7 1/1] PRUSS UIO driver support TK, Pratheesh Gangadhar
      • [PATCH v7 1/1] PRUSS UIO driver support Thomas Gleixner
• [PATCH] OMAP2+: PM: Warn users of sleep_while_idle if !CONFIG_CPU_IDLE Kevin Hilman
  • [PATCH] OMAP2+: PM: Warn users of sleep_while_idle if !CONFIG_CPU_IDLE Rajendra Nayak
• [PATCH 0/2] OMAP3: cpuidle: prevent CORE pwrdm from entering low-power state when DSS active Paul Walmsley
  • [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on Paul Walmsley
    • [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on Kevin Hilman
      • [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on Tero.Kristo at nokia.com
      • [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on Kevin Hilman
      • [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on Tero.Kristo at nokia.com
      • [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on Kevin Hilman
      • [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on Paul Walmsley
      • [PATCH 1/2] OMAP3: cpuidle: prevent CORE power domain from going to RET or OFF when DSS is on Paul Walmsley
  • [PATCH 2/2] OMAP3: cpuidle: add more details to the DSS-related CORE power domain state restriction Paul Walmsley
  • [PATCH 0/2] OMAP3: cpuidle: prevent CORE pwrdm from entering low-power state when DSS active Tero.Kristo at nokia.com
• [GIT PULL] OMAP PM fixes for 2.6.38-rc Kevin Hilman
  • [GIT PULL] OMAP PM fixes for 2.6.38-rc Kevin Hilman
• [PATCH] OMAP2+: hwmod: use status bit info for reset line Omar Ramirez Luna
  • [PATCH] OMAP2+: hwmod: use status bit info for reset line Paul Walmsley
    • [PATCH] OMAP2+: hwmod: use status bit info for reset line Ramirez Luna, Omar
• [PATCH 2/6] ARM: pxa2xx: reorganize I2C files Ben Dooks
• [PATCH 3/6] i2c-pxa2xx: Add PCI support for PXA I2C controller Ben Dooks
  • [PATCH v2] i2c-pxa2xx: Add PCI support for PXA I2C controller Sebastian Andrzej Siewior
• [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Andrei Warkentin
  • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Saravana Kannan
    • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Ryan Mallon
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Saravana Kannan
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Ryan Mallon
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Saravana Kannan
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Ryan Mallon
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Saravana Kannan
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Ryan Mallon
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Saravana Kannan
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Ryan Mallon
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Saravana Kannan
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Ryan Mallon
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Maxime Coquelin
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Ryan Mallon
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Maxime Coquelin
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Linus Walleij
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Maxime Coquelin
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Saravana Kannan
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Jamie Iles
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Maxime Coquelin
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Linus Walleij
      • [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data Jamie Iles
• [PATCH] ARM: imx/mx25_3ds: Fix build failure Fabio Estevam
  • [PATCH] ARM: imx/mx25_3ds: Fix build failure Uwe Kleine-König
  • [PATCH] ARM: imx/mx25_3ds: Fix build failure Sascha Hauer
• [PATCH] ARM: EXYNOS4: enabled lcd and backlight in NURI board Donghwa Lee
  • [PATCH] ARM: EXYNOS4: enabled lcd and backlight in NURI board Kukjin Kim
    • [PATCH] ARM: EXYNOS4: enabled lcd and backlight in NURI board Donghwa Lee
      • [PATCH] ARM: EXYNOS4: enabled lcd and backlight in NURI board Kukjin Kim
• CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness Saravana Kannan
  • CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness Arnd Bergmann
    • CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness Saravana Kannan
  • CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness Russell King - ARM Linux
    • CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness Saravana Kannan
      • CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness Catalin Marinas
      • CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness Saravana Kannan
      • CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness Russell King - ARM Linux
      • CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness Saravana Kannan
      • CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness Russell King - ARM Linux
      • CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness Saravana Kannan
      • CONFIG_ARM_DMA_MEM_BUFFERABLE and readl/writel weirdness Russell King - ARM Linux
• Store buffer and l2x0_cache_sync Colin Cross
  • Store buffer and l2x0_cache_sync Catalin Marinas
• Common suspend and resume with L2 cache on Colin Cross
• [PATCH] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums Dima Zavin
  • [PATCH] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums Saravana Kannan
• [PATCH 2/6] ARM: pxa2xx: reorganize I2C files Eric Miao
• [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X Richard Zhao
  • [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X Shawn Guo
  • [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X Uwe Kleine-König
    • [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X Richard Zhao
      • [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X Uwe Kleine-König
      • [RFC PATCH 1/1] ARM: imx5x: clean up ARCH_MX5X Richard Zhao
    • [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice Uwe Kleine-König
      • [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice Richard Zhao
      • [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice Uwe Kleine-König
      • [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice Sascha Hauer
      • [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice Uwe Kleine-König
      • [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice Sascha Hauer
      • [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice Uwe Kleine-König
      • [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice Sascha Hauer
      • [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice Uwe Kleine-König
      • [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice Uwe Kleine-König
      • [PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice Uwe Kleine-König
• [PATCH v3 0/2] msm: add single-wire serial bus interface (SSBI) driver Kenneth Heitke
  • [PATCH v3 1/2] MAINTAINERS: Add drivers/platform/msm to MSM subsystem Kenneth Heitke
    • [PATCH v3 1/2] MAINTAINERS: Add drivers/platform/msm to MSM subsystem David Brown
  • [PATCH v3 2/2] platform-drivers: msm: add single-wire serial bus interface (SSBI) driver Kenneth Heitke
• [PATCH] msm: Add SSBI support for MSM8960 Kenneth Heitke
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Varadarajan, Charulatha
  • [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Govindraj
• [PATCH V2 2/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S3C6410 Banajit Goswami
  • [PATCH V2 3/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5P6440 Banajit Goswami
  • [PATCH V2 4/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5P6450 Banajit Goswami
  • [PATCH V2 6/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5PV210 Banajit Goswami
  • [PATCH V2 2/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S3C6410 Kukjin Kim
• [PATCH V2 5/6] ARM: SAMSUNG: Add PWM backlight support on Samsung S5PC100 Banajit Goswami
• [PATCH V4] ARM: EXYNOS4: Implement kernel timers using MCT Kukjin Kim
  • [PATCH V4] ARM: EXYNOS4: Implement kernel timers using MCT Kyungmin Park
• [PATCH] MX1: Add structure, registration functions for framebuffer and rename LCDC INT Gwenhael Goavec-Merou
• [PATCH] ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices Mark Brown
  • [PATCH] ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices Mark Brown
• [PATCH V5 1/6] ARM: imx51/53: add sdhc3/4 clock Richard Zhu
  • [PATCH V5 3/6] mmc: add the abort CMDTYE bits definition Richard Zhu
  • [PATCH V5 4/6] mmc: sdhci-esdhc: make the writel/readl as the general APIs Richard Zhu
    • [PATCH V5 4/6] mmc: sdhci-esdhc: make the writel/readl as the general APIs Wolfram Sang
• [PATCH V5 2/6] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS Richard Zhu
• [PATCH V5 5/6] mmc: sdhci-esdhc: enable esdhc on imx53 Richard Zhu
• [PATCH V5 6/6] ARM: imx53_loco: add esdhc device support Richard Zhu
• [PATCH] ARM: mxs/mx28evk: add flexcan devices Shawn Guo
  • [PATCH] ARM: mxs/mx28evk: add flexcan devices Sascha Hauer
    • [PATCH] ARM: mxs/mx28evk: add flexcan devices Shawn Guo
      • [PATCH] ARM: mxs/mx28evk: add flexcan devices Sascha Hauer
      • [PATCH] ARM: mxs/mx28evk: add flexcan devices Shawn Guo
      • [PATCH] ARM: mxs/mx28evk: add flexcan devices Sascha Hauer
  • [PATCH] ARM: mxs/mx28evk: add flexcan devices Uwe Kleine-König
    • [PATCH] ARM: mxs/mx28evk: add flexcan devices Shawn Guo
• [PATCH v2 00/18] OMAP3+: PM: introduce SR class 1.5 Nishanth Menon
  • [PATCH v2 01/18] omap3: hwmod: add smartreflex irqs Nishanth Menon
  • [PATCH v2 02/18] omap3+: voltage: remove initial voltage Nishanth Menon
  • [PATCH v2 03/18] omap3+: voltage: remove spurious pr_notice for debugfs Nishanth Menon
  • [PATCH v2 04/18] omap3+: voltage: use IS_ERR_OR_NULL Nishanth Menon
  • [PATCH v2 05/18] omap3+: voltage: use volt_data pointer instead values Nishanth Menon
  • [PATCH v2 06/18] omap3+: voltage: add transdone apis Nishanth Menon
  • [PATCH v2 07/18] omap3+: sr: make notify independent of class Nishanth Menon
  • [PATCH v2 08/18] omap3+: sr: introduce class init, deinit and priv data Nishanth Menon
  • [PATCH v2 09/18] omap3+: sr: fix cosmetic indentation Nishanth Menon
  • [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled Nishanth Menon
    • [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled Sergei Shtylyov
      • [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled Nishanth Menon
      • [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled Sergei Shtylyov
      • [PATCH v2 10/18] omap3+: sr: call handler with interrupt disabled Nishanth Menon
  • [PATCH v2 11/18] omap3+: sr: disable interrupt by default Nishanth Menon
  • [PATCH v2 12/18] omap3+: sr: enable/disable SR only on need Nishanth Menon
  • [PATCH v2 13/18] omap3+: sr: introduce notifiers flags Nishanth Menon
  • [PATCH v2 14/18] omap3+: sr: introduce notifier_control Nishanth Menon
  • [PATCH v2 15/18] omap3+: sr: disable spamming interrupts Nishanth Menon
    • [PATCH v2 15/18] omap3+: sr: disable spamming interrupts Sergei Shtylyov
      • [PATCH v2 15/18] omap3+: sr: disable spamming interrupts Nishanth Menon
  • [PATCH v2 16/18] omap3+: sr: make enable path use volt_data pointer Nishanth Menon
  • [PATCH v2 17/18] omap3630+: sr: add support for class 1.5 Nishanth Menon
  • [PATCH v2 18/18] omap3430: sr: class3: restrict cpu to run on Nishanth Menon
• [patch v2 0/3] arm: pmu: support pmu/perf on OMAP4 tom.leiming at gmail.com
  • [patch v2 1/3] arm: introduce cross trigger interface helpers tom.leiming at gmail.com
  • [patch v2 2/3] arm: pmu: allow platform specifc irq enable/disable handling tom.leiming at gmail.com
    • [patch v2 2/3] arm: pmu: allow platform specifc irq enable/disable handling Will Deacon
  • [patch v2 3/3] arm: omap4: support pmu tom.leiming at gmail.com
    • [patch v2 3/3] arm: omap4: support pmu Santosh Shilimkar
• [PATCH] i.MX some patches Sascha Hauer
  • [PATCH 1/4] ARM i.MX: Move gpio initialization to SoC specific files Sascha Hauer
    • [PATCH 1/4] ARM i.MX: Move gpio initialization to SoC specific files Russell King - ARM Linux
      • [PATCH 1/4] ARM i.MX: Move gpio initialization to SoC specific files Sascha Hauer
      • [PATCH 1/4] ARM i.MX: Move gpio initialization to SoC specific files Russell King - ARM Linux
  • [PATCH 2/4] ARM i.MX: iomux v1 initialization away from initcall Sascha Hauer
  • [PATCH 3/4] ARM i.MX31 lilly: remove incomplete otg support Sascha Hauer
  • [PATCH 4/4] ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceivers Sascha Hauer
• [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Govindraj.R
  • [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Kevin Hilman
    • [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Kevin Hilman
      • [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Govindraj
      • [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Tony Lindgren
      • [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Kevin Hilman
      • [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Paul Walmsley
      • [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Paul Walmsley
      • [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Govindraj
    • [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Govindraj
      • [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Kevin Hilman
      • [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Govindraj
  • [PATCH 2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads Kevin Hilman
• [PATCH v8 0/1] Add PRUSS UIO driver support Pratheesh Gangadhar
  • [PATCH v8 1/1] PRUSS UIO driver support Pratheesh Gangadhar
    • [PATCH v8 1/1] PRUSS UIO driver support Arnd Bergmann
      • [PATCH v8 1/1] PRUSS UIO driver support TK, Pratheesh Gangadhar
    • [PATCH v8 1/1] PRUSS UIO driver support Thomas Gleixner
    • [PATCH v8 1/1] PRUSS UIO driver support Hans J. Koch
      • [PATCH v8 1/1] PRUSS UIO driver support Arnd Bergmann
      • [PATCH v8 1/1] PRUSS UIO driver support Thomas Gleixner
      • [PATCH v8 1/1] PRUSS UIO driver support TK, Pratheesh Gangadhar
• [PATCH 0/3] ARM: tegra: PCI-e improvements Mike Rapoport
  • [PATCH 2/3] ARM: tegra: add PCI Express power gating Mike Rapoport
  • [PATCH 3/3] ARM: tegra: trimslice: initialize PCI-e only when running on TrimSlice Mike Rapoport
  • [PATCH 0/3] ARM: tegra: PCI-e improvements Colin Cross
• [PATCH 1/3] ARM: tegra: PCIE minor code refactoring Mike Rapoport
• [PATCH] ARM: mx3/mx35_3ds: Use MX35 USB OTG Erratum Fabio Estevam
• [patch v2 2/3] arm: pmu: allow platform specifc irq enable/disable handling Ming Lei
  • [patch v2 2/3] arm: pmu: allow platform specifc irq enable/disable handling Will Deacon
• Question about free_pgd_slow ? Rabin Vincent
  • Question about free_pgd_slow ? rocky
• [PATCH v5] dmaengine: mxs-dma: add dma support for i.MX23/28 Koul, Vinod
• [PATCH 1/2] ARM: mx5/mx53_smd: Fix IOMUX for UART2 Fabio Estevam
  • [PATCH 2/2] ARM: mx5/mx53_evk: Fix IOMUX for UART3 Fabio Estevam
• [PATCH 0/8 resend] dw_dmac: Extending support & minor fixes Koul, Vinod
  • [PATCH 0/8 resend] dw_dmac: Extending support & minor fixes viresh kumar
• [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32 Koul, Vinod
  • [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32 viresh kumar
    • [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32 Shiraz Hashim
      • [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32 Russell King - ARM Linux
      • [PATCH 1/8 resend] dw_dmac: Remove compilation dependency from AVR32 viresh kumar
• [RFC PATCH 00/20] A15 architected timer support Marc Zyngier
  • [RFC PATCH 01/20] ARM: architected timers: move local timer support to percpu_timer.c Marc Zyngier
  • [RFC PATCH 02/20] ARM: omap2: remove stubbed twd_timer_setup call Marc Zyngier
  • [RFC PATCH 03/20] ARM: exynos4: remove stubbed twd_timer_setup call Marc Zyngier
  • [RFC PATCH 04/20] ARM: shmobile: remove stubbed twd_timer_setup call Marc Zyngier
  • [RFC PATCH 05/20] ARM: tegra: remove stubbed twd_timer_setup call Marc Zyngier
  • [RFC PATCH 06/20] ARM: ux500: remove stubbed twd_timer_setup call Marc Zyngier
  • [RFC PATCH 07/20] ARM: versatile: remove stubbed twd_timer_setup call Marc Zyngier
  • [RFC PATCH 08/20] ARM: remove unused twd_timer_setup stub Marc Zyngier
  • [RFC PATCH 09/20] ARM: architected timers: add A15 architected timers Marc Zyngier
  • [RFC PATCH 10/20] ARM: Platform dependent sched_clock() override Marc Zyngier
  • [RFC PATCH 11/20] ARM: architected timers: Add A15 specific sched_clock implementation Marc Zyngier
  • [RFC PATCH 12/20] ARM: versatile/vexpress: rework timer support Marc Zyngier
  • [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function Marc Zyngier
    • [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function David Brown
      • [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function Marc Zyngier
    • [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function David Brown
      • [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function Marc Zyngier
      • [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function David Brown
      • [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function Marc Zyngier
      • [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function David Brown
      • [RFC PATCH 13/20] ARM: msm: dynamically register local timer setup function Marc Zyngier
  • [RFC PATCH 14/20] ARM: omap4: dynamically register local timer setup function Marc Zyngier
  • [RFC PATCH 15/20] ARM: exynos4: dynamically register local timer setup function Marc Zyngier
  • [RFC PATCH 16/20] ARM: shmobile: dynamically register local timer setup function Marc Zyngier
  • [RFC PATCH 17/20] ARM: tegra: dynamically register local timer setup function Marc Zyngier
  • [RFC PATCH 18/20] ARM: ux500: dynamically register local timer setup function Marc Zyngier
  • [RFC PATCH 19/20] ARM: simplify percpu_timer_setup Marc Zyngier
  • [RFC PATCH 20/20] ARM: simplify percpu_timer_ack Marc Zyngier
• [PATCH 1/1] davinci: changed SRAM allocator to shared ram. Nori, Sekhar
• [PATCHv1] ARM: imx: Add support for low power suspend on MX51. Dinh.Nguyen at freescale.com
  • [PATCHv1] ARM: imx: Add support for low power suspend on MX51. Arnaud Patard (Rtp)
    • [PATCHv1] ARM: imx: Add support for low power suspend on MX51. Nguyen Dinh-R00091
  • [PATCHv1] ARM: imx: Add support for low power suspend on MX51. Uwe Kleine-König
    • [PATCHv1] ARM: imx: Add support for low power suspend on MX51. Thomas Gleixner
      • [PATCHv1] ARM: imx: Add support for low power suspend on MX51. Uwe Kleine-König
      • [PATCHv1] ARM: imx: Add support for low power suspend on MX51. Thomas Gleixner
      • [PATCHv1] ARM: imx: Add support for low power suspend on MX51. Uwe Kleine-König
    • [PATCHv1] ARM: imx: Add support for low power suspend on MX51. Russell King - ARM Linux
      • [PATCHv1] ARM: imx: Add support for low power suspend on MX51. Uwe Kleine-König
      • [PATCHv1] ARM: imx: Add support for low power suspend on MX51. Russell King - ARM Linux
      • [PATCHv1] ARM: imx: Add support for low power suspend on MX51. Uwe Kleine-König
• [PATCH/RFC 0/3] ARM: S5P: Add common DPHY control code for MIPI-CSIS/MIPI-DSIM devices Sylwester Nawrocki
  • [PATCH 1/3] ARM: S5P: Rename MIPI-CSIS header and update Copyright Sylwester Nawrocki
    • [PATCH 1/3] ARM: S5P: Rename MIPI-CSIS header and update Copyright Kukjin Kim
      • [PATCH 1/3] ARM: S5P: Rename MIPI-CSIS header and update Copyright Sylwester Nawrocki
  • [PATCH 2/3] ARM: S5PV210: Add clock entries for MIPI DPHY control Sylwester Nawrocki
  • [PATCH 3/3] ARM: EXYNOS4: Add clock entries for MIPI DPHY control Sylwester Nawrocki
  • [PATCH/RFC 0/3] ARM: S5P: Add common DPHY control code for MIPI-CSIS/MIPI-DSIM devices Kukjin Kim
    • [PATCH v2 0/3] ARM: S5P: Add D-PHY control platform helpers for MIPI-CSIS/DSIM drivers Sylwester Nawrocki
      • [PATCH v2 0/3] ARM: S5P: Add D-PHY control platform helpers for MIPI-CSIS/DSIM drivers Kukjin Kim
    • [PATCH v2 1/3] ARM: S5P: Rename MIPI-CSIS driver header and update Copyright Sylwester Nawrocki
    • [PATCH v2 2/3] ARM: S5P: Extend MIPI-CSIS platform_data with the PHY control callback Sylwester Nawrocki
      • [PATCH v2] ARM: S5P: Extend MIPI-CSIS platform_data with the PHY control callback Sylwester Nawrocki
    • [PATCH v2 3/3] ARM: S5P: Add support for common MIPI CSIS/DSIM D-PHY control Sylwester Nawrocki
      • [PATCH v2 3/3] ARM: S5P: Add support for common MIPI CSIS/DSIM D-PHY control Kukjin Kim
      • [PATCH v3 0/3] ARM: S5P: Add platform helpers for MIPI-CSIS/DSIM DPHY Sylwester Nawrocki
      • [PATCH v3 1/3] ARM: S5P: Rename MIPI-CSIS driver header and update Copyright Sylwester Nawrocki
      • [PATCH v3 1/3] ARM: S5P: Rename MIPI-CSIS driver header and update Copyright Kukjin Kim
      • [PATCH v3 2/3] ARM: S5P: Extend MIPI-CSIS platform_data with the PHY control callback Sylwester Nawrocki
      • [PATCH v3 2/3] ARM: S5P: Extend MIPI-CSIS platform_data with the PHY control callback Kukjin Kim
      • [PATCH v3 3/3] ARM: S5P: Add support for common MIPI CSIS/DSIM D-PHY control Sylwester Nawrocki
      • [PATCH v2 3/3] ARM: S5P: Add support for common MIPI CSIS/DSIM D-PHY control Sylwester Nawrocki
• [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods Tony Lindgren
  • [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods Cousson, Benoit
    • [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods Cousson, Benoit
      • [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods Tony Lindgren
      • [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods Cousson, Benoit
      • [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods Paul Walmsley
      • [PATCH 0/8] OMAP2+: hwmod/clockevent: allow late-init of individual hwmods Santosh Shilimkar
• [PATCH 4/8 resend] dw_dmac: calling dwc_scan_descriptors from dwc_tx_status() after taking lock Koul, Vinod
  • [PATCH 4/8 resend] dw_dmac: calling dwc_scan_descriptors from dwc_tx_status() after taking lock viresh kumar
• [PATCH] EDB93xx: Add support for CS4271 SPI-connected CODEC H Hartley Sweeten
• [PATCH 6/8 resend] dw_dmac: Mark all tx_descriptors with DMA_CRTL_ACK after xfer finish Koul, Vinod
  • [PATCH 6/8 resend] dw_dmac: Mark all tx_descriptors with DMA_CRTL_ACK after xfer finish viresh kumar
• [PATCH 7/8 resend] dw_dmac.c: Pass Channel Allocation Order from platform_data Koul, Vinod
  • [PATCH 7/8 resend] dw_dmac.c: Pass Channel Allocation Order from platform_data viresh kumar
• [patch v2 0/2] Get watchdog reboot working on efika smartbook Arnaud Patard (Rtp)
  • [patch v2 1/2] mc13892: reboot on wdi event Arnaud Patard (Rtp)
    • [patch v2 1/2] mc13892: reboot on wdi event Uwe Kleine-König
      • [patch v2 1/2] mc13892: reboot on wdi event Arnaud Patard (Rtp)
    • [patch v2 1/2] mc13892: reboot on wdi event Sergei Shtylyov
  • [patch v2 2/2] efika mx/sb: enable watchdog Arnaud Patard (Rtp)
    • [patch v2 2/2] efika mx/sb: enable watchdog Sascha Hauer
• [PATCH 8/8 resend] dw_dmac.c: Pass Channel Priority from platform_data Koul, Vinod
  • [PATCH 8/8 resend] dw_dmac.c: Pass Channel Priority from platform_data viresh kumar
• [patch 1/1] t5325: add audio support Arnaud Patard (Rtp)
  • [patch 1/1] t5325: add audio support Nicolas Pitre
    • [patch 1/1] t5325: add audio support Arnaud Patard (Rtp)
• about MISC_DEVICES not being enabled in many defconfigs Uwe Kleine-König
• [PATCH 0/4] Initial patches for MSM display update Carl Vanderlip
  • [PATCH 1/4] video: msmfb: Put the partial update magic value into the fix_screen struct. Carl Vanderlip
  • [PATCH 2/4] [ARM] msm: mdp: Add support for RGBX 8888 image format. Carl Vanderlip
  • [PATCH 3/4] [ARM] msm_fb: Fix framebuffer console Carl Vanderlip
    • [PATCH 3/4] [ARM] msm_fb: Fix framebuffer console Carl Vanderlip
      • [PATCH 3/4] [ARM] msm_fb: Fix framebuffer console Arve Hjønnevåg
  • [PATCH 4/4] [ARM] msm: mdp: Set the correct pack pattern for XRGB/ARGB Carl Vanderlip
  • [PATCH 0/4] Initial patches for MSM display update David Brown
• [patch 1/1] t5325: add audio support Arnaud Patard (Rtp)
• [PATCH 01/17] omap4: pm: Add omap WakeupGen module support Kevin Hilman
  • [PATCH 01/17] omap4: pm: Add omap WakeupGen module support Santosh Shilimkar
• [PATCH 02/17] omap4: pm: Add SAR RAM support Kevin Hilman
  • [PATCH 02/17] omap4: pm: Add SAR RAM support Santosh Shilimkar
• [PATCH 03/17] omap4: Export scu base address Kevin Hilman
  • [PATCH 03/17] omap4: Export scu base address Santosh Shilimkar
• [PATCH 04/17] omap4: pm: Add CPUx OFF mode support Kevin Hilman
  • [PATCH 04/17] omap4: pm: Add CPUx OFF mode support Santosh Shilimkar
• [Qualcomm PM8921 MFD 0/6] *** SUBJECT HERE *** adharmap at codeaurora.org
  • [Qualcomm PM8921 MFD 1/6] mfd: pm8921: Add PMIC 8921 core driver adharmap at codeaurora.org
  • [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support adharmap at codeaurora.org
  • [Qualcomm PM8921 MFD 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver adharmap at codeaurora.org
  • [Qualcomm PM8921 MFD 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver adharmap at codeaurora.org
  • [Qualcomm PM8921 MFD 5/6] MAINTAINERS: Add pmic8921, pmic8xxx subdevices maintainers adharmap at codeaurora.org
  • [Qualcomm PM8921 MFD 6/6] msm: board-8960: Add support for pm8921 adharmap at codeaurora.org
• [PATCHv2] omap:mailbox: resolve hang issue Armando Uribe
  • [PATCHv2] omap:mailbox: resolve hang issue Tony Lindgren
    • [PATCHv2] omap:mailbox: resolve hang issue Guzman Lugo, Fernando
• [PATCH 05/17] omap4: pm: Initialise all the clockdomains to supported states Kevin Hilman
  • [PATCH 05/17] omap4: pm: Initialise all the clockdomains to supported states Santosh Shilimkar
• [Qualcomm PM8921 MFD 0/6] pmic 8921 core and subdevices adharmap at codeaurora.org
• [PATCH 07/17] omap4: pm: CPU1 wakeup workaround form Low power modes Kevin Hilman
  • [PATCH 07/17] omap4: pm: CPU1 wakeup workaround form Low power modes Santosh Shilimkar
• [Qualcomm PM8921 MFD 1/6] mfd: pm8921: Add PMIC 8921 core driver Mark Brown
  • [Qualcomm PM8921 MFD 1/6] mfd: pm8921: Add PMIC 8921 core driver Abhijeet Dharmapurikar
• [PATCH 08/17] omap4: pm: Add GIC save/restore support Kevin Hilman
  • [PATCH 08/17] omap4: pm: Add GIC save/restore support Santosh Shilimkar
    • [PATCH 08/17] omap4: pm: Add GIC save/restore support Kevin Hilman
  • [PATCH 08/17] omap4: pm: Add GIC save/restore support Santosh Shilimkar
    • [PATCH 08/17] omap4: pm: Add GIC save/restore support Kevin Hilman
      • [PATCH 08/17] omap4: pm: Add GIC save/restore support Santosh Shilimkar
• [PATCH 09/17] omap4: pm: Add WakeupGen save/restore support Kevin Hilman
• [PATCH 10/17] omap4: pm: Add L2 cache lowpower support Kevin Hilman
  • [PATCH 10/17] omap4: pm: Add L2 cache lowpower support Santosh Shilimkar
• [PATCH] arm: etm: fix section mismatch warning tom.leiming at gmail.com
• [PATCH] arm: omap: fix section mismatch warning tom.leiming at gmail.com
  • [PATCH] arm: omap: fix section mismatch warning Tony Lindgren
• [PATCH 11/17] omap4: suspend: Add MPUSS RET and OFF support Kevin Hilman
  • [PATCH 11/17] omap4: suspend: Add MPUSS RET and OFF support Santosh Shilimkar
• [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support Mark Brown
  • [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support Abhijeet Dharmapurikar
    • [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support Mark Brown
      • [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support Abhijeet Dharmapurikar
      • [Qualcomm PM8921 MFD 2/6] mfd: pm8xxx: Add irq support Mark Brown
• [Qualcomm PM8921 MFD 5/6] MAINTAINERS: Add pmic8921, pmic8xxx subdevices maintainers Joe Perches
  • [Qualcomm PM8921 MFD 5/6] MAINTAINERS: Add pmic8921, pmic8xxx subdevices maintainers Abhijeet Dharmapurikar
• [PATCH 12/17] omap4: pm-debug: Add wakeup timer and debug counters Kevin Hilman
  • [PATCH 12/17] omap4: pm-debug: Add wakeup timer and debug counters Santosh Shilimkar
    • [PATCH 12/17] omap4: pm-debug: Add wakeup timer and debug counters Kevin Hilman
      • [PATCH 12/17] omap4: pm-debug: Add wakeup timer and debug counters Santosh Shilimkar
• [PATCH 13/17] omap4: cpuidle: Basic CPUidle support Kevin Hilman
• [PATCH 14/17] omap4: cpuidle: Add MPUSS RET OFF states Kevin Hilman
• [PATCH 16/17] omap4: cpuidle: Allow debugfs control through enable_off_mode Kevin Hilman
• [PATCH 07/17] omap4: pm: CPU1 wakeup workaround form Low power modes Kevin Hilman
• [PATCH 00/17] omap4: pm: suspend, hotplug and cpuilde support Kevin Hilman
  • [PATCH 00/17] omap4: pm: suspend, hotplug and cpuilde support Santosh Shilimkar
  • [PATCH 00/17] omap4: pm: suspend, hotplug and cpuilde support Santosh Shilimkar
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL Kevin Hilman
• [PATCH] perf: add OMAP support for the new power events Kevin Hilman
• [PATCH] ldp: Fix regulator mapping for ads7846 TS controller Tony Lindgren
• [PATCH] ARM: mx51: Print silicon revision on boot Fabio Estevam
  • [PATCH] ARM: mx51: Print silicon revision on boot Arnaud Patard (Rtp)
    • [PATCH] ARM: mx51: Print silicon revision on boot Fabio Estevam
      • [PATCH] ARM: mx51: Print silicon revision on boot Sascha Hauer
      • [PATCH] ARM: mx51: Print silicon revision on boot Arnaud Patard (Rtp)
      • [PATCH] ARM: mx51: Print silicon revision on boot Sascha Hauer
• [PATCH 0/6] omap3: pm: Fixes for low power code Kevin Hilman
  • [PATCH 0/6] omap3: pm: Fixes for low power code Santosh Shilimkar
  • [PATCH 0/6] omap3: pm: Fixes for low power code Santosh Shilimkar
• [PATCH v2] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board Kukjin Kim
  • [PATCH v3] ARM: EXYNOS4: add support for i2c PMICs on Universal_C210 board Marek Szyprowski
    • [PATCH v3] ARM: EXYNOS4: add support for i2c PMICs on Universal_C210 board Kukjin Kim
• [PATCH] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board Kyungmin Park
  • [PATCH] ARM: S5PC210: add support for i2c PMICs on Universal_C210 board Russell King - ARM Linux
• [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear Lei Wen
  • [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear Lei Wen
    • [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear Artem Bityutskiy
      • [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear Lei Wen
      • [PATCH V5 1/6] pxa3xx_nand: make scan procedure more clear Artem Bityutskiy
• [PATCH V5 6/6] pxa3xx_nand: clean the keep configure code Lei Wen
• [PATCH V5 Resend] ST SPEAr: PCIE gadget suppport pratyush
• [PATCH] ST SPEAr: PCIe Gadget: Documentation for support of multiple device Pratyush Anand
• [PATCH 0/2] Common struct clk implementation, v14 Jeremy Kerr
• [PATCH 1/2] Add a common struct clk Jeremy Kerr
• [PATCH 2/2] clk: Generic support for fixed-rate clocks Jeremy Kerr
  • [PATCH 0/2] Common struct clk implementation, v14 Uwe Kleine-König
  • [PATCH 0/2] Common struct clk implementation, v14 Jeremy Kerr
    • [PATCH 0/2] Common struct clk implementation, v14 Jeremy Kerr
• [PATCH] ARM: EXYNOS4: Add ARMLEX4210 Board support file ALIM AKHTAR
  • [PATCH] ARM: EXYNOS4: Add ARMLEX4210 Board support file Kyungmin Park
    • [PATCH] ARM: EXYNOS4: Add ARMLEX4210 Board support file Kukjin Kim
• [PATCH] ARM: S5P: Add platform helpers for camera GPIO configuration Kukjin Kim
• [PATCH] ARM: S5P: Add platform helpers for camera GPIO configuration Kukjin Kim
  • [PATCH] ARM: S5P: Add platform helpers for camera GPIO configuration Sylwester Nawrocki
  • [PATCH v2] ARM: S5P: Add platform helpers for camera GPIO configuration Sylwester Nawrocki
    • [PATCH v2] ARM: S5P: Add platform helpers for camera GPIO configuration Kukjin Kim
• [PATCH 1/1] CPU Frequency Scaling for VT8500/WM8505 Tony Prisk
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X Richard Zhao
  • [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X Uwe Kleine-König
    • [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X Richard Zhao
      • [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X Sascha Hauer
  • [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X Shawn Guo
• [PATCH 2/2] ARM: imx3x: clean up ARCH_MX3X Richard Zhao
• [PATCH V2 00/13] dmaengine/dw_dmac: Extending support & minor fixes Viresh Kumar
  • [PATCH V2 03/13] dw_dmac: Move single descriptor from dwc->queue to dwc->active_list in dwc_complete_all Viresh Kumar
  • [PATCH V2 04/13] dw_dmac: Calling dwc_scan_descriptors from dwc_tx_status() after taking lock Viresh Kumar
  • [PATCH V2 05/13] dw_dmac: Adding support for 64 bit access width for memcpy xfers Viresh Kumar
  • [PATCH V2 06/13] dw_dmac: Change value of DWC_MAX_COUNT to 4095. Viresh Kumar
    • [PATCH V2 06/13] dw_dmac: Change value of DWC_MAX_COUNT to 4095. viresh kumar
  • [PATCH V2 07/13] dw_dmac: Mark all tx_descriptors with DMA_CRTL_ACK after xfer finish Viresh Kumar
  • [PATCH V2 08/13] dw_dmac: Pass Channel Allocation Order from platform_data Viresh Kumar
  • [PATCH V2 09/13] dw_dmac: Pass Channel Priority from platform_data Viresh Kumar
  • [PATCH V2 10/13] dw_dmac: Changing type of src_master and dest_master to u8. Viresh Kumar
  • [PATCH V2 11/13] dw_dmac: Allow src/dst msize & flow controller to be configured at runtime Viresh Kumar
    • [PATCH V2 11/13] dw_dmac: Allow src/dst msize & flow controller to be configured at runtime viresh kumar
  • [PATCH V2 12/13] dw_dmac: Setting Default Burst length for transfers as 16. Viresh Kumar
  • [PATCH V2 13/13] avr32: at32ap700x: Specify DMA Flow Controller, Src and Dst msize Viresh Kumar
  • [PATCH 06/13 resend] dw_dmac: Change value of DWC_MAX_COUNT to 4095. Viresh Kumar
  • [PATCH 11/13 resend] dw_dmac: Allow src/dst msize & flow controller to be configured at runtime Viresh Kumar
  • [PATCH V2 00/13] dmaengine/dw_dmac: Extending support & minor fixes Koul, Vinod
• [PATCH V2 01/13] dw_dmac: Remove compilation dependency from AVR32 and put on HAVE_CLK Viresh Kumar
• [PATCH V2 02/13] dw_dmac: Replace module_init() with subsys_initcall() Viresh Kumar
• [PATCH] perf: add OMAP support for the new power events Jean Pihet
  • [PATCH] perf: add OMAP support for the new power events Kevin Hilman
    • [PATCH] perf: add OMAP support for the new power events Jean Pihet
      • [PATCH] perf: add OMAP support for the new power events Kevin Hilman
  • [PATCH] perf: add OMAP support for the new power events Paul Walmsley
    • [PATCH] perf: add OMAP support for the new power events Jean Pihet
• [patch v3 0/3] arm: pmu: support pmu/perf on OMAP4 tom.leiming at gmail.com
  • [patch v3 1/3] arm: introduce cross trigger interface helpers tom.leiming at gmail.com
    • [patch v3 1/3] arm: introduce cross trigger interface helpers Jean Pihet
      • [patch v3 1/3] arm: introduce cross trigger interface helpers Jean Pihet
      • [patch v3 1/3] arm: introduce cross trigger interface helpers Ming Lei
    • [patch v3 1/3] arm: introduce cross trigger interface helpers Santosh Shilimkar
  • [patch v3 2/3] arm: pmu: allow platform specific irq enable/disable handling tom.leiming at gmail.com
    • [patch v3 2/3] arm: pmu: allow platform specific irq enable/disable handling Jean Pihet
      • [patch v3 2/3] arm: pmu: allow platform specific irq enable/disable handling Jean Pihet
  • [patch v3 3/3] arm: omap4: support pmu tom.leiming at gmail.com
    • [patch v3 3/3] arm: omap4: support pmu Tony Lindgren
    • [patch v3 3/3] arm: omap4: support pmu Santosh Shilimkar
      • [patch v3 3/3] arm: omap4: support pmu Jean Pihet
  • [patch v3 0/3] arm: pmu: support pmu/perf on OMAP4 Jean Pihet
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X Shawn Guo
• clcdfb: Question about clcdfb_check() routine vksamar
  • clcdfb: Question about clcdfb_check() routine Russell King - ARM Linux
• [PATCH] ARM: Thumb-2: Add local symbols to work around gas behaviour Dave Martin
  • [PATCH] ARM: Thumb-2: Add local symbols to work around gas behaviour Russell King - ARM Linux
    • [PATCH] ARM: Thumb-2: Add local symbols to work around gas behaviour Dave Martin
  • [PATCH] ARM: Thumb-2: Add local symbols to work around gas behaviour Nicolas Pitre
• Compiling a kernel for armv5 + armv6 Sascha Hauer
  • Compiling a kernel for armv5 + armv6 saeed bishara
    • Compiling a kernel for armv5 + armv6 Sascha Hauer
  • Compiling a kernel for armv5 + armv6 Russell King - ARM Linux
• [PATCH] remove kconfig dependencies from ARCH_MX*/MACH_MX* Sascha Hauer
  • [PATCH 2/6] rtc i.MX Dryice: use IMX_HAVE_PLATFORM_IMXDI_RTC to depend on Sascha Hauer
  • [PATCH 3/6] usb i.MX21: use IMX_HAVE_PLATFORM_IMX21_HCD to depend on Sascha Hauer
  • [PATCH 4/6] video i.MX: remove mx1 compile time dependencies Sascha Hauer
    • [PATCH 4/6] video i.MX: remove mx1 compile time dependencies Baruch Siach
      • [PATCH 4/6] video i.MX: remove mx1 compile time dependencies Sascha Hauer
  • [PATCH 5/6] watchdog i.MX: use IMX_HAVE_PLATFORM_IMX2_WDT to depend on Sascha Hauer
• [PATCH 1/6] media/video i.MX: use IMX_HAVE_PLATFORM_* macros Sascha Hauer
• [PATCH 6/6] mmc i.MX sdhci: use IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX to depend on Sascha Hauer
• hard coded value for idcode field in struct cpu_table Madhavi Manchala
  • hard coded value for idcode field in struct cpu_table Sławomir Cygan
    • hard coded value for idcode field in struct cpu_table Madhavi Manchala
      • hard coded value for idcode field in struct cpu_table Sławomir Cygan
• [PATCH 0/4] OMAP 3 and 4 i2c fixes Andy Green
  • [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access Andy Green
    • [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access Cousson, Benoit
      • [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access Andy Green
      • [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access Cousson, Benoit
      • [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access Andy Green
      • [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access Cousson, Benoit
    • [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access Cousson, Benoit
  • [PATCH 2/4] OMAP3 I2C document why cpu type and not peripheral unit ID used to probe Andy Green
    • [PATCH 2/4] OMAP3 I2C document why cpu type and not peripheral unit ID used to probe Cousson, Benoit
      • [PATCH 2/4] OMAP3 I2C document why cpu type and not peripheral unit ID used to probe Andy Green
  • [PATCH 3/4] OMAP3 and 4 i2c mark extended reg enums as extended only Andy Green
    • [PATCH 3/4] OMAP3 and 4 i2c mark extended reg enums as extended only Cousson, Benoit
      • [PATCH 3/4] OMAP3 and 4 i2c mark extended reg enums as extended only Andy Green
      • [PATCH 3/4] OMAP3 and 4 i2c mark extended reg enums as extended only Cousson, Benoit
  • [PATCH 4/4] OMAP3 and 4 I2C use cpu type consistently for new register availability Andy Green
    • [PATCH 4/4] OMAP3 and 4 I2C use cpu type consistently for new register availability Cousson, Benoit
  • [PATCH 0/4] OMAP 3 and 4 i2c fixes Cousson, Benoit
• [PATCH v2] ARM: mxs/mx28evk: add flexcan devices Shawn Guo
• [PATCH 0/7] Various Samsung updates Mark Brown
  • [PATCH 1/7] ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices Mark Brown
  • [PATCH 2/7] ARM: S3C64XX: Staticise non-exported GPIO to interrupt functions Mark Brown
  • [PATCH 3/7] ARM: S3C64XX: Add clock for i2c1 Mark Brown
  • [PATCH 4/7] ARM: S3C64XX: Tone down SDHCI debugging Mark Brown
  • [PATCH 5/7] ARM: S3C64XX: Reduce output of s3c64xx_dma_init1() Mark Brown
  • [PATCH 6/7] ARM: SMDK6410: Fix build with WM1190 disabled and WM1192 enabled Mark Brown
  • [PATCH 7/7] ARM: SMDK6410: Update regulator names for debugfs compatiblity Mark Brown
    • [PATCH 7/7] ARM: SMDK6410: Update regulator names for debugfs compatiblity Kukjin Kim
      • [PATCH 7/7] ARM: SMDK6410: Update regulator names for debugfs compatiblity Mark Brown
  • [PATCH 0/7] Various Samsung updates Ben Dooks
    • [PATCH 0/7] Various Samsung updates Kukjin Kim
• rmk out of action until further notice Russell King - ARM Linux
• [PATCH v3 0/3] OMAP: DSS2: Fix for DISPC core functional clock divider Raghuveer Murthy
  • [PATCH v3 2/3] OMAP: DSS2: Renaming register macro DISPC_DIVISOR(ch) Raghuveer Murthy
  • [PATCH v3 3/3] OMAP4: DSS2: Using dss_features to set independent core clock divider Raghuveer Murthy
  • [PATCH v3 0/3] OMAP: DSS2: Fix for DISPC core functional clock divider Tomi Valkeinen
• [PATCH v3 1/3] OMAP: DSS2: Adding dss_features for independent core clk divider Raghuveer Murthy
• Memory Compaction feature. Ralf Baechle
• [PATCH v9 0/1] Add PRUSS UIO driver support Pratheesh Gangadhar
  • [PATCH v9 1/1] PRUSS UIO driver support Pratheesh Gangadhar
    • [PATCH v9 1/1] PRUSS UIO driver support Arnd Bergmann
      • [PATCH v9 1/1] PRUSS UIO driver support TK, Pratheesh Gangadhar
      • [PATCH v9 1/1] PRUSS UIO driver support Thomas Gleixner
      • [PATCH v9 1/1] PRUSS UIO driver support Arnd Bergmann
      • [PATCH v9 1/1] PRUSS UIO driver support Thomas Gleixner
      • [PATCH v9 1/1] PRUSS UIO driver support TK, Pratheesh Gangadhar
• [GIT PULL] ux500,u300,nomadik core changes for 2.6.39 Linus Walleij
  • [GIT PULL] ux500,u300,nomadik core changes for 2.6.39 Russell King - ARM Linux
• [PATCH 0/3] OMAP: DMA: mstandby mode and runtime pm support Kevin Hilman
  • [PATCH 0/3] OMAP: DMA: mstandby mode and runtime pm support G, Manjunath Kondaiah
    • [PATCH 0/3] OMAP: DMA: mstandby mode and runtime pm support G, Manjunath Kondaiah
      • [PATCH 0/3] OMAP: DMA: mstandby mode and runtime pm support Kevin Hilman
      • [PATCH 0/3] OMAP: DMA: mstandby mode and runtime pm support G, Manjunath Kondaiah
• [PATCH V12 0/4] ptp: IEEE 1588 hardware clock support David Miller
• [PATCH] ARM: mxc91231: select MXC_AVIC Uwe Kleine-König
• [PATCH v2] ARM: mx51: Print silicon revision on boot Fabio Estevam
• [PATCH v3] ARM: mx51: Print silicon revision on boot Fabio Estevam
  • [PATCH v3] ARM: mx51: Print silicon revision on boot Richard Zhao
• [PATCH v2] OMAP2PLUS: Replace voltage values with Macros Nishanth Menon
  • [PATCH v2] OMAP2PLUS: Replace voltage values with Macros Menon, Nishanth
• [PATCH] omap3: cpuidle: Add description field to each C-state. Kevin Hilman
• [PATCH] ARM: Samsung: change suspend/resume code to depend on CONFIG_SUSPEND Kyungmin Park
  • [PATCH v2] ARM: Samsung: change suspend/resume code to depend on CONFIG_SUSPEND Marek Szyprowski
• [PATCH 1/2] ARM imx53: add pwm devices support Jason Chen
• Recall: [PATCH 1/2] ARM imx53: add pwm devices support Chen Jie-B02280
  • Recall: [PATCH 1/2] ARM imx53: add pwm devices support s.hauer at pengutronix.de
    • Recall: [PATCH 1/2] ARM imx53: add pwm devices support Chen Jie-B02280
  • Recall: [PATCH 1/2] ARM imx53: add pwm devices support Russell King - ARM Linux
• [PATCH] ARM: mx53/loco: add pwm backlight device Jason Chen
• [PATCH 1/2] ARM: imx5x: clean up ARCH_MX5X Shawn Guo
• [PATCH 0/2] add Samsung SoC based MIPI-DSI support. InKi Dae
• [PATCH v10 0/1] Add PRUSS UIO driver support Pratheesh Gangadhar
  • [PATCH v10 1/1] PRUSS UIO driver support Pratheesh Gangadhar
    • [PATCH v10 1/1] PRUSS UIO driver support Arnd Bergmann
    • [PATCH v10 1/1] PRUSS UIO driver support Hans J. Koch
      • [PATCH v10 1/1] PRUSS UIO driver support Nori, Sekhar
      • [PATCH v10 1/1] PRUSS UIO driver support Arnd Bergmann
      • [PATCH v10 1/1] PRUSS UIO driver support Greg KH
      • [PATCH v10 1/1] PRUSS UIO driver support Hans J. Koch
    • [PATCH v10 1/1] PRUSS UIO driver support Hans J. Koch
• [PATCH] Exynos4: Basic CPUidle support Kyungmin Park
• [PATCH] Exynos4: Remove meaningless REGULATOR config option Kyungmin Park
  • [PATCH] Exynos4: Remove meaningless REGULATOR config option Sergei Shtylyov
    • [PATCH] Exynos4: Remove meaningless REGULATOR config option Mark Brown
      • [PATCH] Exynos4: Remove meaningless REGULATOR config option Kukjin Kim
  • [PATCH] Exynos4: Remove meaningless REGULATOR config option Kukjin Kim
• [PATCH V2 0/3] ARM: S5P: Add HRT support for s5p series Sangbeom Kim
  • [PATCH V2 1/3] ARM: S5P: Add s5p_timer support for HRT Sangbeom Kim
    • [PATCH V2 1/3] ARM: S5P: Add s5p_timer support for HRT Kyungmin Park
      • [PATCH V2 1/3] ARM: S5P: Add s5p_timer support for HRT Sangbeom Kim
  • [PATCH V2 2/3] ARM: S5P: Update machine initialization for HRT Sangbeom Kim
  • [PATCH V2 3/3] ARM: S5P: Update defconfig for HRT support Sangbeom Kim
• staging: iio: ak8975: make gpio platdata mandatory Naveen Krishna Ch
  • staging: iio: ak8975: make gpio platdata mandatory Kyungmin Park
    • staging: iio: ak8975: make gpio platdata mandatory Naveen Krishna Ch
      • staging: iio: ak8975: make gpio platdata mandatory Russell King - ARM Linux
      • staging: iio: ak8975: make gpio platdata mandatory Naveen Krishna Ch
  • staging: iio: ak8975: make gpio platdata mandatory Sergei Shtylyov
• [PATCH] OMAP2/3: VENC hwmod: add OCPIF_SWSUP_IDLE flag to interface Paul Walmsley
  • [PATCH] OMAP2/3: VENC hwmod: add OCPIF_SWSUP_IDLE flag to interface Cousson, Benoit
• [PATCH] ARM: EXYNOS4: Adds Samsung NURI board support Kukjin Kim
• [PATCH] mmci: separate out ST Micro register defines Linus Walleij
  • [PATCH] mmci: separate out ST Micro register defines Sebastian RASMUSSEN
  • [PATCH] mmci: separate out ST Micro register defines Linus Walleij
• [PATCH/RFC 0/7] Samsung IOMMU videobuf2 allocator and s5p-fimc update Marek Szyprowski
  • [PATCH 2/7] ARM: S5PV310: power domains: fixes and code cleanup Marek Szyprowski
  • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Marek Szyprowski
    • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Marek Szyprowski
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Arnd Bergmann
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Marek Szyprowski
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Arnd Bergmann
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Marek Szyprowski
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Arnd Bergmann
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Marek Szyprowski
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Arnd Bergmann
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Marek Szyprowski
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Arnd Bergmann
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver KyongHo Cho
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Russell King - ARM Linux
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver InKi Dae
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Russell King - ARM Linux
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver daeinki
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Russell King - ARM Linux
      • [PATCH 3/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver Arnd Bergmann
  • [PATCH 4/7] v4l: videobuf2: add Samsung SYSMMU (IOMMU) based allocator Marek Szyprowski
  • [PATCH 5/7] s5p-fimc: add pm_runtime support Marek Szyprowski
  • [PATCH 6/7] s5p-fimc: Add support for vb2-s5p-iommu allocator Marek Szyprowski
  • [PATCH 7/7] ARM: S5PC210: enable FIMC on Universal_C210 Marek Szyprowski
  • [PATCH/RFC 0/7] Samsung IOMMU videobuf2 allocator and s5p-fimc update Kukjin Kim
    • [PATCH/RFC 0/7] Samsung IOMMU videobuf2 allocator and s5p-fimc update Marek Szyprowski
      • [PATCH/RFC 0/7] Samsung IOMMU videobuf2 allocator and s5p-fimc update InKi Dae
• [PATCH 1/7] ARM: S5PV310: Add platform definitions for FIMC Marek Szyprowski
  • [PATCH 1/7] ARM: S5PV310: Add platform definitions for FIMC Kukjin Kim
• [PATCH] dmaengine/dw_dmac fix: use readl & writel instead of __raw_readl & __raw_writel Viresh Kumar
• [PATCHv4 0/4] ARM: Fixing udelay() for SMP and non-SMP systems Linus Walleij
  • [PATCHv4 0/4] ARM: Fixing udelay() for SMP and non-SMP systems Saravana Kannan
• [PATCH] ARM: twd: Adjust localtimer frequency with cpufreq notifiers Linus Walleij
  • [PATCH] ARM: twd: Adjust localtimer frequency with cpufreq notifiers martin persson
    • [PATCH] ARM: twd: Adjust localtimer frequency with cpufreq notifiers Colin Cross
      • [PATCH] ARM: twd: Adjust localtimer frequency with cpufreq notifiers Rob Herring
      • [PATCH] ARM: twd: Adjust localtimer frequency with cpufreq notifiers Colin Cross
      • [PATCH] ARM: twd: Adjust localtimer frequency with cpufreqnotifiers Santosh Shilimkar
      • [PATCH] ARM: twd: Adjust localtimer frequency with cpufreqnotifiers Linus Walleij
      • [PATCH] ARM: twd: Adjust localtimer frequency withcpufreqnotifiers Santosh Shilimkar
      • [PATCH] ARM: twd: Adjust localtimer frequency withcpufreqnotifiers Colin Cross
      • [PATCH] ARM: twd: Adjust localtimer frequency withcpufreqnotifiers Linus Walleij
• [PATCH v2] ARM: Thumb-2: Add local symbols to work around gas behaviour Dave Martin
  • [PATCH v2] ARM: Thumb-2: Add local symbols to work around gas behaviour Nicolas Pitre
• CHROMIUM: arm: tegra: Add platfrom devices for Cypress trackpad (issue6623011) dudl at cypress.com
  • CHROMIUM: arm: tegra: Add platfrom devices for Cypress trackpad (issue6623011) Ben Dooks
    • CHROMIUM: arm: tegra: Add platfrom devices for Cypress trackpad (issue6623011) Dudley Du
• [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Rajendra Nayak
  • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Paul Walmsley
    • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Rajendra Nayak
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Kevin Hilman
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Paul Walmsley
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Paul Walmsley
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Rajendra Nayak
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Paul Walmsley
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Paul Walmsley
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Ben Dooks
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Paul Walmsley
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Paul Walmsley
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Rajendra Nayak
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Kevin Hilman
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Rajendra Nayak
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Rajendra Nayak
      • [PATCH] OMAP4: clockdomain: Follow recommended enable sequence Rajendra Nayak
• [PATCH] i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup Rajendra Nayak
  • [PATCH] i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup Kevin Hilman
    • [PATCH] i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup Ben Dooks
• [PATCH] ARM: fix compile error in tlb.h Linus Walleij
  • [PATCH] ARM: fix compile error in tlb.h Rob Herring
• [PATCH 0/2] OMAP: PM: implement devices wakeup latency constraints APIs Jean Pihet
  • [PATCH 2/2] OMAP: PM: implement devices constraints APIs Jean Pihet
    • [PATCH 2/2] OMAP: PM: implement devices constraints APIs Jean Pihet
      • [PATCH 2/2] OMAP: PM: implement devices constraints APIs Kevin Hilman
    • [PATCH 2/2] OMAP: PM: implement devices constraints APIs Paul Walmsley
      • [PATCH 2/2] OMAP: PM: implement devices constraints APIs Jean Pihet
      • [PATCH 2/2] OMAP: PM: implement devices constraints APIs Kevin Hilman
• [PATCH 1/2] OMAP PM: create a PM layer plugin for the devices wakeup latency constraints Jean Pihet
  • [PATCH 1/2] OMAP PM: create a PM layer plugin for the devices wakeup latency constraints Kevin Hilman
• [PATCH 2/2] OMAP: PM: implement devices wakeup latency constraints APIs Jean Pihet
  • [PATCH 2/2] OMAP: PM: implement devices wakeup latency constraints APIs Kevin Hilman
    • [PATCH 2/2] OMAP: PM: implement devices wakeup latency constraints APIs Jean Pihet
      • [PATCH 2/2] OMAP: PM: implement devices wakeup latency constraints APIs Kevin Hilman
• [PATCH 1/2] Revert "OMAP4: hwmod data: Prevent timer1 to be reset and idle during init" Benoit Cousson
• [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes Dave Martin
  • [PATCH v5 1/5] ARM: omap4: Provide do_wfi() for Thumb-2 Dave Martin
  • [PATCH v5 2/5] ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL Dave Martin
  • [PATCH v5 3/5] ARM: omap3: Remove hand-encoded SMC instructions Dave Martin
  • [PATCH v5 4/5] ARM: omap3: Thumb-2 compatibility for sram34xx.S Dave Martin
  • [PATCH v5 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S Dave Martin
  • [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes Dave Martin
    • [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes Santosh Shilimkar
      • [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes Tony Lindgren
      • [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes Dave Martin
      • [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes Kevin Hilman
      • [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes Nicolas Pitre
      • [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes Dave Martin
      • [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes Kevin Hilman
      • [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes Santosh Shilimkar
  • [PATCH v5 REPOST 0/5] ARM: omap[34]: Thumb-2 compatibility fixes Kevin Hilman
• [PATCH] MAINTAINERS: Update MSM maintainers Pavel Machek
  • [PATCH] MAINTAINERS: Update MSM maintainers David Brown
• [PATCH] ARM: mx51_efika: update platform data for new mfd changes Andres Salomon
  • [PATCH] ARM: mx51_efika: update platform data for new mfd changes Sergei Shtylyov
    • [PATCH] ARM: mx51_efika: update platform data for new mfd changes Andres Salomon
      • [PATCH] ARM: mx51_efika: update platform data for new mfd changes Sergei Shtylyov
      • [PATCH] ARM: mx51_efika: update platform data for new mfd changes Mark Brown
      • [PATCH] ARM: mx51_efika: update platform data for new mfd changes Andres Salomon
      • [PATCH] ARM: mx51_efika: update platform data for new mfd changes Uwe Kleine-König
  • [PATCH] ARM: mx51_efika: update platform data for new mfd changes Sascha Hauer
    • [PATCH] ARM: mx51_efika: update platform data for new mfd changes Samuel Ortiz
      • [PATCH] ARM: mx51_efika: update platform data for new mfd changes Sascha Hauer
• PXA270 Random Hangs at Low Core Freq Vasily Khoruzhick
  • PXA270 Random Hangs at Low Core Freq Michael Cashwell
    • PXA270 Random Hangs at Low Core Freq Vasily Khoruzhick
• [PATCH] [ARM] MX1: Add ARMadeus Systems APF9328 board support Gwenhael Goavec-Merou
  • [PATCH] [ARM] MX1: Add ARMadeus Systems APF9328 board support Sascha Hauer
• [PATCH 0/6] move mach-mx3/* to mach-imx Uwe Kleine-König
  • [PATCH 1/6] ARM: mxc91231: select MXC_AVIC Uwe Kleine-König
  • [PATCH 2/6] ARM: mx3: dynamically allocate "mxc_rtc" devices Uwe Kleine-König
  • [PATCH 3/6] ARM: mx3/pcm037: properly allocate memory for mx3-camera Uwe Kleine-König
  • [PATCH 4/6] ARM: mx3/mx31moboard: properly allocate memory for mx3-camera Uwe Kleine-König
    • [PATCH 4/6] ARM: mx3/mx31moboard: properly allocate memory for mx3-camera Philippe Rétornaz
  • [PATCH 5/6] [RFC] ARM: mx3: dynamically allocate "ipu-core" devices Uwe Kleine-König
  • [PATCH 6/6] ARM: imx: move mx3 support to mach-imx Uwe Kleine-König
• [PATCH 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile Sheetal Sahasrabudhe
  • [PATCH 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile Bryan Huntsman
    • [PATCH 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile Sheetal Sahasrabudhe
  • [PATCH 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile Jean Pihet
• [PATCH 1/3] msm: Add support for Scorpion and ScorpionMP PMU Sheetal Sahasrabudhe
  • [PATCH 1/3] msm: Add support for Scorpion and ScorpionMP PMU Trilok Soni
    • [PATCH 1/3] msm: Add support for Scorpion and ScorpionMP PMU Sheetal Sahasrabudhe
• [PATCH 2/3] [ARM] perfevents: Add support for Scorpion performance monitors Sheetal Sahasrabudhe
  • [PATCH 2/3] [ARM] perfevents: Add support for Scorpion performance monitors Will Deacon
• [PATCH 3/3] [ARM] Oprofile: Add Qualcomm Scorpion and ScorpionMP CPU type Sheetal Sahasrabudhe
• [PATCH] OMAP1: McBSP: fix build break for non-multi-OMAP1 configs Paul Walmsley
  • [PATCH] OMAP1: McBSP: fix build break for non-multi-OMAP1 configs Jarkko Nikula
    • [PATCH] OMAP1: McBSP: fix build break for non-multi-OMAP1 configs Paul Walmsley
      • [PATCH] OMAP1: McBSP: fix build break for non-multi-OMAP1 configs Tony Lindgren
• [PATCH 1/1] omap3: Save and restore CM_AUTOIDLE_PLL across off mode Paul Walmsley
  • [PATCH 1/1] omap3: Save and restore CM_AUTOIDLE_PLL across off mode Premi, Sanjeev
    • [PATCH 1/1] omap3: Save and restore CM_AUTOIDLE_PLL across off mode Vishwanath Sripathy
      • [PATCH 1/1] omap3: Save and restore CM_AUTOIDLE_PLL across off mode Paul Walmsley
• [PATCH v11 0/1] Add PRUSS UIO driver support Pratheesh Gangadhar
  • [PATCH v11 1/1] PRUSS UIO driver support Pratheesh Gangadhar
    • [PATCH v11 1/1] PRUSS UIO driver support Hans J. Koch
      • [PATCH v11 1/1] PRUSS UIO driver support Greg KH
• [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI Dinh.Nguyen at freescale.com
  • [PATCHv2 2/2] ARM: mx51: Add support for low power suspend on MX51 Dinh.Nguyen at freescale.com
    • [PATCHv2 2/2] ARM: mx51: Add support for low power suspend on MX51 Arnaud Patard (Rtp)
  • [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI Nguyen Dinh-R00091
    • [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI Arnaud Patard (Rtp)
      • [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI Nguyen Dinh-R00091
      • [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI Arnaud Patard (Rtp)
      • [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI Nguyen Dinh-R00091
      • [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI s.hauer at pengutronix.de
      • [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI Nguyen Dinh-R00091
      • [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI David Jander
      • [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI s.hauer at pengutronix.de
      • [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI David Jander
      • [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI Nguyen Dinh-R00091
  • [PATCHv2 1/2] ARM: mx51: Implement code to allow mx51 to enter WFI Nguyen Dinh-R00091
• [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver Kevin Hilman
  • [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver Govindraj
    • [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver Kevin Hilman
      • [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver Paul Walmsley
      • [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver Govindraj
      • [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver Govindraj
      • [PATCH 5/7] Serial: OMAP: add runtime pm support for omap-serial driver Kevin Hilman
• [PATCH 1/2] ARM: Add TS-7800 revisions 6-9 Michael Spang
  • [PATCH 2/2] ARM: Enable TS-78XX features in unknown revisions Michael Spang
    • [PATCH v2 2/2] ARM: Enable TS-78XX features in unknown revisions Michael Spang
    • [PATCH 2/2] ARM: Enable TS-78XX features in unknown revisions Sergei Shtylyov
  • [PATCH 1/2] ARM: Add TS-7800 revisions 6-9 Nicolas Pitre
• Tegra ASoC board patches for 2.6.39 Stephen Warren
• [PATCH 0/5] ARM: Tegra: Enable audio (boards-for-next-i2c) Stephen Warren
  • [PATCH 1/5] ARM: Tegra: Add devices.c entries for audio Stephen Warren
  • [PATCH 2/5] ARM: Tegra: Create defines for SD-related GPIO names Stephen Warren
  • [PATCH 3/5] ARM: tegra: Harmony: Beginnings of audio support Stephen Warren
  • [PATCH 4/5] ARM: tegra: Harmony: I2C-related portions of audio support Stephen Warren
  • [PATCH 5/5] ARM: tegra: Harmony: Set WM8903 gpio_base Stephen Warren
• [PATCH 0/3] ARM: Tegra: Enable audio (boards-for-next) Stephen Warren
  • [PATCH 2/3] ARM: Tegra: Create defines for SD-related GPIO names Stephen Warren
  • [PATCH 3/3] ARM: tegra: Harmony: Beginnings of audio support Stephen Warren
  • [PATCH 0/3] ARM: Tegra: Enable audio (boards-for-next) Olof Johansson
• [PATCH 1/3] ARM: Tegra: Add devices.c entries for audio Stephen Warren
• [PATCH V2 0/3]: OMAP4: Update OPP Table and Voltage Rail Values Shweta Gulati
  • [PATCH V2 0/3]: OMAP4: Update OPP Table and Voltage Rail Values Kevin Hilman
    • [PATCH V2 0/3]: OMAP4: Update OPP Table and Voltage Rail Values Nishanth Menon
• [PATCH V2 1/3] OMAP4: Enable 800 MHz and 1 GHz MPU-OPP Shweta Gulati
  • [PATCH V2 1/3] OMAP4: Enable 800 MHz and 1 GHz MPU-OPP Nishanth Menon
• [PATCH V2 2/3] OMAP4: Update Voltage Rail Values for MPU/IVA Shweta Gulati
  • [PATCH V2 2/3] OMAP4: Update Voltage Rail Values for MPU/IVA Nishanth Menon
• [PATCH V2 3/3] OMAP4: Add IVA OPP enteries. Shweta Gulati
  • [PATCH V2 3/3] OMAP4: Add IVA OPP enteries. Nishanth Menon
• [PATCH v3] OMAP3+: OPP: Replace voltage values with Macros Nishanth Menon
  • [PATCH v3] OMAP3+: OPP: Replace voltage values with Macros Kevin Hilman
    • [PATCH v3] OMAP3+: OPP: Replace voltage values with Macros Nishanth Menon
• [PATCH v2 2/2] ARM: Enable TS-78XX features in unknown revisions Alexander Clouter
• [PATCH] [ARM] orion5x: use safer FPGA ID 'default' for TS-78xx Alexander Clouter
  • [PATCH] [ARM] orion5x: use safer FPGA ID 'default' for TS-78xx Alexander Clouter
  • [PATCHv2] [ARM] orion5x: use safer FPGA ID 'default' for TS-78xx Alexander Clouter
    • [PATCHv2] [ARM] orion5x: use safer FPGA ID 'default' for TS-78xx Nicolas Pitre
• [PATCH] [ARM] orion5x: fix compiler cast warnings in ts78xx-setup.c Alexander Clouter
  • [PATCH] [ARM] orion5x: fix compiler cast warnings in ts78xx-setup.c Sergei Shtylyov
• [PATCH V3 00/19] OMAP3+: PM: introduce SR class 1.5 Nishanth Menon
  • [PATCH V3 01/19] OMAP3: hwmod: add SmartReflex IRQs Nishanth Menon
    • [PATCH V3 01/19] OMAP3: hwmod: add SmartReflex IRQs Kevin Hilman
  • [PATCH V3 02/19] OMAP3+: voltage: fix build warning Nishanth Menon
    • [PATCH V3 02/19] OMAP3+: voltage: fix build warning Kevin Hilman
  • [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage Nishanth Menon
    • [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage Sergei Shtylyov
      • [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage Nishanth Menon
      • [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage Sergei Shtylyov
      • [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage Nishanth Menon
    • [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage Kevin Hilman
  • [PATCH V3 04/19] OMAP3+: voltage: remove spurious pr_notice for debugfs Nishanth Menon
    • [PATCH V3 04/19] OMAP3+: voltage: remove spurious pr_notice for debugfs Kevin Hilman
  • [PATCH V3 05/19] OMAP3+: voltage: use IS_ERR_OR_NULL Nishanth Menon
    • [PATCH V3 05/19] OMAP3+: voltage: use IS_ERR_OR_NULL David Cohen
      • [PATCH V3 05/19] OMAP3+: voltage: use IS_ERR_OR_NULL Nishanth Menon
      • [PATCH V3 05/19] OMAP3+: voltage: use IS_ERR_OR_NULL Russell King - ARM Linux
      • [PATCH V3 05/19] OMAP3+: voltage: use IS_ERR_OR_NULL Nishanth Menon
  • [PATCH V3 06/19] OMAP3+: voltage: use volt_data pointer instead values Nishanth Menon
    • [PATCH V3 06/19] OMAP3+: voltage: use volt_data pointer instead values Kevin Hilman
  • [PATCH V3 07/19] OMAP3+: voltage: add transdone APIs Nishanth Menon
    • [PATCH V3 07/19] OMAP3+: voltage: add transdone APIs Kevin Hilman
  • [PATCH V3 08/19] OMAP3+: SR: make notify independent of class Nishanth Menon
    • [PATCH V3 08/19] OMAP3+: SR: make notify independent of class Kevin Hilman
  • [PATCH V3 09/19] OMAP3+: SR: disable interrupt by default Nishanth Menon
    • [PATCH V3 09/19] OMAP3+: SR: disable interrupt by default Kevin Hilman
  • [PATCH V3 10/19] OMAP3+: SR: enable/disable SR only on need Nishanth Menon
    • [PATCH V3 10/19] OMAP3+: SR: enable/disable SR only on need Kevin Hilman
  • [PATCH V3 11/19] OMAP3+: SR: fix cosmetic indentation Nishanth Menon
    • [PATCH V3 11/19] OMAP3+: SR: fix cosmetic indentation Kevin Hilman
      • [PATCH V3 11/19] OMAP3+: SR: fix cosmetic indentation Aaro Koskinen
      • [PATCH V3 11/19] OMAP3+: SR: fix cosmetic indentation Kevin Hilman
  • [PATCH V3 12/19] OMAP3+: SR: introduce class start, stop and priv data Nishanth Menon
    • [PATCH V3 12/19] OMAP3+: SR: introduce class start, stop and priv data Kevin Hilman
  • [PATCH V3 13/19] OMAP3+: SR: Reuse sr_[start|stop]_vddautocomp functions Nishanth Menon
    • [PATCH V3 13/19] OMAP3+: SR: Reuse sr_[start|stop]_vddautocomp functions Jarkko Nikula
    • [PATCH V3 13/19] OMAP3+: SR: Reuse sr_[start|stop]_vddautocomp functions Kevin Hilman
  • [PATCH V3 14/19] OMAP3+: SR: introduce notifiers flags Nishanth Menon
    • [PATCH V3 14/19] OMAP3+: SR: introduce notifiers flags Kevin Hilman
  • [PATCH V3 15/19] OMAP3+: SR: introduce notifier_control Nishanth Menon
    • [PATCH V3 15/19] OMAP3+: SR: introduce notifier_control Kevin Hilman
  • [PATCH V3 16/19] OMAP3+: SR: disable spamming interrupts Nishanth Menon
  • [PATCH V3 17/19] OMAP3+: SR: make enable path use volt_data pointer Nishanth Menon
    • [PATCH V3 17/19] OMAP3+: SR: make enable path use volt_data pointer Kevin Hilman
  • [PATCH V3 18/19] OMAP3630+: SR: add support for class 1.5 Nishanth Menon
    • [PATCH V3 18/19] OMAP3630+: SR: add support for class 1.5 Kevin Hilman
  • [PATCH V3 19/19] OMAP3430: SR: class3: restrict CPU to run on Nishanth Menon
    • [PATCH V3 19/19] OMAP3430: SR: class3: restrict CPU to run on Kevin Hilman
• A few mxsfb patches Shawn Guo
  • [PATCH 1/3] video: mxsfb: smarten the code a little bit Shawn Guo
    • [PATCH 1/3] video: mxsfb: smarten the code a little bit Arnd Bergmann
      • [PATCH 1/3] video: mxsfb: smarten the code a little bit Shawn Guo
      • [PATCH 1/3] video: mxsfb: smarten the code a little bit Shawn Guo
    • [PATCH 1/3 RESEND] video: mxsfb: smarten the code a little bit Shawn Guo
  • [PATCH 2/3] video: mxsfb: fix the incorrect error checking for alloc_pages_exact Shawn Guo
  • [PATCH 3/3] video: mxsfb: add DOTCLK polarity configuration support Shawn Guo
  • A few mxsfb patches Sascha Hauer
    • A few mxsfb patches Shawn Guo
• [PATCH] ARM: mxs/tx28: fix up LCD pads Shawn Guo
  • [PATCH] ARM: mxs/tx28: fix up LCD pads Sascha Hauer
  • [PATCH] ARM: mxs/tx28: fix up LCD pads Lothar Waßmann
    • [PATCH] ARM: mxs/tx28: fix up LCD pads Shawn Guo
      • [PATCH] ARM: mxs/tx28: fix up LCD pads Lothar Waßmann
      • [PATCH] ARM: mxs/tx28: fix up LCD pads Shawn Guo
• [PATCH 0/4] Add framebuffer device for mx28evk and mx23evk boards Shawn Guo
  • [PATCH 1/4] ARM: mxs: add helper macro for pad control Shawn Guo
  • [PATCH 2/4] ARM: mxs/mx28evk: add framebuffer device Shawn Guo
    • [PATCH 2/4] ARM: mxs/mx28evk: add framebuffer deviceg Sascha Hauer
      • [PATCH 2/4] ARM: mxs/mx28evk: add framebuffer deviceg Shawn Guo
  • [PATCH 3/4] ARM: mxs: fix typo "GPO" in iomux-mx23.h Shawn Guo
  • [PATCH 4/4] ARM: mxs/mx23evk: add framebuffer device Shawn Guo
  • [PATCH 0/4] Add framebuffer device for mx28evk and mx23evk boards Sascha Hauer
    • [PATCH 0/4] Add framebuffer device for mx28evk and mx23evk boards Shawn Guo
      • [PATCH 0/4] Add framebuffer device for mx28evk and mx23evk boards Sascha Hauer
    • [PATCH 0/4] Add framebuffer device for mx28evk and mx23evk boards Shawn Guo
• [PATCH v2 2/2] ARM: Enable TS-78XX features in unknown revisions Nicolas Pitre
• [PATCH v2 2/2] ARM: Enable TS-78XX features in unknown revisions Michael Spang
• [PATCH v2 1/3] ARM: PXA: PXAFB: Fix double-free issue Vasily Khoruzhick
  • [PATCH 1/4] ARM: PXA: PXAFB: rework pxafb overlay memory management Vasily Khoruzhick
    • [PATCH 2/4] ARM: PXA: PXAFB: Fix plane Z-ordering problem Vasily Khoruzhick
      • [PATCH 2/4] ARM: PXA: PXAFB: Fix plane Z-ordering problem Eric Miao
    • [PATCH 3/4] ARM: PXA: PXAFB: Fix typo in ypos assignment Vasily Khoruzhick
      • [PATCH 3/4] ARM: PXA: PXAFB: Fix typo in ypos assignment Marek Vasut
      • [PATCH 3/4] ARM: PXA: PXAFB: Fix typo in ypos assignment Eric Miao
    • [PATCH 4/4] ARM: PXA: PXAFB: don't disable controller on cpufreq transition if overlay is in use Vasily Khoruzhick
      • [PATCH 4/4] ARM: PXA: PXAFB: don't disable controller on cpufreq transition if overlay is in use Eric Miao
    • [PATCH 1/4] ARM: PXA: PXAFB: rework pxafb overlay memory management Marek Vasut
      • [PATCH 1/4] ARM: PXA: PXAFB: rework pxafb overlay memory management Vasily Khoruzhick
      • [PATCH 1/4] ARM: PXA: PXAFB: rework pxafb overlay memory management Eric Miao
• Git pull request: Orion/Kirkwood updates for next merge window Nicolas Pitre
• [PATCH] ARM: orion5x: replace printk with pr_{err,info,...} in ts78xx-setup.c Alexander Clouter
  • [PATCH] ARM: orion5x: replace printk with pr_{err,info,...} in ts78xx-setup.c Joe Perches
• [PATCH 0/2] ARM: tegra: Add Toshiba AC100 support Marc Dietrich
  • [PATCH 1/2] Add initial support for the Toshiba AC100/Dynabook AZ netbook Marc Dietrich
    • [PATCH 1/2] Add initial support for the Toshiba AC100/Dynabook AZ netbook Colin Cross
    • [PATCH 1/2] Add initial support for the Toshiba AC100/Dynabook AZ netbook Olof Johansson
      • [PATCH 1/2] Add initial support for the Toshiba AC100/Dynabook AZ netbook Marc Dietrich
  • [PATCH 2/2] Add a default config for PAZ00 Marc Dietrich
    • [PATCH 2/2] Add a default config for PAZ00 Colin Cross
      • [PATCH 2/2] Add a default config for PAZ00 Olof Johansson
• [PATCH 0/4] Continue the mx31_3ds machine support Alberto Panizzo
  • [PATCH 1/4] spi_imx: Fix misspelled configuration variable SOC_IMX31 Alberto Panizzo
    • [PATCH 1/4] spi_imx: Fix misspelled configuration variable SOC_IMX31 Uwe Kleine-König
  • [PATCH 2/4] mach-mx31_3ds: Add support for the MMC slot of the personality board Alberto Panizzo
    • [PATCH 2/4] mach-mx31_3ds: Add support for the MMC slot of the personality board Sascha Hauer
      • [PATCH 2/4] mach-mx31_3ds: Add support for the MMC slot of the personality board Alberto Panizzo
  • [PATCH 3/4] mach-mx31_3ds: Add support for framebuffer and LCD Alberto Panizzo
  • [PATCH 4/4] mx31_3ds: Add support for the camera device on the personality board Alberto Panizzo
    • [PATCH 4/4] mx31_3ds: Add support for the camera device on the personality board Uwe Kleine-König
• [PATCH] [ARM] tlb: fix build error with CONFIG_SWAP=n Dmitry Eremin-Solenikov
  • [PATCH] [ARM] tlb: fix build error with CONFIG_SWAP=n Russell King - ARM Linux
• [PATCH v2 0/2] ARM: tegra: Add Toshiba AC100 support Marc Dietrich
• [PATCH V3 0/3] ARM: S5P: Add HRT support for s5p series Sangbeom Kim
  • [PATCH 1/3] This patch adds support HR-Timer(High Resolution Timer) and dynamic tick system for S5P SoCs. There are many clock sources for HR-Timer on S5P SoCs. The PWM timer, RTC, System Timer, and MCT can be used for clock source. This patch can only support PWM timer for clocksource of S5P64x0 and S5PV210. Sangbeom Kim
    • [PATCH 1/3] This patch adds support HR-Timer(High Resolution Timer) and dynamic tick system for S5P SoCs. There are many clock sources for HR-Timer on S5P SoCs. The PWM timer, RTC, System Timer, and MCT can be used for clock source. This patch can only support PWM timer for clocksource of S5P64x0 and S5PV210. Russell King - ARM Linux
      • [PATCH 1/3] This patch adds support HR-Timer(High Resolution Timer) and dynamic tick system for S5P SoCs. There are many clock sources for HR-Timer on S5P SoCs. The PWM timer, RTC, System Timer, and MCT can be used for clock source. This patch can onl Kukjin Kim
  • [PATCH 2/3] This patch modify s5pv210_defconfig and s5p64x0_defconfig for High resolution timer support. Sangbeom Kim
  • [PATCH 3/3] This patch update mach-s5p64x0 and mach-s5pv210 machine initialization for hrt support. S5P_HRT is added and applied in s5pv210, s5p64x0 machines. PWM Timer3 is used for default clockevent. PWM Timer4 is used for defualt clocksource. Sangbeom Kim
• [PATCH v2] ARM: EXYNOS4: enabled lcd and backlight in NURI board Donghwa Lee
  • [PATCH v2] ARM: EXYNOS4: enabled lcd and backlight in NURI board Kukjin Kim
    • [PATCH v2] ARM: EXYNOS4: enabled lcd and backlight in NURI board Donghwa Lee
• [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU KyongHo Cho
  • [PATCH 1/2] ARM: EXYNOS4: Enhancement of System MMU driver KyongHo Cho
  • [PATCH 2/2] ARM: EXYNOS4: Implement Clock gating for System MMU KyongHo Cho
  • [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU Marek Szyprowski
    • [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU KyongHo Cho
      • [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU Marek Szyprowski
      • [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU KyongHo Cho
  • [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU Kukjin Kim
    • [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU Kyungmin Park
      • [PATCH 0/2] ARM: EXYNOS4: Enhancement of System MMU Kukjin Kim
• [PATCH v3] serial: msm_serial_hs: Add MSM high speed UART driver Mayank Rana
  • [PATCH v3] serial: msm_serial_hs: Add MSM high speed UART driver Mayank Rana
• [PATCH v3] serial: msm_serial_hs: Add MSM high speed UART driver Mayank Rana
• [PATCH 1/2] [ARM] am200epd: fix resource leak in am200_init_gpio_regs error path Axel Lin
  • [PATCH 2/2] [ARM] am300epd: fix resource leak in am300_init_gpio_regs error path Axel Lin
    • [PATCH 2/2] [ARM] am300epd: fix resource leak in am300_init_gpio_regs error path Eric Miao
  • [PATCH 1/2] [ARM] am200epd: fix resource leak in am200_init_gpio_regs error path Eric Miao
• [PATCH 08/09] ARM: s3c2440: gta02: Request usb pullup pin before using it Kukjin Kim
• [PATCH 08/09] ARM: s3c2440: gta02: Request usb pullup pin before using it Lars-Peter Clausen
• [PATCH 1/2] USB: s3c2410_udc: Add common implementation for GPIO controlled pullups Lars-Peter Clausen
  • [PATCH 2/2] ARM: s3c24xx: Switch to common GPIO controlled UDC pullup implementation Lars-Peter Clausen
    • [PATCH 2/2] ARM: s3c24xx: Switch to common GPIO controlled UDC pullup implementation Vasily Khoruzhick
• [PATCH v2 0/4] OMAP: iommu: hwmod support and runtime PM Omar Ramirez Luna
  • [PATCH v2 1/4] OMAP3: hwmod data: add mmu data for iva and isp Omar Ramirez Luna
  • [PATCH v2 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp Omar Ramirez Luna
    • [PATCH v2 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp Cousson, Benoit
      • [PATCH v2 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp Ramirez Luna, Omar
      • [PATCH v2 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp Cousson, Benoit
      • [PATCH v2 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp Ramirez Luna, Omar
  • [PATCH v2 3/4] OMAP3/4: iommu: migrate to hwmod framework Omar Ramirez Luna
  • [PATCH v2 4/4] OMAP3/4: iommu: adapt to runtime pm Omar Ramirez Luna
• [PATCH 0/3] Tegra i2c board changes + defconfig update Olof Johansson
  • [PATCH 1/3] ARM: tegra: seaboard: register i2c devices Olof Johansson
    • [PATCH 1/3] ARM: tegra: seaboard: register i2c devices Stephen Warren
      • [PATCH 1/3] ARM: tegra: seaboard: register i2c devices Olof Johansson
      • [PATCH 1/3] ARM: tegra: seaboard: register i2c devices Stephen Warren
      • [PATCH 1/3] ARM: tegra: seaboard: register i2c devices Olof Johansson
  • [PATCH 2/3] ARM: tegra: harmony: register i2c devices Olof Johansson
    • [PATCH 2/3] ARM: tegra: harmony: register i2c devices Sergei Shtylyov
    • [PATCH 2/3] ARM: tegra: harmony: register i2c devices Stephen Warren
  • [PATCH 3/3] ARM: tegra: enable new drivers in defconfig Olof Johansson
    • [PATCH 3/3] ARM: tegra: enable new drivers in defconfig Stephen Warren
      • [PATCH 3/3] ARM: tegra: enable new drivers in defconfig Olof Johansson
      • [PATCH 3/3] ARM: tegra: enable new drivers in defconfig Stephen Warren
  • [PATCH 0/3] Tegra i2c board changes + defconfig update Colin Cross
    • [PATCH 0/3] Tegra i2c board changes + defconfig update Mark Brown
      • [PATCH 0/3] Tegra i2c board changes + defconfig update Colin Cross
      • [PATCH 0/3] Tegra i2c board changes + defconfig update Olof Johansson
• [PATCH v3] ARM: EXYNOS4: enabled lcd and backlight in NURI board Donghwa Lee
  • [PATCH v3] ARM: EXYNOS4: enabled lcd and backlight in NURI board Kukjin Kim
• ALSA issue on DA850/OMAP-L138/AM18x Christophe Aeschlimann
  • ALSA issue on DA850/OMAP-L138/AM18x Rajashekhara, Sudhakar
    • ALSA issue on DA850/OMAP-L138/AM18x Christophe Aeschlimann
      • ALSA issue on DA850/OMAP-L138/AM18x Christophe Aeschlimann
      • ALSA issue on DA850/OMAP-L138/AM18x Bedia, Vaibhav
      • ALSA issue on DA850/OMAP-L138/AM18x Christophe Aeschlimann
      • ALSA issue on DA850/OMAP-L138/AM18x Bedia, Vaibhav
• [PATCH 1/2] mtd: nand: Allow NAND chip ids to be included standalone. Artem Bityutskiy
• [PATCHv2 0/4] Continue the mx31_3ds machine support Alberto Panizzo
  • [PATCH 1/4] spi_imx: Fix misspelled configuration variable SOC_IMX31 Alberto Panizzo
    • [PATCHv2 1/4] spi_imx: Fix misspelled configuration variable SOC_IMX31 Alberto Panizzo
  • [PATCHv2 2/4] mach-mx31_3ds: Add support for the MMC slot of the personality board Alberto Panizzo
    • [PATCHv2 2/4] mach-mx31_3ds: Add support for the MMC slot of the personality board Marc Kleine-Budde
  • [PATCHv2 3/4] mach-mx31_3ds: Add support for framebuffer and LCD Alberto Panizzo
    • [PATCHv2 3/4] mach-mx31_3ds: Add support for framebuffer and LCD Marc Kleine-Budde
  • [PATCHv2 4/4] mach-mx31_3ds: Add support for the camera device on the personality board Alberto Panizzo
  • [PATCHv2 0/4] Continue the mx31_3ds machine support Marc Kleine-Budde
    • [PATCHv3 0/4] Continue the mx31_3ds machine support Alberto Panizzo
      • [PATCHv3 1/4] spi_imx: Fix misspelled configuration variable SOC_IMX31 Alberto Panizzo
      • [PATCHv3 2/4] mach-mx31_3ds: Add support for the MMC slot of the personality board Alberto Panizzo
      • [PATCHv3 3/4] mach-mx31_3ds: Add support for framebuffer and LCD Alberto Panizzo
      • [PATCHv3 4/4] mach-mx31_3ds: Add support for the camera device on the personality board Alberto Panizzo
• [PATCH] ARM: imx/mx25: fix (again) spi device registration typo Baruch Siach
• [PATCH 1/2] ARM: fix compiling error due to debug_info change Bryan Wu
  • [PATCH 1/2] ARM: fix compiling error due to debug_info change Will Deacon
• [PATCH] ARM: imx: Add tlv320aic32x4 board specific code to Visstrim_M10. Javier Martin
  • [PATCH] ARM: imx: Add tlv320aic32x4 board specific code to Visstrim_M10. Mark Brown
    • [PATCH] ARM: imx: Add tlv320aic32x4 board specific code to Visstrim_M10. javier Martin
• [PATCH 1/2] ARM: l2x0: Errata fix for flush by Way operationcan cause data corruption Will Deacon
  • [PATCH 1/2] ARM: l2x0: Errata fix for flush by Wayoperationcan cause data corruption Santosh Shilimkar
    • [PATCH 1/2] ARM: l2x0: Errata fix for flush by Wayoperationcan cause data corruption Russell King - ARM Linux
      • [PATCH 1/2] ARM: l2x0: Errata fix for flush by Wayoperationcancause data corruption Santosh Shilimkar
• [PATCH] ARM: imx/mx25: dynamically allocate pwm devices Baruch Siach
• [PATCH v1 1/1] davinci: macro rename DA8XX_LPSC0_DMAX to DA8XX_LPSC0_PRUSS. Subhasish Ghosh
• Question about free_pgd_slow ? Rabin Vincent
  • Question about free_pgd_slow ? rocky
• [PATCH] ARM: tegra: trimslice: enable MMC/SD slots Mike Rapoport
  • [PATCH] ARM: tegra: trimslice: enable MMC/SD slots Stephen Warren
• [PATCH] msm: gpio-v2: Add missing BIT field macros for interrupt control Rohit Vaswani
  • [PATCH] msm: gpio-v2: Add missing BIT field macros for interrupt control David Brown
• [PATCHv2 1/3] msm: Remove arch-specific gpiomux tables Rohit Vaswani
• [PATCHv2 2/3] msm: gpiomux: decentralize and modularize gpiomux init. Rohit Vaswani
• [PATCHv2 3/3] msm: gpiomux: Remove GPIOMUX_VALID and merge config enums Rohit Vaswani
• [GIT PULL] Remaining omap fixes for 2.6.37-r7 Tony Lindgren
• [PATCH v2 0/2] ARM: tegra: Add Toshiba AC100 support Marc Dietrich
  • [PATCH v2 1/2] Add initial support for the Toshiba AC100/Dynabook AZ netbook Marc Dietrich
    • [PATCH v2 1/2] Add initial support for the Toshiba AC100/Dynabook AZ netbook Olof Johansson
  • [PATCH v2 2/2] Add PAZ00 to tegra_defconfig Marc Dietrich
• [PATCH v2 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile Sheetal Sahasrabudhe
  • [PATCH v2 0/3] ARM: Add Scorpion/ScorpionMP support to perf and Oprofile Robert Richter
• [PATCH v2 1/3] msm: Add support for Scorpion and ScorpionMP PMU Sheetal Sahasrabudhe
• [PATCH v2 2/3] [ARM] perfevents: Add support for Scorpion performance monitors Sheetal Sahasrabudhe
  • [PATCH v2 2/3] [ARM] perfevents: Add support for Scorpion performance monitors Will Deacon
    • [PATCH v2 2/3] [ARM] perfevents: Add support for Scorpion performance monitors Sheetal Sahasrabudhe
• [PATCH v2 3/3] [ARM] Oprofile: Add Qualcomm Scorpion and ScorpionMP CPU type Sheetal Sahasrabudhe
• [GIT PULL] Samsung fixes for 2.6.38-rc8 Kukjin Kim
  • [GIT PULL] Samsung fixes for 2.6.38-rc8 Kyungmin Park
• [PATCH v2] ARM: tegra: seaboard: register i2c devices Olof Johansson
  • [PATCH v2] ARM: tegra: seaboard: register i2c devices Stephen Warren
    • [PATCH v2] ARM: tegra: seaboard: register i2c devices Olof Johansson
• [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone. Murali Nalajala
  • [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone. Artem Bityutskiy
    • [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone. Murali Nalajala
      • [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone. Murali Nalajala
      • [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone. Artem Bityutskiy
      • [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone. Murali Nalajala
      • [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone. Murali Nalajala
      • [PATCH V2 1/2] mtd: nand: Allow NAND chip ids to be included standalone. Artem Bityutskiy
• [PATCH 0/3] OMAP2+: powerdomain: add fn to determine whether pwrdm is always on Paul Walmsley
  • [PATCH 2/3] OMAP2+: powerdomain: fix bank power state bitfields Paul Walmsley
• [PATCH 1/3] OMAP2/3: WKUP powerdomain: mark as being always on Paul Walmsley
• [PATCH 3/3] OMAP2+: powerdomain: add pwrdm_can_ever_lose_context() Paul Walmsley
  • [PATCH 3/3] OMAP2+: powerdomain: add pwrdm_can_ever_lose_context() Varadarajan, Charulatha
    • [PATCH 3/3] OMAP2+: powerdomain: add pwrdm_can_ever_lose_context() Paul Walmsley
      • [PATCH 3/3] OMAP2+: powerdomain: add pwrdm_can_ever_lose_context() Varadarajan, Charulatha
• [PATCH] Exynos4: Add HSMMC channel 4 support Kyungmin Park
  • [PATCH] Exynos4: Add HSMMC channel 4 support Kukjin Kim
    • [PATCH] Exynos4: Add HSMMC channel 4 support Kyungmin Park
      • [PATCH] Exynos4: Add HSMMC channel 4 support Kukjin Kim
• [PATCH V6 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS Richard Zhu
  • [PATCH V6 2/4] mmc: add the abort CMDTYE bits definition Richard Zhu
  • [PATCH V6 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs Richard Zhu
• [PATCH V6 4/4] mmc: sdhci-esdhc: enable esdhc on imx53 Richard Zhu
• [PATCH 0/5] OMAP2+: hwmod: miscellaneous fixes for 2.6.39 Paul Walmsley
  • [PATCH 1/5] OMAP2+: hwmod: fix incorrect computation of autoidle_mask Paul Walmsley
  • [PATCH 2/5] omap: hwmod: add syss reset done flags to omap2, omap3 hwmods Paul Walmsley
  • [PATCH 3/5] OMAP2+: hwmod: Fix what _init_clock returns Paul Walmsley
  • [PATCH 4/5] OMAP2+: hwmod: fix a documentation bug with HWMOD_NO_OCP_AUTOIDLE Paul Walmsley
  • [PATCH 5/5] OMAP2+: hwmod: use status bit info for reset line Paul Walmsley
• [Qualcomm PM8921 MFD v2 0/6] pmic 8921 core and subdevices adharmap at codeaurora.org
  • [Qualcomm PM8921 MFD v2 1/6] mfd: pm8921: Add PMIC 8921 core driver adharmap at codeaurora.org
  • [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support adharmap at codeaurora.org
  • [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver adharmap at codeaurora.org
  • [Qualcomm PM8921 MFD v2 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver adharmap at codeaurora.org
  • [Qualcomm PM8921 MFD v2 5/6] MAINTAINERS: Add patterns for pmic 8921 files to MSM subsystem adharmap at codeaurora.org
  • [Qualcomm PM8921 MFD v2 6/6] msm: board-8960: Add support for pm8921 adharmap at codeaurora.org
• [PATCH 2/2] ARM: remove the 4x expansion presumption while decompressing the kernel Jean-Christophe PLAGNIOL-VILLARD
• MMC quirks relating to performance/lifetime. Pavel Machek
  • MMC quirks relating to performance/lifetime. Arnd Bergmann
• Amba CLCD register definitions Michael Hunold
  • Amba CLCD register definitions Russell King - ARM Linux
    • Amba CLCD register definitions Michael Hunold
• [GIT PULL]: TrimSlice update Mike Rapoport
• [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator Linus Walleij
  • [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator Mark Brown
• SMP soft lockup on smp_call_function_many when doing flush_tlb_page saeed bishara
  • SMP soft lockup on smp_call_function_many when doing flush_tlb_page Catalin Marinas
    • SMP soft lockup on smp_call_function_many when doing flush_tlb_page saeed bishara
      • SMP soft lockup on smp_call_function_many when doing flush_tlb_page saeed bishara
      • SMP soft lockup on smp_call_function_many when doing flush_tlb_page Catalin Marinas
      • SMP soft lockup on smp_call_function_many when doing flush_tlb_page saeed bishara
      • SMP soft lockup on smp_call_function_many when doing flush_tlb_page Catalin Marinas
• [PATCH 1/2] ARM: mx28: set proper parent for lcdif clock Shawn Guo
• [PATCH 2/2] ARM: mxs/mx28evk: add framebuffer device Shawn Guo
• [PATCH] ARM: aout-core: zero thread debug registers in a.out core dump Will Deacon
  • [PATCH] ARM: aout-core: zero thread debug registers in a.out core dump Bryan Wu
    • [PATCH] ARM: aout-core: zero thread debug registers in a.out core dump Will Deacon
• [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver Andy Green
  • [PATCH 2 01/18] I2C: OMAP2+: Set hwmod flags to only allow 16-bit accesses to i2c Andy Green
    • [PATCH 2 01/18] I2C: OMAP2+: Set hwmod flags to only allow 16-bit accesses to i2c Cousson, Benoit
    • [PATCH 2 01/18] I2C: OMAP2+: Set hwmod flags to only allow 16-bit accesses to i2c Paul Walmsley
  • [PATCH 2 02/18] I2C: OMAP2+: Name registers in I2C IP V2 only accordingly Andy Green
  • [PATCH 2 03/18] I2C: OMAP2+: Introduce I2C IP versioning constants Andy Green
  • [PATCH 2 04/18] I2C: OMAP2+: Tag all OMAP2+ hwmod defintions with I2C IP revision Andy Green
    • [PATCH 2 04/18] I2C: OMAP2+: Tag all OMAP2+ hwmod defintions with I2C IP revision Cousson, Benoit
  • [PATCH 2 05/18] I2C: OMAP: add rev to omap i2c platform data Andy Green
  • [PATCH 2 06/18] I2C: OMAP1: set IP revision in platform data Andy Green
  • [PATCH 2 07/18] I2C: OMAP2+: Pass hwmod rev knowledge via platform_data when i2c bus added Andy Green
  • [PATCH 2 08/18] I2C: OMAP2+: use platform_data ip revision to select register map Andy Green
  • [PATCH 2 09/18] I2C: OMAP2+: Solve array bounds overflow error on i2c idle Andy Green
  • [PATCH 2 10/18] I2C: OMAP2+: address confused probed version naming Andy Green
  • [PATCH 2 11/18] I2C: OMAP2+: increase omap_i2c_dev_attr flags from u8 to u32 Andy Green
  • [PATCH 2 12/18] I2C: OMAP1/OMAP2+: add flags field to omap i2c platform data Andy Green
  • [PATCH 2 13/18] I2C: OMAP2+: Pass flags up to omap i2c platform_data as well Andy Green
  • [PATCH 2 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test Andy Green
    • [PATCH 2 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test Krishnamoorthy, Balaji T
  • [PATCH 2 15/18] I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr Andy Green
    • [PATCH 2 15/18] I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr Cousson, Benoit
      • [PATCH 2 15/18] I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr Andy Green
      • [PATCH 2 15/18] I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr Cousson, Benoit
  • [PATCH 2 16/18] I2C: OMAP1: set i2c unit feature implementation flags in platform data Andy Green
  • [PATCH 2 17/18] I2C: OMAP2+: Convert omap I2C driver to use feature implementation flags from platform data Andy Green
  • [PATCH 2 18/18] I2C: OMAP1/OMAP2+: prepend I2C IP version to probed version shown in dev_info Andy Green
  • [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver Cousson, Benoit
    • [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver Tony Lindgren
      • [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver Cousson, Benoit
      • [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver Tony Lindgren
      • [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver Tony Lindgren
      • [PATCH 2 00/18] I2C: OMAP: Fixes and removal of cpu_... from driver Andy Green
• [PATCH] OMAP2+: hwmod data: add correct functionality flags to all omap2plus i2c dev_attr Andy Green
• [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support Thomas Gleixner
  • [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support Abhijeet Dharmapurikar
    • [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support Thomas Gleixner
      • [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support Abhijeet Dharmapurikar
      • [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support Thomas Gleixner
      • [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support Abhijeet Dharmapurikar
      • [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support Thomas Gleixner
      • [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support Mark Brown
      • [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support Thomas Gleixner
      • [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support Abhijeet Dharmapurikar
      • [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support Thomas Gleixner
      • [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support Abhijeet Dharmapurikar
• [PATCH 0/3] Harmony PCI-e and regulators Mike Rapoport
  • [PATCH 1/3] ARM: tegra: harmony: update PCI-e initialization sequence Mike Rapoport
  • [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC Mike Rapoport
    • [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC Mark Brown
      • [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC Mike Rapoport
      • [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC Mark Brown
      • [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC Mike Rapoport
      • [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC Mark Brown
      • [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC Mike Rapoport
      • [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC Mark Brown
      • [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC Mike Rapoport
    • [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC Marc Dietrich
      • [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC Mike Rapoport
      • [PATCH 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC Marvin
  • [PATCH 3/3] ARM: tegra: update defconfig Mike Rapoport
  • [PATCH 0/3] Harmony PCI-e and regulators Olof Johansson
• [PATCH v3 0/7] pruss mfd drivers Subhasish Ghosh
  • [PATCH v3 1/7] mfd: add pruss mfd driver. Subhasish Ghosh
    • [PATCH v3 1/7] mfd: add pruss mfd driver. Marc Kleine-Budde
    • [PATCH v3 1/7] mfd: add pruss mfd driver. Arnd Bergmann
    • [PATCH v3 1/7] mfd: add pruss mfd driver. Nori, Sekhar
      • [PATCH v3 1/7] mfd: add pruss mfd driver. Mark Brown
      • [PATCH v3 1/7] mfd: add pruss mfd driver. Nori, Sekhar
      • [PATCH v3 1/7] mfd: add pruss mfd driver. Nori, Sekhar
      • [PATCH v3 1/7] mfd: add pruss mfd driver. Mark Brown
  • [PATCH v3 2/7] da850: pruss platform specific additions. Subhasish Ghosh
    • [PATCH v3 2/7] da850: pruss platform specific additions. Sergei Shtylyov
  • [PATCH v3 3/7] da850: pruss board specific additions. Subhasish Ghosh
    • [PATCH v3 3/7] da850: pruss board specific additions. Sergei Shtylyov
      • [PATCH v3 3/7] da850: pruss board specific additions. Subhasish Ghosh
    • [PATCH v3 3/7] da850: pruss board specific additions. Marc Kleine-Budde
  • [PATCH v3 4/7] mfd: pruss SUART private data. Subhasish Ghosh
  • [PATCH v3 5/7] da850: pruss SUART board specific additions. Subhasish Ghosh
  • [PATCH v3 6/7] da850: pruss SUART platform specific additions. Subhasish Ghosh
  • [PATCH v3 7/7] tty: add pruss SUART driver Subhasish Ghosh
    • [PATCH v3 7/7] tty: add pruss SUART driver Subhasish Ghosh
• [PATCHv6 0/5] ARM: add initial support for Picochip picoXcell SoC Jamie Iles
  • [PATCHv6 1/5] picoxcell: support for Picochip picoXcell SoC Jamie Iles
  • [PATCHv6 2/5] picoxcell: support for the common system timers Jamie Iles
  • [PATCHv6 3/5] picoxcell: common SoC peripheral support Jamie Iles
  • [PATCHv6 4/5] picoxcell: basic clk infrastructure Jamie Iles
  • [PATCHv6 5/5] picoxcell: support for the PC7302 development board Jamie Iles
  • [PATCHv6 0/5] ARM: add initial support for Picochip picoXcell SoC Jamie Iles
• [PATCH] audio : AM3517 : Adding i2c info for AIC23 codec Abhilash K V
  • [PATCH] audio : AM3517 : Adding i2c info for AIC23 codec Tony Lindgren
• [PATCH] plat-nomadik: make GPIO interrupts work with cpuidle ApSleep Linus Walleij
• [patch v4 0/3] arm: pmu: support pmu/perf on OMAP4 tom.leiming at gmail.com
  • [patch v4 1/3] arm: introduce cross trigger interface helpers tom.leiming at gmail.com
    • [patch v4 1/3] arm: introduce cross trigger interface helpers Ben Dooks
    • [patch v4 1/3] arm: introduce cross trigger interface helpers Santosh Shilimkar
  • [patch v4 2/3] arm: pmu: allow platform specific irq enable/disable handling tom.leiming at gmail.com
  • [patch v4 3/3] arm: omap4: support pmu tom.leiming at gmail.com
• [PATCH v3 0/7] Migrate GIC to fasteoi flow control Will Deacon
  • [PATCH 2/7] ARM: omap: update GPIO chained IRQ handler to use entry/exit functions Will Deacon
  • [PATCH 4/7] ARM: s5pv310: update IRQ combiner to use chained entry/exit functions Will Deacon
  • [PATCH 7/7] ARM: gic: use handle_fasteoi_irq for SPIs Will Deacon
  • [PATCH v3 0/7] Migrate GIC to fasteoi flow control Will Deacon
• [PATCH 1/7] ARM: irq: introduce entry and exit functions for chained handlers Will Deacon
  • [PATCH 1/7] ARM: irq: introduce entry and exit functions for chained handlers Thomas Gleixner
    • [PATCH 1/7] ARM: irq: introduce entry and exit functions for chained handlers Will Deacon
      • [PATCH 1/7] ARM: irq: introduce entry and exit functions for chained handlers Thomas Gleixner
      • [PATCH 1/7] ARM: irq: introduce entry and exit functions for chained handlers Will Deacon
• [PATCH 3/7] ARM: tegra: update GPIO chained IRQ handler to use entry/exit functions Will Deacon
• [PATCH 5/7] ARM: msm: update GPIO chained IRQ handler to use entry/exit functions Will Deacon
• [PATCH 6/7] ARM: nmk: update GPIO chained IRQ handler to entry/exit functions Will Deacon
• [PATCH v2] [ARM] MX1: Add ARMadeus Systems APF9328 board support Gwenhael Goavec-Merou
• [Qualcomm PM8921 MFD v2 1/6] mfd: pm8921: Add PMIC 8921 core driver Randy Dunlap
• [PATCH v3 2/3] [ARM] perfevents: Add support for Scorpion performance monitors Sheetal Sahasrabudhe
  • [PATCH v3 2/3] [ARM] perfevents: Add support for Scorpion performance monitors Jean Pihet
    • [PATCH v3 2/3] [ARM] perfevents: Add support for Scorpion performance monitors Sheetal Sahasrabudhe
      • [PATCH v3 2/3] [ARM] perfevents: Add support for Scorpion performance monitors Jean Pihet
  • [PATCH v4 2/3] [ARM] perfevents: Add support for Scorpion performance monitors Sheetal Sahasrabudhe
    • [PATCH v4 2/3] [ARM] perfevents: Add support for Scorpion performance monitors Bryan Huntsman
      • [PATCH v4 2/3] [ARM] perfevents: Add support for Scorpion performance monitors Sheetal Sahasrabudhe
      • [PATCH v4 2/3] [ARM] perfevents: Add support for Scorpion performance monitors Jean Pihet
• [PATCH v3 7/7] tty: add pruss SUART driver Randy Dunlap
  • [PATCH v3 7/7] tty: add pruss SUART driver Subhasish Ghosh
• [PATCH v3 1/2] MAINTAINERS: Add drivers/platform/msm to MSM subsystem Kenneth Heitke
• [PATCHv3 3/9] macb: unify at91 and avr32 platform data Jamie Iles
• [PATCH 2/2] macb: remove conditional clk handling Jamie Iles
• [Qualcomm PM8921 MFD v2 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver Mark Brown
  • [Qualcomm PM8921 MFD v2 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver Abhijeet Dharmapurikar
    • [Qualcomm PM8921 MFD v2 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver Trilok Soni
    • [Qualcomm PM8921 MFD v2 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver Mark Brown
• [Qualcomm PM8921 MFD v2 5/6] MAINTAINERS: Add patterns for pmic 8921 files to MSM subsystem Mark Brown
• [PATCH v3 0/7] ARM timer clock api support Rob Herring
  • [PATCH v3 1/7] ARM: integrator cp: add sp804 clock Rob Herring
  • [PATCH v3 2/7] ARM: realview: add sp804 clock Rob Herring
  • [PATCH v3 3/7] ARM: versatile: add sp804 clock Rob Herring
  • [PATCH v3 4/7] ARM: vexpress: add sp804 clock Rob Herring
  • [PATCH v3 5/7] ARM: timer-sp: support timer clock freq other than 1MHz Rob Herring
  • [PATCH v3 6/7] ARM: smp_twd: add clock api support Rob Herring
    • [PATCH v3 6/7] ARM: smp_twd: add clock api support Colin Cross
      • [PATCH v3 6/7] ARM: smp_twd: add clock api support Rob Herring
  • [PATCH v3 7/7] ARM: vexpress: add smp_twd clock Rob Herring
  • [PATCH v3 0/7] ARM timer clock api support Russell King - ARM Linux
    • [PATCH v3 0/7] ARM timer clock api support Rob Herring
      • [PATCH v3 0/7] ARM timer clock api support Russell King - ARM Linux
• [PATCH 1/4] msm: iommu: Clock control for the IOMMU driver David Brown
• [PATCH] OMAP2+: clockdomain: add flag that will block autodeps from being added for a clockdomain Paul Walmsley
  • [PATCH] OMAP2+: clockdomain: add flag that will block autodeps from being added for a clockdomain Paul Walmsley
• [PATCH FYI] msm: Dummy 8960 clock driver David Brown
• [PATCH 0/5] Fix build failures with binutils 2.21 Ben Hutchings
  • [PATCH 5/5] arm: Fix .size directives for __arm{7,9}tdmi_proc_info Ben Hutchings
• [PATCH] ARM: EXYNOS4: CPUIDLE Support Jaecheol Lee
  • [PATCH] ARM: EXYNOS4: CPUIDLE Support Kukjin Kim
    • [PATCH] ARM: EXYNOS4: CPUIDLE Support Kyungmin Park
      • [PATCH] ARM: EXYNOS4: CPUIDLE Support Kukjin Kim
• [PATCH 0/3] ARM: EXYNOS4: Support suspend to ram Jaecheol Lee
  • [PATCH 1/3] ARM: EXYNOS4: Add PMU Registers for PM Jaecheol Lee
  • [PATCH 2/3] ARM: EXYNOS4: Suspend to RAM Support Jaecheol Lee
    • [PATCH 2/3] ARM: EXYNOS4: Suspend to RAM Support MyungJoo Ham
      • [PATCH 2/3] ARM: EXYNOS4: Suspend to RAM Support Kukjin Kim
    • [PATCH 2/3] ARM: EXYNOS4: Suspend to RAM Support Russell King - ARM Linux
      • [PATCH 2/3] ARM: EXYNOS4: Suspend to RAM Support Kukjin Kim
  • [PATCH 3/3] ARM: EXYNOS4: Update HRT for supporting PM Jaecheol Lee
• [PATCH v4 0/3] ARM: S5P: Add HRT support for s5p series Sangbeom Kim
  • [PATCH v4 1/3] ARM: S5P: Add s5p_timer support for HRT Sangbeom Kim
    • [PATCH v4 1/3] ARM: S5P: Add s5p_timer support for HRT Jamie Iles
      • [PATCH v4 1/3] ARM: S5P: Add s5p_timer support for HRT Sangbeom Kim
      • [PATCH v4 1/3] ARM: S5P: Add s5p_timer support for HRT Jamie Iles
      • [PATCH v4 1/3] ARM: S5P: Add s5p_timer support for HRT Kukjin Kim
  • [PATCH v4 2/3] ARM: S5P: Update machine initialization for HRT Sangbeom Kim
  • [PATCH v4 3/3] ARM: S5P: Update defconfig for HRT support Sangbeom Kim
  • [PATCH v4 0/3] ARM: S5P: Add HRT support for s5p series Kukjin Kim
• [PATCH] net/fec: check id_entry pointer before using it Jason Liu
  • [PATCH] net/fec: check id_entry pointer before using it Shawn Guo
  • [PATCH] net/fec: check id_entry pointer before using it Wolfram Sang
    • [PATCH] net/fec: check id_entry pointer before using it Jason Liu
      • [PATCH] net/fec: check id_entry pointer before using it Wolfram Sang
• [RFC PATCH V2] ARM: Use generic BUG() handler Simon Glass
  • [RFC PATCH V2] ARM: Use generic BUG() handler Dave Martin
    • [RFC PATCH V2] ARM: Use generic BUG() handler Simon Glass
• [PATCH v2] OMAP4: PM: Set static dependency between MPUSS and EMIF Santosh Shilimkar
• [PATCH] omap2+: mux: Remove the use of IDLE flag. sricharan
  • [PATCH] omap2+: mux: Remove the use of IDLE flag. Tony Lindgren
• [PATCH] omap2+: mux: Remove the use of IDLE flag. Sricharan R
  • [PATCH] omap2+: mux: Remove the use of IDLE flag. Sricharan R
    • [PATCH] omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init (Re: [PATCH] omap2+: mux: Remove the use of IDLE flag) Tony Lindgren
      • [PATCH] omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init (Re: [PATCH] omap2+: mux: Remove the use of IDLE flag) Sricharan R
      • [PATCH] omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init (Re: [PATCH] omap2+: mux: Remove the use of IDLE flag) Sricharan R
      • [PATCH] omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init (Re: [PATCH] omap2+: mux: Remove the use of IDLE flag) Tony Lindgren
• [PATCH 0/3] TP6105x core and regulator driver v2 Linus Walleij
• [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator v2 Linus Walleij
  • [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator v2 Samuel Ortiz
    • [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator v2 Linus Walleij
      • [PATCH 3/3] mach-ux500: configure board for the TPS61052 regulator v2 Samuel Ortiz
• [GIT PULL] OMAP: L3 error handling driver for for 2.6.39 Santosh Shilimkar
• [PATCH] stable: sheevaplug-setup.c fix LED color name and add support for second LED This is a patch to the sheevaplug-setup.c file that fixes the color name of the existing health LED. That LED gpio 49 is green when off and blue when on. The patch also adds support for the second LED that is green when off and red when on. Signed-off-by: Robin Becker <robin at reportlab.com> Robin Becker
  • [PATCH] stable: sheevaplug-setup.c fix LED color name and add support for second LED This is a patch to the sheevaplug-setup.c file that fixes the color name of the existing health LED. That LED gpio 49 is green when off and blue when on. The patch also adds support for the second LED that is green when off and red when on. Signed-off-by: Robin Becker <robin at reportlab.com> Sergei Shtylyov
• IRQ handler under load - slow response Arno Steffen
  • IRQ handler under load - slow response Kurt Van Dijck
    • IRQ handler under load - slow response Arno Steffen
      • IRQ handler under load - slow response Kurt Van Dijck
• [PATCH] stable: sheevaplug-setup.c fix LED color name and add support for second LED This is a patch to the sheevaplug-setup.c file that fixes the color name of the existing health LED. That LED gpio 49 is green when off and blue when on. The pat saeed bishara
• [PATCH v2 0/3] Harmony PCI-e and regulators Mike Rapoport
  • [PATCH v2 0/3] Harmony PCI-e and regulators Mike Rapoport
• [PATCH v2 1/3] ARM: tegra: harmony: update PCI-e initialization sequence Mike Rapoport
• [PATCH v2 2/3] ARM: tegra: harmony: initialize the TPS65862 PMIC Mike Rapoport
• [PATCH v2 3/3] ARM: tegra: update defconfig Mike Rapoport
• [PATCH 2 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test Andy Green
  • [PATCH 2 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test Cousson, Benoit
• [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables Catalin Marinas
  • [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables Russell King - ARM Linux
    • [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables Catalin Marinas
      • [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables Russell King - ARM Linux
      • [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables Catalin Marinas
      • [RFC PATCH 2/2] ARMv7: Invalidate the TLB before freeing page tables Russell King - ARM Linux
• [RFC PATCHv1 0/2] Export SoC info through sysfs Maxime Coquelin
  • [RFC PATCHv1 1/2] Export SoC info through sysfs Maxime Coquelin
    • [RFC PATCHv1 1/2] Export SoC info through sysfs Jamie Iles
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Maxime Coquelin
    • [RFC PATCHv1 1/2] Export SoC info through sysfs Mark Brown
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Maxime Coquelin
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Mark Brown
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Maxime Coquelin
    • [RFC PATCHv1 1/2] Export SoC info through sysfs Arnd Bergmann
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Maxime Coquelin
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Linus Walleij
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Mark Brown
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Arnd Bergmann
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Mark Brown
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Arnd Bergmann
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Russell King - ARM Linux
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Linus Walleij
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Helmut Raiger
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Mark Brown
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Arnd Bergmann
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Mark Brown
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Arnd Bergmann
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Arnd Bergmann
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Linus Walleij
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Arnd Bergmann
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Linus Walleij
      • [RFC PATCHv1 1/2] Export SoC info through sysfs Arnd Bergmann
    • [RFC PATCHv1 1/2] Export SoC info through sysfs Ryan Mallon
  • [RFC PATCHv1 2/2] ux500: Export U8500 SoC info through sysfs Maxime Coquelin
    • [RFC PATCHv1 2/2] ux500: Export U8500 SoC info through sysfs Arnd Bergmann
  • [RFC PATCHv1 0/2] Export SoC info through sysfs Eduardo Valentin
    • [RFC PATCHv1 0/2] Export SoC info through sysfs Maxime Coquelin
• [PATCH 0/4] SCM fixes and updates Stephen Boyd
  • [PATCH 0/4] SCM fixes and updates David Brown
• [PATCH] ARM: hw_breakpoint: Fix newlines in WARNings Stephen Boyd
  • [PATCH] ARM: hw_breakpoint: Fix newlines in WARNings Will Deacon
• [PATCH 0/2] OMAP: Overo: Add gpio-leds and gpio-keys support Steve Sakoman
  • [PATCH 1/2] OMAP: Add gpio-leds support for Overo Steve Sakoman
  • [PATCH 2/2] OMAP: Add gpio-keys support for Overo Steve Sakoman
• [PATCH RFC] arm: mini2440: Fix uda134x codec problem. Marek Belisko
  • [PATCH RFC] arm: mini2440: Fix uda134x codec problem. Liam Girdwood
  • [PATCH RFC] arm: mini2440: Fix uda134x codec problem. Mark Brown
    • [PATCH RFC] arm: mini2440: Fix uda134x codec problem. Belisko Marek
      • [PATCH RFC] arm: mini2440: Fix uda134x codec problem. Mark Brown
      • [PATCH RFC] arm: mini2440: Fix uda134x codec problem. Ben Dooks
• [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage John Bonesio
  • [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage Ben Dooks
    • [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage Grant Likely
  • [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage Shawn Guo
    • [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage Shawn Guo
      • [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage Grant Likely
  • [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage Nicolas Pitre
    • [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage John Bonesio
      • [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage Nicolas Pitre
      • [PATCH] ARM:boot:device tree: Allow the device tree binary to be appended to zImage John Bonesio
• [PATCH] omap2plus: smartreflex: remove sr debug directory in omap_sr_remove() Kevin Hilman
• [PATCH v2 0/2] OMAP: Overo: Add gpio-leds and gpio-keys support Steve Sakoman
  • [PATCH v2 1/2] OMAP: Add gpio-leds support for Overo Steve Sakoman
  • [PATCH v2 2/2] OMAP: Add gpio-keys support for Overo Steve Sakoman
  • [PATCH v2 0/2] OMAP: Overo: Add gpio-leds and gpio-keys support Tony Lindgren
  • [PATCH v2 0/2] OMAP: Overo: Add gpio-leds and gpio-keys support Tomi Valkeinen
• [PATCH] OMAP2+: hwmod: allow board files to prevent devices from being reset upon init Paul Walmsley
• [PATCH] OMAP4: hwmod: Disable hardware-controlled idle for GPT1 Paul Walmsley
  • [PATCH] OMAP4: hwmod: Disable hardware-controlled idle for GPT1 Paul Walmsley
    • [PATCH] OMAP4: hwmod: Disable hardware-controlled idle for GPT1 Santosh Shilimkar
      • [PATCH] OMAP4: hwmod: Disable hardware-controlled idle for GPT1 Paul Walmsley
      • [PATCH] OMAP4: hwmod: Disable hardware-controlled idle for GPT1 Santosh Shilimkar
• [PATCH] OMAP3: hwmod: remove incorrect SmartReflex -> L4 CORE interconnect links Paul Walmsley
• [PATCH] ARM: fix compiling error due to debug_info change Bryan Wu
• [PATCH 1/2] ARM: fix compiling error due to debug_info change Bryan Wu
• [PATCH] ARM: fix compiling error due to debug_info change Bryan Wu
• [PATCH 0/3] Peripheral image loader (PIL) Stephen Boyd
  • [PATCH 1/3] msm: 8660: Add clock control regions to iomap Stephen Boyd
    • [PATCH 1/3] msm: 8660: Add clock control regions to iomap Sergei Shtylyov
      • [PATCH 1/3] msm: 8660: Add clock control regions to iomap David Brown
      • [PATCH 1/3] msm: 8660: Add clock control regions to iomap Stephen Boyd
  • [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver Stephen Boyd
    • [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver Daniel Walker
      • [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver David Brown
      • [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver Saravana Kannan
      • [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver Daniel Walker
      • [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver Daniel Walker
      • [PATCH 2/3] msm: Peripheral Image Loader (PIL) driver Bryan Huntsman
  • [PATCH 3/3] msm: documentation: Add pil documentation Stephen Boyd
• [PATCH V2 0/3] ARM: EXYNOS4: Suspend to RAM Support Kukjin Kim
  • [PATCH V2 1/3] ARM: EXYNOS4: Add PMU and CMU Registers for PM Kukjin Kim
  • [PATCH V2 2/3] ARM: EXYNOS4: Suspend to RAM Support Kukjin Kim
  • [PATCH V2 3/3] ARM: EXYNOS4: Update HRT for supporting PM Kukjin Kim
• [PATCH V3 2/3] OMAP4: Update Voltage Rail Values for MPU, IVA and CORE Shweta Gulati
  • [PATCH V3 2/3] OMAP4: Update Voltage Rail Values for MPU, IVA and CORE Nishanth Menon
• [PATCH V1] mx51 enchance the sd/mmc HW timing compatibility on mx51 boards. Richard Zhu
  • [PATCH V1] mx51 enchance the sd/mmc HW timing compatibility on mx51 boards. Shawn Guo
• [PATCH] OMAP4: Intialize IVA Device in addition to DSP device. Shweta Gulati
  • [PATCH] OMAP4: Intialize IVA Device in addition to DSP device. Vishwanath Sripathy
    • [PATCH] OMAP4: Intialize IVA Device in addition to DSP device. Nishanth Menon
      • [PATCH] OMAP4: Intialize IVA Device in addition to DSP device. Gulati, Shweta
• [PATCH v2 0/5] OMAP3: PM: Fixes for low power code Santosh Shilimkar
  • [PATCH v2 1/5] OMAP3: PM: Use ARMv7 supported instructions instead of legacy CP15 ones Santosh Shilimkar
  • [PATCH v2 2/5] OMAP3: PM: Fix the MMU on sequence in the asm code Santosh Shilimkar
  • [PATCH v2 3/5] OMAP3: PM: Allow the cache clean when L1 is lost. Santosh Shilimkar
  • [PATCH v2 4/5] OMAP3: PM: Remove un-necessary cp15 registers form low power cpu context Santosh Shilimkar
  • [PATCH v2 5/5] OMAP3: PM: Clear the SCTLR C bit in asm code to prevent data cache allocation Santosh Shilimkar
  • [PATCH v2 0/5] OMAP3: PM: Fixes for low power code Kevin Hilman
• [PATCH] omap: wd_timer: Fix crash frm wdt_probe when !CONFIG_RUNTIME_PM Paul Walmsley
• [RFC 1/2] AHCI Add the AHCI SATA feature on MX53 platforms Richard Zhu
  • [RFC 2/2] MX53 Enable the AHCI SATA on MX53 LOCO Richard Zhu
• [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms Richard Zhu
  • [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO Richard Zhu
• Recall: [RFC 2/2] MX53 Enable the AHCI SATA on MX53 LOCO Zhu Richard-R65037
  • Recall: [RFC 2/2] MX53 Enable the AHCI SATA on MX53 LOCO Russell King - ARM Linux
• Recall: [RFC 1/2] AHCI Add the AHCI SATA feature on MX53 platforms Zhu Richard-R65037
• Single-stepping ARMv7 with KDB... Andrei Warkentin
  • Single-stepping ARMv7 with KDB... Will Deacon
• [PATCH 0/8] macb: add support for Cadence GEM Jamie Iles
  • [PATCH 1/8] macb: unify at91 and avr32 platform data Jamie Iles
    • [PATCH 1/8] macb: unify at91 and avr32 platform data Nicolas Ferre
      • [PATCH 1/8] macb: unify at91 and avr32 platform data Jamie Iles
      • [PATCH 1/8] macb: unify at91 and avr32 platform data Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/8] macb: unify at91 and avr32 platform data Jamie Iles
      • [PATCH 1/8] macb: unify at91 and avr32 platform data Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/8] macb: unify at91 and avr32 platform data Jamie Iles
      • [PATCH 1/8] macb: unify at91 and avr32 platform data Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/8] macb: unify at91 and avr32 platform data Jamie Iles
  • [PATCH 2/8] macb: detect hclk presence from platform data Jamie Iles
    • [PATCH 2/8] macb: detect hclk presence from platform data Russell King - ARM Linux
      • [PATCH 2/8] macb: detect hclk presence from platform data Jamie Iles
      • [PATCH 2/8] macb: detect hclk presence from platform data Jamie Iles
    • [PATCH 2/8] macb: detect hclk presence from platform data Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 2/8] macb: detect hclk presence from platform data Jamie Iles
      • [PATCH 2/8] macb: detect hclk presence from platform data Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 2/8] macb: detect hclk presence from platform data Jamie Iles
      • [PATCH 2/8] macb: detect hclk presence from platform data Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/8] macb: convert printk to pr_ and friends Jamie Iles
    • [PATCH 3/8] macb: convert printk to pr_ and friends Joe Perches
      • [PATCH 3/8] macb: convert printk to pr_ and friends Jamie Iles
    • [PATCH 3/8] macb: convert printk to pr_ and friends Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/8] macb: initial support for Cadence GEM Jamie Iles
    • [PATCH 4/8] macb: initial support for Cadence GEM Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 4/8] macb: initial support for Cadence GEM Jamie Iles
      • [PATCH 4/8] macb: initial support for Cadence GEM Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 4/8] macb: initial support for Cadence GEM Jamie Iles
  • [PATCH 5/8] macb: handle HW address registers for GEM devices Jamie Iles
  • [PATCH 6/8] macb: support higher rate GEM MDIO clock divisors Jamie Iles
  • [PATCH 7/8] macb: support statistics for GEM devices Jamie Iles
  • [PATCH 8/8] macb: support data bus widths > 32 bits Jamie Iles
    • [PATCH 8/8] macb: support data bus widths > 32 bits Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 8/8] macb: support data bus widths > 32 bits Jamie Iles
• [PATCH 1/3] OMAP2+: PM: omap device: API's for handling mstandby mode Paul Walmsley
• [PATCHv2] omap2/3: dmtimer: Enable autoidle Paul Walmsley
• [PATCH] ARM: aout-core: zero thread debug registers in a.out core dump Bryan Wu
• [PATCH 1/2] at91: provide pclk and hclk for macb ethernet devices Jamie Iles
• [PATCH v3 0/3] ARM: S5P: Add platform helpers for MIPI-CSIS/DSIM DPHY Sylwester Nawrocki
  • [PATCH v4 1/3] ARM: S5P: Rename MIPI-CSIS driver header and update Copyright Sylwester Nawrocki
  • [PATCH v4 2/3] ARM: S5P: Extend MIPI-CSIS platform_data with the PHY control callback Sylwester Nawrocki
  • [PATCH v4 3/3] ARM: S5P: Add support for common MIPI CSIS/DSIM D-PHY control Sylwester Nawrocki
  • [PATCH v3 0/3] ARM: S5P: Add platform helpers for MIPI-CSIS/DSIM DPHY Kukjin Kim
• [PATCH] ARM: aout-core: zero thread debug registers in a.out core dump Will Deacon
• i.MX Pull request for -next Sascha Hauer
  • i.MX Pull request for -next Russell King - ARM Linux
    • i.MX Pull request for -next Sascha Hauer
• [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Santosh Shilimkar
  • [PATCH v2 01/19] OMAP4: PM: Add omap WakeupGen module support Santosh Shilimkar
  • [PATCH v2 02/19] OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit Santosh Shilimkar
  • [PATCH v2 04/19] OMAP4: PM: Add SAR RAM support Santosh Shilimkar
  • [PATCH v2 05/19] OMAP4: PM: Add CPUX OFF mode support Santosh Shilimkar
  • [PATCH v2 06/19] OMAP4: PM: Initialise all the clockdomains to supported states Santosh Shilimkar
  • [PATCH v2 07/19] OMAP4: PM: Program CPU1 to hit OFF when off-lined Santosh Shilimkar
  • [PATCH v2 09/19] OMAP4: PM: Add GIC distributor and interface enable/disable accessory API Santosh Shilimkar
  • [PATCH v2 10/19] OMAP4: PM: Add GIC save/restore support Santosh Shilimkar
  • [PATCH v2 11/19] OMAP4: PM: Add WakeupGen save/restore support Santosh Shilimkar
  • [PATCH v2 12/19] OMAP4: PM: Add L2 cache lowpower support Santosh Shilimkar
  • [PATCH v2 14/19] OMAP4: pm-debug: Add wakeup timer and debug counters Santosh Shilimkar
  • [PATCH v2 15/19] OMAP4: cpuidle: Basic CPUidle support Santosh Shilimkar
  • [PATCH v2 16/19] OMAP4: cpuidle: Add MPUSS RET OFF states Santosh Shilimkar
  • [PATCH v2 17/19] OMAP4: cpuidle: Switch to gptimer from twd in deeper C-states. Santosh Shilimkar
  • [PATCH v2 18/19] OMAP4: cpuidle: Add CPU hotplug notifier and prepare() hook. Santosh Shilimkar
  • [PATCH v2 19/19] OMAP4: Remove un-used do_wfi() macro. Santosh Shilimkar
  • [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Kevin Hilman
  • [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Kevin Hilman
    • [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Santosh Shilimkar
      • [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Santosh Shilimkar
      • [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Kevin Hilman
      • [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Santosh Shilimkar
      • [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Kevin Hilman
      • [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Santosh Shilimkar
      • [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Kevin Hilman
      • [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Santosh Shilimkar
      • [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Kevin Hilman
      • [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Santosh Shilimkar
      • [PATCH v2 00/19] OMAP4: PM: Suspend, CPU-hotplug and CPUilde support. Santosh Shilimkar
• [PATCH v2 03/19] OMAP4: PM: Export omap4_get_base*() rather than global address pointers Santosh Shilimkar
• [PATCH v2 08/19] OMAP4: PM: CPU1 wakeup workaround from Low power modes Santosh Shilimkar
• [PATCH v2 13/19] OMAP4: suspend: Add MPUSS RET and OFF support Santosh Shilimkar
• [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init Mark Brown
  • [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init Kukjin Kim
  • [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init Kukjin Kim
    • [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init Mark Brown
  • [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init Uwe Kleine-König
    • [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init Mark Brown
      • [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init Uwe Kleine-König
      • [PATCH] ARM: S3C64XX: Fix section mismatch from cpufreq init Mark Brown
• error: #error Unknown data abort handler type from glue.h file Madhavi Manchala
• Newbies question: Which tree do I base my mc13783-regulator patches on? Helmut Raiger
  • Newbies question: Which tree do I base my mc13783-regulator patches on? Mark Brown
• [PATCH] can : AM3517EVM : add platform specific init Abhilash K V
  • [PATCH] can : AM3517EVM : add platform specific init Sergei Shtylyov
  • [PATCH] can : AM3517EVM : add platform specific init Wolfgang Grandegger
• EXPLORE: Lifesciences in India! Tushara S. Nair
• [PATCH v2 0/7] OMAP: add PM CONSTRAINTS framework Jean Pihet
  • [PATCH v2 1/7] OMAP PM: create a PM layer plugin for per-device constraints Jean Pihet
  • [PATCH v2 2/7] OMAP: PM CONSTRAINTS: add an enum for the classes of constraint Jean Pihet
  • [PATCH v2 3/7] OMAP: PM CONSTRAINTS: implement wake-up latency constraints Jean Pihet
    • [PATCH v2 3/7] OMAP: PM CONSTRAINTS: implement wake-up latency constraints Kevin Hilman
  • [PATCH v2 4/7] OMAP: PM CONSTRAINTS: implement the constraints management code Jean Pihet
    • [PATCH v2 4/7] OMAP: PM CONSTRAINTS: implement the constraints management code Kevin Hilman
      • [PATCH v2 4/7] OMAP: PM CONSTRAINTS: implement the constraints management code Jean Pihet
      • [PATCH v2 4/7] OMAP: PM CONSTRAINTS: implement the constraints management code Kevin Hilman
  • [PATCH v2 5/7] OMAP: PM CONSTRAINTS: add a power domains state update function in hwmod Jean Pihet
    • [PATCH v2 5/7] OMAP: PM CONSTRAINTS: add a power domains state update function in hwmod Kevin Hilman
  • [PATCH v2 6/7] OMAP: PM CONSTRAINTS: control power domains next state Jean Pihet
    • [PATCH v2 6/7] OMAP: PM CONSTRAINTS: control power domains next state Kevin Hilman
  • [PATCH v2 7/7] OMAP: PM CONSTRAINTS: add power domains wake-up latency figures Jean Pihet
    • [PATCH v2 7/7] OMAP: PM CONSTRAINTS: add power domains wake-up latency figures Kevin Hilman
• at91samx5: support Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/6] AT91: overall definition: add 5series support Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/6] AT91: PMC header: add 5series support Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/6] AT91: clock: add 5series chip family support Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/6] AT91: AT91SAM9x5 processors support Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/6] AT91: pio: add new PIO3a features Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 6/6] AT91: at91sam9x5: add chip and board file Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm/dt: Add dtb make rule Rob Herring
  • [PATCH] arm/dt: Add dtb make rule Rob Herring
    • [PATCH] arm/dt: Add dtb make rule Shawn Guo
    • [PATCH] arm/dt: Add dtb make rule Jason Liu
    • [PATCH] arm/dt: Add dtb make rule Grant Likely
• [PATCH] ARM: mx27: fix gpt4/5 base address Wolfram Sang
• [GIT PULL] OMAP: core/clock: patches for 2.6.39 Paul Walmsley
• [PATCH] kbuild: reenable section mismatch analysis Andrew Morton
  • [PATCH] kbuild: reenable section mismatch analysis Randy Dunlap
  • [PATCH] kbuild: reenable section mismatch analysis Mike Frysinger
    • [PATCH] kbuild: reenable section mismatch analysis Andrew Morton
      • [PATCH] kbuild: reenable section mismatch analysis Mike Frysinger
  • [PATCH] kbuild: reenable section mismatch analysis Sam Ravnborg
• [PATCH] OMAP2+: voltage: don't build voltage layer when !CONFIG_PM Kevin Hilman
  • [PATCH] OMAP2+: voltage: don't build voltage layer when !CONFIG_PM Paul Walmsley
• [GIT PULL] OMAP PM updates for 2.6.39 Kevin Hilman
  • [GIT PULL] OMAP PM updates for 2.6.39 Jean Pihet
    • [GIT PULL] OMAP PM updates for 2.6.39 Kevin Hilman
      • [GIT PULL] OMAP PM updates for 2.6.39 Jean Pihet
  • [GIT PULL] OMAP PM updates for 2.6.39 Stephan Raue
    • [GIT PULL] OMAP PM updates for 2.6.39 Tony Lindgren
      • [GIT PULL] OMAP PM updates for 2.6.39 Stephan Raue
      • [GIT PULL] OMAP PM updates for 2.6.39 Santosh Shilimkar
      • [GIT PULL] OMAP PM updates for 2.6.39 Tony Lindgren
• [PATCH V4 2/5] omap4: board-4430sdp: Initialise the serial pads. sricharan
  • [PATCH V4 3/5] omap3: board-3430sdp: Initialise the serial pads. sricharan
  • [PATCH V4 4/5] omap4: board-omap4panda: Initialise the serial pads. sricharan
• [PATCH V3] OMAP4: PM: Set static dependency between MPUSS-EMIF and MPUSS-L3_1 Santosh Shilimkar
• [PATCH] z2-battery: Fix count of properties Vasily Khoruzhick
  • [PATCH] z2-battery: Fix count of properties Sergei Shtylyov
    • [PATCH v2] z2-battery: Fix count of properties Vasily Khoruzhick
      • [PATCH v2] z2-battery: Fix count of properties Marek Vasut
      • [PATCH v2] z2-battery: Fix count of properties Anton Vorontsov
• [PATCH 1/8] ARM: PXA: Z2: Use only power button as wake source Vasily Khoruzhick
  • [PATCH 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Vasily Khoruzhick
    • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Vasily Khoruzhick
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Marek Vasut
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Vasily Khoruzhick
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Marek Vasut
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Vasily Khoruzhick
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Marek Vasut
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Vasily Khoruzhick
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Marek Vasut
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Vasily Khoruzhick
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Marek Vasut
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Pavel Machek
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Marek Vasut
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Pavel Machek
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Marek Vasut
      • [PATCH v2 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Vasily Khoruzhick
    • [PATCH 2/8] ARM: PXA: Z2: Enable OHCI on Zipit Z2 Marek Vasut
  • [PATCH 3/8] ARM: PXA: Z2: Fix battery pdata Vasily Khoruzhick
    • [PATCH 3/8] ARM: PXA: Z2: Fix battery pdata Marek Vasut
  • [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo Vasily Khoruzhick
    • [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo Marek Vasut
      • [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo Vasily Khoruzhick
      • [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo Marek Vasut
      • [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo Pavel Machek
      • [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo Marek Vasut
      • [PATCH 4/8] ARM: PXA: Z2: Add mtd partition with logo Pavel Machek
  • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Vasily Khoruzhick
    • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Marek Vasut
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Vasily Khoruzhick
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Marek Vasut
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Vasily Khoruzhick
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Marek Vasut
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Vasily Khoruzhick
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Marek Vasut
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Eric Miao
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Vasily Khoruzhick
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Marek Vasut
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Vasily Khoruzhick
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Marek Vasut
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Vasily Khoruzhick
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Marek Vasut
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Vasily Khoruzhick
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Marek Vasut
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Eric Miao
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Vasily Khoruzhick
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Eric Miao
      • [PATCH v2] ARM: PXA: Z2: Add poweroff function Vasily Khoruzhick
      • [PATCH 5/8] ARM: PXA: Z2: Add poweroff function Pavel Machek
  • [PATCH 6/8] ARM: PXA: Z2: Fix libertas init/tear down sequences Vasily Khoruzhick
    • [PATCH 6/8] ARM: PXA: Z2: Fix libertas init/tear down sequences Marek Vasut
      • [PATCH 6/8] ARM: PXA: Z2: Fix libertas init/tear down sequences Vasily Khoruzhick
      • [PATCH 6/8] ARM: PXA: Z2: Fix libertas init/tear down sequences Marek Vasut
  • [PATCH 7/8] ARM: PXA: Z2: Keep kbd backlight disabled by default Vasily Khoruzhick
    • [PATCH 7/8] ARM: PXA: Z2: Keep kbd backlight disabled by default Marek Vasut
  • [PATCH 8/8] ARM: PXA: Z2: Add default triggers for LEDs Vasily Khoruzhick
    • [PATCH 8/8] ARM: PXA: Z2: Add default triggers for LEDs Marek Vasut
  • [PATCH 1/8] ARM: PXA: Z2: Use only power button as wake source Marek Vasut
  • [PATCH 1/8] ARM: PXA: Z2: Use only power button as wake source Pavel Machek
• [PATCH] OMAP4: PM: Avoid omap4_pm_init() on OMAP4430 ES1.0 Santosh Shilimkar
• [RFC PATCHv2 0/2] Export SoC info through sysfs Maxime Coquelin
• [RFC PATCHv2 1/2] Export SoC info through sysfs Maxime Coquelin
  • [RFC PATCHv2 1/2] Export SoC info through sysfs Eduardo Valentin
    • [RFC PATCHv2 1/2] Export SoC info through sysfs Maxime Coquelin
      • [RFC PATCHv2 1/2] Export SoC info through sysfs Eduardo Valentin
  • [RFC PATCHv2 1/2] Export SoC info through sysfs Arnd Bergmann
    • [RFC PATCHv2 1/2] Export SoC info through sysfs Eduardo Valentin
    • [RFC PATCHv2 1/2] Export SoC info through sysfs Ben Dooks
      • [RFC PATCHv2 1/2] Export SoC info through sysfs Eduardo Valentin
    • [RFC PATCHv2 1/2] Export SoC info through sysfs Greg KH
      • [RFC PATCHv2 1/2] Export SoC info through sysfs Eduardo Valentin
      • [RFC PATCHv2 1/2] Export SoC info through sysfs Greg KH
      • [RFC PATCHv2 1/2] Export SoC info through sysfs Arnd Bergmann
      • [RFC PATCHv2 1/2] Export SoC info through sysfs Greg KH
      • [RFC PATCHv2 1/2] Export SoC info through sysfs Arnd Bergmann
• [RFC PATCHv2 2/2] ux500: Export U8500 SoC info through sysfs Maxime Coquelin
  • [RFC PATCHv2 2/2] ux500: Export U8500 SoC info through sysfs Jean-Christophe PLAGNIOL-VILLARD
    • [RFC PATCHv2 2/2] ux500: Export U8500 SoC info through sysfs Linus Walleij
      • [RFC PATCHv2 2/2] ux500: Export U8500 SoC info through sysfs Jean-Christophe PLAGNIOL-VILLARD
• questions about arm trustzone shiraz hashim
• [PATCH v2 REPOST] ARM: Thumb-2: Add local symbols to work around gas behaviour Dave Martin
• [PATCH v2 REPOST] ARM: Thumb-2: Add local symbols to work around gas behaviour Dave Martin
• [PATCH RESEND] S3C2440: AT2440EVB: Add touchscreen support Ramax Lo
• memmap_valid_within problem with sparsely populated sections Will Deacon
  • memmap_valid_within problem with sparsely populated sections Will Deacon
• [PATCH] arm: realview: Fix secondary GIC initialisation for EB with MPCore tile Pawel Moll
• [RFC] kprobes with thumb2 conditional code Tixy
  • [RFC] kprobes with thumb2 conditional code Dave Martin
    • [RFC] kprobes with thumb2 conditional code Nicolas Pitre
      • [RFC] kprobes with thumb2 conditional code Dave Martin
• [RFC] ARM: Cortex-A9: Enable dynamic clock gating Catalin Marinas
  • [RFC] ARM: Cortex-A9: Enable dynamic clock gating Santosh Shilimkar
• [PATCH] macb: detect IP version to determin if we are on at91 or avr32 Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] macb: detect IP version to determin if we are on at91 or avr32 Russell King - ARM Linux
    • [PATCH] macb: detect IP version to determin if we are on at91 or avr32 Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] macb: detect IP version to determin if we are on at91 or avr32 Jamie Iles
• [PATCH] arm: mmci: Add ARM variant with extended FIFO Pawel Moll
  • [PATCH] arm: mmci: Add ARM variant with extended FIFO Matt Waddel
    • [PATCH] arm: mmci: Add ARM variant with extended FIFO Russell King - ARM Linux
      • [PATCH] arm: mmci: Add ARM variant with extended FIFO Pawel Moll
  • [PATCH] arm: mmci: Add ARM variant with extended FIFO Linus Walleij
    • [PATCH] arm: mmci: Add ARM variant with extended FIFO Pawel Moll
• [GIT PULL] another set of OMAP PM updates for 2.6.39 Kevin Hilman
• [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39 Linus Walleij
  • [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39 Russell King - ARM Linux
    • [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39 Russell King - ARM Linux
    • [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39 Linus Walleij
      • [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39 Russell King - ARM Linux
      • [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39 Linus Walleij
      • [GIT PULL] u300, ux500 and Nomadik changes for v2.6.39 Linus Walleij
• [PATCH] ARM: tegra: harmony: Register and configure WM8903 IRQ GPIO Stephen Warren
• [PATCH 0/2] omap2+: Few mux patches Tony Lindgren
  • [PATCH 1/2] omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected Tony Lindgren
  • [PATCH 2/2] omap4: mux: Remove duplicate mux modes Tony Lindgren
    • [PATCH 2/2] omap4: mux: Remove duplicate mux modes Cousson, Benoit
      • [PATCH 2/2] omap4: mux: Remove duplicate mux modes Tony Lindgren
      • [PATCH 2/2] omap4: mux: Remove duplicate mux modes Cousson, Benoit
• compiling 2.6.37 kernel in THUMB2 mode vb at vsbe.com
  • compiling 2.6.37 kernel in THUMB2 mode vb at vsbe.com
    • compiling 2.6.37 kernel in THUMB2 mode Dave Martin
      • compiling 2.6.37 kernel in THUMB2 mode vb at vsbe.com
      • compiling 2.6.37 kernel in THUMB2 mode Vincent Palatin
      • compiling 2.6.37 kernel in THUMB2 mode vb at vsbe.com
• [PATCH 00/10] ux500: support for snowball board. mathieu.poirier at linaro.org
  • [PATCH 01/10] ux500: Introducing foundation for snowball board. mathieu.poirier at linaro.org
    • [PATCH 01/10] ux500: Introducing foundation for snowball board. Arnd Bergmann
  • [PATCH 02/10] ux500: Adding new board files for snowball. mathieu.poirier at linaro.org
    • [PATCH 02/10] ux500: Adding new board files for snowball. Arnd Bergmann
      • [PATCH 02/10] ux500: Adding new board files for snowball. Russell King - ARM Linux
  • [PATCH 03/10] ux500: Adding custom pin configuration file for snowball. - Adding dependency in Makefile. - Adding init function call to board-snowball.c - New header file. mathieu.poirier at linaro.org
  • [PATCH 04/10] ux500: Adding sdi support on snowball. mathieu.poirier at linaro.org
    • [PATCH 04/10] ux500: Adding sdi support on snowball. Arnd Bergmann
  • [PATCH 05/10] smsc911x: use shifted register access mathieu.poirier at linaro.org
    • [PATCH 05/10] smsc911x: use shifted register access Linus Walleij
  • [PATCH 06/10] ux500: added snowball-netev with latest fixes mathieu.poirier at linaro.org
    • [PATCH 06/10] ux500: added snowball-netev with latest fixes Arnd Bergmann
      • [PATCH 06/10] ux500: added snowball-netev with latest fixes Alessandro Rubini
  • [PATCH 07/10] ux500: added snowball-digio.c mathieu.poirier at linaro.org
    • [PATCH 07/10] ux500: added snowball-digio.c Arnd Bergmann
  • [PATCH 08/10] ux500: hooking up netdev and digio to compilation. mathieu.poirier at linaro.org
    • [PATCH 08/10] ux500: hooking up netdev and digio to compilation. Arnd Bergmann
  • [PATCH 09/10] ux500: Addressing irq header file dependency for snowball. mathieu.poirier at linaro.org
    • [PATCH 09/10] ux500: Addressing irq header file dependency for snowball. Arnd Bergmann
      • [PATCH 09/10] ux500: Addressing irq header file dependency for snowball. Linus Walleij
  • [PATCH 10/10] ux500: adding config file options for snowball board. mathieu.poirier at linaro.org
    • [PATCH 10/10] ux500: adding config file options for snowball board. Arnd Bergmann
• [PATCH 0/5] S5PC210/S5PV310/EXYNOS4 interrupts update Kukjin Kim
• [PATCH] arm: Fix .size directive for xscale_dma_a0_map_area Ben Hutchings
• [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver Grant Likely
  • [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver Abhijeet Dharmapurikar
    • [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver Grant Likely
      • [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver Mark Brown
      • [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver Grant Likely
• [PATCH V2] OMAP4: Intialize IVA Device in addition to DSP device. Shweta Gulati
  • [PATCH V2] OMAP4: Intialize IVA Device in addition to DSP device. Menon, Nishanth
    • [PATCH V2] OMAP4: Intialize IVA Device in addition to DSP device. Kevin Hilman
• [PATCH] arm: mach-kirkwood: add led in sheevaplug-setup.c Robin Becker
  • [PATCH] arm: mach-kirkwood: add led in sheevaplug-setup.c Peter Korsgaard
• [PATCH 09/10] MCDE: Add build files and bus Rob Clark
  • [PATCH 09/10] MCDE: Add build files and bus Marcus Lorentzon
    • [PATCH 09/10] MCDE: Add build files and bus Rob Clark
• [PATCH 00/20] world-writable files in sysfs and debugfs Vasiliy Kulikov
  • [Security] [PATCH 00/20] world-writable files in sysfs and debugfs Andrew Morton
  • [PATCH 00/20] world-writable files in sysfs and debugfs James Bottomley
    • [Security] [PATCH 00/20] world-writable files in sysfs and debugfs Greg KH
      • [Security] [PATCH 00/20] world-writable files in sysfs and debugfs James Bottomley
      • [Security] [PATCH 00/20] world-writable files in sysfs and debugfs Greg KH
      • [Security] [PATCH 00/20] world-writable files in sysfs and debugfs James Bottomley
      • [Security] [PATCH 00/20] world-writable files in sysfs and debugfs Vasiliy Kulikov
      • [Security] [PATCH 00/20] world-writable files in sysfs and debugfs James Bottomley
• [RFC PATCH 0/5] OMAP2+ / Panda implementation for async platform_data Andy Green
  • [RFC PATCH 1/5] OMAP2+: Panda introduce async platform data definition Andy Green
    • [RFC PATCH 1/5] OMAP2+: Panda introduce async platform data definition Greg KH
  • [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper Andy Green
    • [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper Arnd Bergmann
      • [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper Andy Green
      • [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper Premi, Sanjeev
      • [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper Andy Green
    • [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper Roger Quadros
      • [RFC PATCH 2/5] OMAP2+: add cpu id register to MAC address helper Andy Green
  • [RFC PATCH 3/5] OMAP2+:Common CPU DIE ID reading code reads wrong registers for OMAP4430 Andy Green
    • [RFC PATCH 3/5] OMAP2+:Common CPU DIE ID reading code reads wrong registers for OMAP4430 Tony Lindgren
  • [RFC PATCH 4/5] OMAP2+: Set onboard Ethernet MAC address using unique CPU ID data Andy Green
  • [RFC PATCH 5/5] USBNET: SMSC95XX: if mac set in platform data no need for random one Andy Green
• [PATCH] OMAP4: PM: remove redundant #ifdef CONFIG_PM Nishanth Menon
  • [PATCH] OMAP4: PM: remove redundant #ifdef CONFIG_PM Kevin Hilman
• [PATCH 1/2] i2c-pxa2xx: Fix register offsets Vasily Khoruzhick
  • [PATCH 2/2] i2c-pxa2xx: Don't clear isr bits too early Vasily Khoruzhick
  • [PATCH 1/2] i2c-pxa2xx: Fix register offsets Sebastian Andrzej Siewior
  • [PATCH 1/2] i2c-pxa2xx: Fix register offsets Ben Dooks
• [PATCH v2 0/6] ARM: PXA: Z2: Zipit Z2 improvements series Vasily Khoruzhick
  • [PATCH v2 1/6] ARM: PXA: Z2: Use only power button as wake source Vasily Khoruzhick
  • [PATCH v2 2/6] ARM: PXA: Z2: Fix battery pdata Vasily Khoruzhick
  • [PATCH v2 3/6] ARM: PXA: Z2: Fix libertas init/tear down sequences Vasily Khoruzhick
  • [PATCH v2 4/6] ARM: PXA: Z2: Keep kbd backlight disabled by default Vasily Khoruzhick
  • [PATCH v2 5/6] ARM: PXA: Z2: Add default triggers for LEDs Vasily Khoruzhick
  • [PATCH v2 6/6] ARM: PXA: Z2: Use switch event for lid Vasily Khoruzhick
  • [PATCH v2 0/6] ARM: PXA: Z2: Zipit Z2 improvements series Marek Vasut
• [PULL] PXA marex/devel-fix Marek Vasut
• [PATCH] DM644x EVM: register MUSB device earlier Sergei Shtylyov
  • [PATCH] DM644x EVM: register MUSB device earlier Felipe Balbi
    • [PATCH] DM644x EVM: register MUSB device earlier Kevin Hilman
      • [PATCH] DM644x EVM: register MUSB device earlier Nori, Sekhar
      • [PATCH] DM644x EVM: register MUSB device earlier Russell King - ARM Linux
      • [PATCH] DM644x EVM: register MUSB device earlier Nori, Sekhar
      • [PATCH] DM644x EVM: register MUSB device earlier Sergei Shtylyov
    • [PATCH] DM644x EVM: register MUSB device earlier Sergei Shtylyov
      • [PATCH] DM644x EVM: register MUSB device earlier Felipe Balbi
      • [PATCH] DM644x EVM: register MUSB device earlier Sergei Shtylyov
      • [PATCH] DM644x EVM: register MUSB device earlier Felipe Balbi
      • [PATCH] DM644x EVM: register MUSB device earlier Felipe Balbi
• [PATCH] pxa2xx_spi: Fix race condition in stop_queue() Vasily Khoruzhick
• [PATCH V12 3/4] ptp: Added a clock driver for the IXP46x. Krzysztof Halasa
• [PATCH 0/4] [rfc v3] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM Simon Horman
  • [PATCH 1/4] mmc: tmio_mmc: Move some defines into a shared header Simon Horman
  • [PATCH 2/4] mmc, ARM: Rename SuperH Mobile ARM zboot helpers Simon Horman
  • [PATCH 3/4] mmc: Add MMC_PROGRESS_* Simon Horman
  • [PATCH 4/4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM Simon Horman
    • [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM Simon Horman
      • [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM Magnus Damm
      • [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM Simon Horman
      • [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM Magnus Damm
      • [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM Simon Horman
      • [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM Magnus Damm
      • [PATCH 4/4 v4] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM Simon Horman
      • [PATCH 4/4 v5] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM Simon Horman
• [PATCH] mtd/mxc_nand: add support for multiple chips on V21 devices Baruch Siach
  • [PATCH] mtd/mxc_nand: add support for multiple chips on V21 devices Baruch Siach
  • [PATCH] mtd/mxc_nand: add support for multiple chips on V21 devices Sascha Hauer
• [PATCH v2 0/4] S5PC210/S5PV310/EXYNOS4 interrupts update Marek Szyprowski
  • [PATCH 1/4] ARM: EXYNOS4: Add missing GPYx banks. Marek Szyprowski
  • [PATCH 2/4] ARM: Samsung: cleanup S5P gpio interrupt code Marek Szyprowski
  • [PATCH 3/4] ARM: Samsung: add function to register gpio interrupt bank data Marek Szyprowski
  • [PATCH 4/4] ARM: EXYNOS4: add support for gpio interrupts Marek Szyprowski
  • [PATCH v2 0/4] S5PC210/S5PV310/EXYNOS4 interrupts update Kukjin Kim
• [PATCH v2] ARM: EXYNOS4: add a placeholder for board specific interrupts Marek Szyprowski
  • [PATCH v2] ARM: EXYNOS4: add a placeholder for board specific interrupts Kukjin Kim
    • [PATCH v2] ARM: EXYNOS4: add a placeholder for board specific interrupts Kyungmin Park
• [PATCH] ARM: imx/mx25: add NAND chip select pins to iomux Baruch Siach
• [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms Richard Zhu
  • [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms Jeff Garzik
  • [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms Sascha Hauer
    • [RFC PATCH 1/2] AHCI Add the AHCI SATA feature on MX53 platforms Zhu Richard-R65037
• [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO Richard Zhu
  • [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO Jeff Garzik
  • [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO Sascha Hauer
    • [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO Zhu Richard-R65037
  • [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO Sascha Hauer
    • [RFC PATCH 2/2] MX53 Enable the AHCI SATA on MX53 LOCO Zhu Richard-R65037
• [PATCH] arm: cmpxchg syscall should data abort if page not write or not young Po-Yu Chuang
  • [PATCH] arm: cmpxchg syscall should data abort if page not write or not young Russell King - ARM Linux
    • [PATCH] arm: cmpxchg syscall should data abort if page not write or not young Po-Yu Chuang
  • [PATCH v2] arm: cmpxchg syscall should data abort if page not write Po-Yu Chuang
    • [PATCH v2] arm: cmpxchg syscall should data abort if page not write Po-Yu Chuang
    • [PATCH v2] arm: cmpxchg syscall should data abort if page not write Nicolas Pitre
      • [PATCH v2] arm: cmpxchg syscall should data abort if page not write Ashwin Chaugule
      • [PATCH v2] arm: cmpxchg syscall should data abort if page not write Nicolas Pitre
      • [PATCH v2] arm: cmpxchg syscall should data abort if page not write Po-Yu Chuang
      • [PATCH v2] arm: cmpxchg syscall should data abort if page not write Nicolas Pitre
      • [PATCH v2] arm: cmpxchg syscall should data abort if page not write Po-Yu Chuang
• [PATCH] arm: plat-omap: iommu: fix request_mem_region() error path Aaro Koskinen
  • [PATCH] arm: plat-omap: iommu: fix request_mem_region() error path Hiroshi DOYU
    • [PATCH] arm: plat-omap: iommu: fix request_mem_region() error path Tony Lindgren
• [PATCH v2 0/1] ARM: QQ2440 machine architecture Domenico Andreoli
• [PATCH v2 1/1] Add core support for QQ2440. Domenico Andreoli
  • [PATCH v2 1/1] Add core support for QQ2440. Jamie Iles
  • [PATCH v2 1/1] Add core support for QQ2440. Lars-Peter Clausen
• [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type Sanjeev Premi
  • [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type Jarkko Nikula
    • [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type Jarkko Nikula
      • [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type Premi, Sanjeev
      • [PATCH] omap3: alsa-soc: Remove restrictive check for cpu type Premi, Sanjeev
• [PATCH v2 0/2] CS89x0: add QQ2440 networking support Domenico Andreoli
  • [PATCH v2 0/2] CS89x0: add QQ2440 networking support David Miller
• [PATCH v2 1/2] CS89x0: Finish transition to CS89x0_NONISA_IRQ Domenico Andreoli
• [PATCH v2 2/2] CS89x0: Add networking support for QQ2440 Domenico Andreoli
• [PATCH 1/7] davinci: move DM64XX_VDD3P3V_PWDN to devices.c Manjunath Hadli
  • [PATCH 1/7] davinci: move DM64XX_VDD3P3V_PWDN to devices.c Hadli, Manjunath
• [PATCH 2/7] davinci: eliminate use of IO_ADDRESS() on sysmod Manjunath Hadli
  • [PATCH 2/7] davinci: eliminate use of IO_ADDRESS() on sysmod Sergei Shtylyov
  • [PATCH 2/7] davinci: eliminate use of IO_ADDRESS() on sysmod Arnd Bergmann
    • [PATCH 2/7] davinci: eliminate use of IO_ADDRESS() on sysmod Nori, Sekhar
      • [PATCH 2/7] davinci: eliminate use of IO_ADDRESS() on sysmod Arnd Bergmann
• [PATCH 3/7] davinci: dm644x: Replace register base value with a defined macro Manjunath Hadli
• [PATCH 4/7] davinci: dm644x: change vpfe capture structure variables for consistency Manjunath Hadli
• [PATCH 5/7] davinci: dm644x: move vpfe init from soc to board specific files Manjunath Hadli
• [PATCH 6/7] davinci: dm644x: add support for v4l2 video display Manjunath Hadli
• [PATCH 7/7] davinci: dm644x EVM: add support for VPBE display Manjunath Hadli
• [PATCH] omap: zoom: host should not pull up wl1271's irq line Ohad Ben-Cohen
  • [PATCH] omap: zoom: host should not pull up wl1271's irq line Tony Lindgren
• [PATCH] ARM: mx5: fix clk id for a few DEFINE_CLOCK Shawn Guo
  • [PATCH] ARM: mx5: fix clk id for a few DEFINE_CLOCK Sascha Hauer
• [PATCH] mmc: change CONFIG of MMC_SDHCI based drivers from 'bool' to 'tristate' Shawn Guo
• [RFC][PATCH v2 00/23] __vmalloc: Propagating GFP allocation flag inside __vmalloc(). Prasad Joshi
• [RFC][PATCH v2 02/23] (armho) __vmalloc: add gfp flags variant of pte and pmd allocation Prasad Joshi
• [GIT PULL] davinci platform updates for 2.6.39 Kevin Hilman
• [PATCH 1/2] ARM: mx5/babbage: Remove unneeded gpio_set_value call Fabio Estevam
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Fabio Estevam
  • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Uwe Kleine-König
    • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Julia Lawall
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Uwe Kleine-König
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Julia Lawall
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Wolfram Sang
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Uwe Kleine-König
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Julia Lawall
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Fabio Estevam
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Julia Lawall
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Wolfram Sang
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Julia Lawall
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Julia Lawall
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Grant Likely
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Julia Lawall
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Grant Likely
      • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Julia Lawall
• [RFC][PATCH v2 23/23] __vmalloc: add gfp flags variant of pte, pmd, and pud allocation Prasad Joshi
• [PATCH][Trivial] ARM: Remove duplicate linux/sched.h include from arch/arm/plat-iop/time.c Jesper Juhl
• [PATCH] ARM: Remove bouncing author email from arch/arm/plat-iop/time.c Jesper Juhl
  • [PATCH] ARM: Remove bouncing author email from arch/arm/plat-iop/time.c Russell King - ARM Linux
• [PATCH 1/1] ARM: mx53_loco: Add GPIO Keypad support Frank Li
  • [PATCH 1/1] ARM: mx53_loco: Add GPIO Keypad support Uwe Kleine-König
    • [PATCH 1/1] ARM: mx53_loco: Add GPIO Keypad support Li Frank-B20596
• [PATCH V1] mx51 enchance the sd/mmc HW timing compatibility on mx51 boards. Richard Zhu
  • [PATCH V1] mx51 enchance the sd/mmc HW timing compatibility on mx51 boards. Sascha Hauer
• [PATCH 00/11] Support for msm8660 and msm8960 dma Jeff Ohlstein
  • [PATCH 02/11] msm: dma: Add support for flushing dma channels Jeff Ohlstein
  • [PATCH 03/11] msm: dma: support using dma from modules Jeff Ohlstein
  • [PATCH 04/11] msm: dma: Toggle adm_pclk along with adm_clk Jeff Ohlstein
  • [PATCH 05/11] msm: dma: Remove register macros from header file Jeff Ohlstein
  • [PATCH 06/11] msm: dma: use a platform device for msm_dmov Jeff Ohlstein
  • [PATCH 07/11] msm: dma: Support multiple adms Jeff Ohlstein
  • [PATCH 08/11] msm: dma: Handle probe failure in dma function Jeff Ohlstein
  • [PATCH 09/11] msm: dma: Support msm8x60 dma Jeff Ohlstein
  • [PATCH 10/11] msm: 8960: Split out common initialization code Jeff Ohlstein
  • [PATCH 11/11] msm: dma: support msm8960 dma Jeff Ohlstein
• [PATCH 01/11] msm: dma: Guard for multiple file inclusion Jeff Ohlstein
• [PATCH] ARM: EXYNOS4 NURI: Add MAX8997 support (MFD+Regulator+RTC) MyungJoo Ham
  • [PATCH] ARM: EXYNOS4 NURI: Add MAX8997 support (MFD+Regulator+RTC) Kukjin Kim
    • [PATCH] ARM: EXYNOS4 NURI: Add MAX8997 support (MFD+Regulator+RTC) MyungJoo Ham
• [PATCH 1/1 v2] ARM: mx53_loco: Add GPIO Keypad support Frank Li
  • [PATCH 1/1 v2] ARM: mx53_loco: Add GPIO Keypad support Uwe Kleine-König
    • [PATCH 1/1 v2] ARM: mx53_loco: Add GPIO Keypad support Li Frank-B20596
• [PATCH 1/1 v3] ARM: mx53_loco: Add GPIO Keypad support Frank Li
• [PATCHv2 0/9] macb: add support for Cadence GEM Jamie Iles
  • [PATCHv2 0/9] macb: add support for Cadence GEM David Miller
    • [PATCHv2 0/9] macb: add support for Cadence GEM Nicolas Ferre
      • [PATCHv2 0/9] macb: add support for Cadence GEM Jamie Iles
      • [PATCHv2 0/9] macb: add support for Cadence GEM Jean-Christophe PLAGNIOL-VILLARD
      • [PATCHv2 0/9] macb: add support for Cadence GEM Jamie Iles
      • [PATCHv2 0/9] macb: add support for Cadence GEM Jamie Iles
• [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name Jamie Iles
  • [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name Jean-Christophe PLAGNIOL-VILLARD
    • [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name Jamie Iles
  • [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name avictor.za at gmail.com
    • [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name Russell King - ARM Linux
      • [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name Andrew Victor
      • [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name Russell King - ARM Linux
      • [PATCHv2 1/9] at91: provide macb clks with "pclk" and "hclk" name Jamie Iles
• [PATCHv2 2/9] macb: remove conditional clk handling Jamie Iles
• [PATCHv2 3/9] macb: unify at91 and avr32 platform data Jamie Iles
  • [PATCHv2 3/9] macb: unify at91 and avr32 platform data Peter Korsgaard
    • [PATCHv2 3/9] macb: unify at91 and avr32 platform data Jamie Iles
    • [PATCHv2 3/9] macb: unify at91 and avr32 platform data Jean-Christophe PLAGNIOL-VILLARD
    • [PATCHv2 3/9] macb: unify at91 and avr32 platform data avictor.za at gmail.com
      • [PATCHv2 3/9] macb: unify at91 and avr32 platform data Peter Korsgaard
      • [PATCHv2 3/9] macb: unify at91 and avr32 platform data Russell King - ARM Linux
      • [PATCHv2 3/9] macb: unify at91 and avr32 platform data Peter Korsgaard
      • [PATCHv2 3/9] macb: unify at91 and avr32 platform data Jamie Iles
      • [PATCHv2 3/9] macb: unify at91 and avr32 platform data Jamie Iles
      • [PATCHv2 3/9] macb: unify at91 and avr32 platform data Russell King - ARM Linux
      • [PATCHv2 3/9] macb: unify at91 and avr32 platform data Jamie Iles
      • [PATCHv2 3/9] macb: unify at91 and avr32 platform data Russell King - ARM Linux
      • [PATCHv2 3/9] macb: unify at91 and avr32 platform data Nicolas Ferre
• [PATCHv2 4/9] macb: convert printk to netdev_ and friends Jamie Iles
  • [PATCHv2 4/9] macb: convert printk to netdev_ and friends Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2 5/9] macb: initial support for Cadence GEM Jamie Iles
• [PATCHv2 6/9] macb: support higher rate GEM MDIO clock divisors Jamie Iles
• [PATCHv2 7/9] macb: support statistics for GEM devices Jamie Iles
• [PATCHv2 8/9] macb: support DMA bus widths > 32 bits Jamie Iles
• [PATCHv2 9/9] macb: allow GEM to have configurable receive buffer size Jamie Iles
• [PATCH v17 00/13] davinci vpbe: dm6446 v4l2 driver Manjunath Hadli
  • [PATCH v17 00/13] davinci vpbe: dm6446 v4l2 driver Hadli, Manjunath
    • [PATCH v17 00/13] davinci vpbe: dm6446 v4l2 driver Nori, Sekhar
• [PATCH v15 01/13] davinci vpbe: V4L2 display driver for DM644X SoC Manjunath Hadli
• [PATCH v15 02/13] davinci vpbe: VPBE display driver Manjunath Hadli
• [PATCH v15 03/13] davinci vpbe: OSD(On Screen Display) block Manjunath Hadli
• [GIT PULL] Samsung S5P for 2.6.39 merge window Kukjin Kim
  • [GIT PULL] Samsung S5P for 2.6.39 merge window Russell King - ARM Linux
• [PATCH v15 04/13] davinci vpbe: VENC( Video Encoder) implementation Manjunath Hadli
• [PATCH v15 05/13] davinci vpbe: Build infrastructure for VPBE driver Manjunath Hadli
• [PATCH v15 06/13] davinci vpbe: Readme text for Dm6446 vpbe Manjunath Hadli
• [PATCH v17 07/13] davinci: move DM64XX_VDD3P3V_PWDN to devices.c Manjunath Hadli
• [PATCH v17 08/13] davinci: eliminate use of IO_ADDRESS() on sysmod Manjunath Hadli
  • [PATCH v17 08/13] davinci: eliminate use of IO_ADDRESS() on sysmod Nori, Sekhar
    • [PATCH v17 08/13] davinci: eliminate use of IO_ADDRESS() on sysmod Arnd Bergmann
      • [PATCH v17 08/13] davinci: eliminate use of IO_ADDRESS() on sysmod Nori, Sekhar
• [PATCH v17 09/13] davinci: dm644x: Replace register base value with a defined macro Manjunath Hadli
• [PATCH v17 10/13] davinci: dm644x: change vpfe capture structure variables for consistency Manjunath Hadli
  • [PATCH v17 10/13] davinci: dm644x: change vpfe capture structure variables for consistency Nori, Sekhar
• [PATCH v17 11/13] davinci: dm644x: move vpfe init from soc to board specific files Manjunath Hadli
• [PATCH v17 12/13] davinci: dm644x: add support for v4l2 video display Manjunath Hadli
  • [PATCH v17 12/13] davinci: dm644x: add support for v4l2 video display Nori, Sekhar
• [PATCH v17 13/13] davinci: dm644x EVM: add support for VPBE display Manjunath Hadli
  • [PATCH v17 13/13] davinci: dm644x EVM: add support for VPBE display Nori, Sekhar
• When does mach-types get updated in a tree? John Linn
  • When does mach-types get updated in a tree? Russell King - ARM Linux
    • When does mach-types get updated in a tree? John Linn
• [PATCH 0/4] Fix ST-Ericsson Ux500 specific PL022 & PL180 amba devices Philippe Langlais
  • [PATCH 4/4] ux500: pass name for db5500-spi & db8500v2-sdi devices Philippe Langlais
• [PATCH 1/4] amba: add name based matching Philippe Langlais
  • [PATCH 1/4] amba: add name based matching Russell King - ARM Linux
    • [PATCH 1/4] amba: add name based matching Linus Walleij
    • [PATCH 1/4] amba: add name based matching Linus Walleij
      • [PATCH 1/4] amba: add name based matching Russell King - ARM Linux
      • [PATCH 1/4] amba: add name based matching Linus Walleij
• [PATCH 2/4] amba-pl022: Add loopback support for the SPI on 5500 Philippe Langlais
• [PATCH 3/4] mmci/pl180: Support for db8500v2. ST-Ericsson modified ARM PrimeCell PL180 block has not got an updated corresponding amba-id, althought the IP block has changed in db8500v2. The change was done to the datactrl register. Philippe Langlais
• [RFC PATCHv2 00/20] A15 architected timer support Marc Zyngier
  • [RFC PATCHv2 01/20] ARM: architected timers: move local timer support to percpu_timer.c Marc Zyngier
  • [RFC PATCHv2 03/20] ARM: exynos4: remove stubbed twd_timer_setup call Marc Zyngier
  • [RFC PATCHv2 04/20] ARM: shmobile: remove stubbed twd_timer_setup call Marc Zyngier
  • [RFC PATCHv2 05/20] ARM: tegra: remove stubbed twd_timer_setup call Marc Zyngier
  • [RFC PATCHv2 06/20] ARM: ux500: remove stubbed twd_timer_setup call Marc Zyngier
  • [RFC PATCHv2 07/20] ARM: versatile: remove stubbed twd_timer_setup call Marc Zyngier
  • [RFC PATCHv2 08/20] ARM: remove unused twd_timer_setup stub Marc Zyngier
  • [RFC PATCHv2 09/20] ARM: architected timers: add A15 architected timers Marc Zyngier
  • [RFC PATCHv2 10/20] ARM: Platform dependent sched_clock() override Marc Zyngier
  • [RFC PATCHv2 11/20] ARM: architected timers: Add A15 specific sched_clock implementation Marc Zyngier
  • [RFC PATCHv2 12/20] ARM: versatile/vexpress: rework timer support Marc Zyngier
  • [RFC PATCHv2 13/20] ARM: msm: dynamically register local timer setup function Marc Zyngier
  • [RFC PATCHv2 14/20] ARM: omap4: dynamically register local timer setup function Marc Zyngier
    • [RFC PATCHv2 14/20] ARM: omap4: dynamically register local timersetup function Santosh Shilimkar
      • [RFC PATCHv2 14/20] ARM: omap4: dynamically register local timersetup function Marc Zyngier
      • [RFC PATCHv2 14/20] ARM: omap4: dynamically register local timersetup function Santosh Shilimkar
  • [RFC PATCHv2 15/20] ARM: exynos4: dynamically register local timer setup function Marc Zyngier
  • [RFC PATCHv2 16/20] ARM: shmobile: dynamically register local timer setup function Marc Zyngier
  • [RFC PATCHv2 17/20] ARM: tegra: dynamically register local timer setup function Marc Zyngier
  • [RFC PATCHv2 18/20] ARM: ux500: dynamically register local timer setup function Marc Zyngier
  • [RFC PATCHv2 19/20] ARM: simplify percpu_timer_setup Marc Zyngier
  • [RFC PATCHv2 20/20] ARM: simplify percpu_timer_ack Marc Zyngier
• [RFC PATCHv2 02/20] ARM: omap2: remove stubbed twd_timer_setup call Marc Zyngier
• [GIT PULL] final davinci updates for 2.6.39 Kevin Hilman
• One quick question about SMP on ARM Catalin Marinas
• [PATCH] ARMv7: Flush the vectors page using the base address Catalin Marinas
  • [PATCH] ARMv7: Flush the vectors page using the base address Russell King - ARM Linux
    • [PATCH] ARMv7: Flush the vectors page using the base address Catalin Marinas
• [PATCH 2/2] i.MX25: add sdma clock definitions Michael Trimarchi
• pxa27x/spitz: serials in recent kernels Pavel Machek
• [PATCH 3 00/18] I2C: OMAP1: OMAP2+: I2C fixes, removal of cpu_is... from driver Andy Green
  • [PATCH 3 01/18] OMAP2+: hwmod data: Set hwmod flags to only allow 16-bit accesses to i2c Andy Green
  • [PATCH 3 02/18] I2C: OMAP2+: Name registers in I2C IP V2 only accordingly Andy Green
  • [PATCH 3 03/18] I2C: OMAP2+: Introduce I2C IP versioning constants Andy Green
  • [PATCH 3 04/18] I2C: OMAP2+: hwmod data: Tag all OMAP2+ hwmod definitions with I2C IP revision Andy Green
  • [PATCH 3 05/18] I2C: OMAP: add rev to omap i2c platform data Andy Green
  • [PATCH 3 06/18] I2C: OMAP1: set IP revision in platform data Andy Green
  • [PATCH 3 07/18] I2C: OMAP2+: Pass hwmod rev knowledge via platform_data when i2c bus added Andy Green
  • [PATCH 3 08/18] I2C: OMAP2+: use platform_data ip revision to select register map Andy Green
  • [PATCH 3 09/18] I2C: OMAP2+: Solve array bounds overflow error on i2c idle Andy Green
  • [PATCH 3 10/18] I2C: OMAP2+: address confused probed version naming Andy Green
  • [PATCH 3 11/18] I2C: OMAP2+: increase omap_i2c_dev_attr flags from u8 to u32 Andy Green
  • [PATCH 3 12/18] I2C: OMAP1/OMAP2+: add flags field to omap i2c platform data Andy Green
  • [PATCH 3 13/18] I2C: OMAP2+: Pass flags up to omap i2c platform_data as well Andy Green
  • [PATCH 3 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test Andy Green
  • [PATCH 3 15/18] OMAP2+: hwmod data: add correct functionality flags to all omap2plus i2c dev_attr Andy Green
  • [PATCH 3 16/18] I2C: OMAP1: set i2c unit feature implementation flags in platform data Andy Green
  • [PATCH 3 17/18] I2C: OMAP2+: Convert omap I2C driver to use feature implementation flags from platform data Andy Green
  • [PATCH 3 18/18] I2C: OMAP1/OMAP2+: prepend I2C IP version to probed version shown in dev_info Andy Green
  • [PATCH 3 00/18] I2C: OMAP1: OMAP2+: I2C fixes, removal of cpu_is... from driver Tony Lindgren
    • [PATCH 3 00/18] I2C: OMAP1: OMAP2+: I2C fixes, removal of cpu_is... from driver Andy Green
• [PATCH v3] ARM: add QQ2440 machine architecture Domenico Andreoli
• [PATCH 02/13] plat-spear: use list_move() instead of list_del()/list_add() combination Kirill A. Shutemov
  • [PATCH 02/13] plat-spear: use list_move() instead of list_del()/list_add() combination viresh kumar
• ARM Tegra updates for 2.6.39 Colin Cross
• [PATCH 0/7] add the GPMI controller driver for IMX23/IMX28 Huang Shijie
  • [PATCH 1/7] ARM: add GPMI support for imx23/imx28 Huang Shijie
    • [PATCH 1/7] ARM: add GPMI support for imx23/imx28 Lothar Waßmann
  • [PATCH 2/7] add the common code for GPMI driver Huang Shijie
    • [PATCH 2/7] add the common code for GPMI driver =?utf-8?Q?Lothar_Wa=C3=9Fmann?=
      • [PATCH 2/7] add the common code for GPMI driver Huang Shijie
  • [PATCH 3/7] add the database for the NANDs Huang Shijie
  • [PATCH 4/7] add GPMI support for imx23 Huang Shijie
  • [PATCH 5/7] add GPMI support for imx28 Huang Shijie
    • [PATCH 5/7] add GPMI support for imx28 Lothar Waßmann
      • [PATCH 5/7] add GPMI support for imx28 Huang Shijie
      • [PATCH 5/7] add GPMI support for imx28 Lothar Waßmann
      • [PATCH 5/7] add GPMI support for imx28 Florian Fainelli
  • [PATCH 6/7] dmaengine: change the flags of request_irq() Huang Shijie
    • [PATCH 6/7] dmaengine: change the flags of request_irq() Lothar Waßmann
      • 答复: [PATCH 6/7] dmaengine: change the flags of request_irq() Huang Shijie-B32955
      • [PATCH 6/7] dmaengine: change the flags of request_irq() Huang Shijie
  • [PATCH 7/7] MTD : add GPMI driver in the config and Makefile Huang Shijie
• [PATCH 0/7] add the GPMI controller driver for IMX23/IMX28 Huang Shijie
  • [PATCH 1/7] ARM: add GPMI support for imx23/imx28 Huang Shijie
  • [PATCH 2/7] add the common code for GPMI driver Huang Shijie
  • [PATCH 3/7] add the database for the NANDs Huang Shijie
    • [PATCH 3/7] add the database for the NANDs Florian Fainelli
  • [PATCH 4/7] add GPMI support for imx23 Huang Shijie
  • [PATCH 5/7] add GPMI support for imx28 Huang Shijie
  • [PATCH 6/7] dmaengine: change the flags of request_irq() Huang Shijie
  • [PATCH 7/7] MTD : add GPMI driver in the config and Makefile Huang Shijie
  • [PATCH 0/7] add the GPMI controller driver for IMX23/IMX28 Artem Bityutskiy
    • [PATCH 0/7] add the GPMI controller driver for IMX23/IMX28 Huang Shijie-B32955
    • [PATCH 0/7] add the GPMI controller driver for IMX23/IMX28 Huang Shijie
• [PATCH] ARM: EXYNOS4: Add Atmel mXT touchscreen device to the NURI board Joonyoung Shim
• [PATCHv2] omap3: alsa-soc: Remove restrictive checks for cpu type Premi, Sanjeev
• [PATCHv2] omap3: alsa-soc: Remove restrictive checks for cpu type Sanjeev Premi
• [PATCH v4 3/6] ARM: mxs: dynamically allocate mmc device Uwe Kleine-König
• [PATCH V12 0/4] ptp: IEEE 1588 hardware clock support Richard Cochran
• [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation Will Deacon
  • [PATCH 2/2] ARM: perf: add required isbs() to ARMv7 backend Will Deacon
    • [PATCH 2/2] ARM: perf: add required isbs() to ARMv7 backend Jean Pihet
      • [PATCH 2/2] ARM: perf: add required isbs() to ARMv7 backend Will Deacon
      • [PATCH 2/2] ARM: perf: add required isbs() to ARMv7 backend Will Deacon
  • [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation Jean Pihet
    • [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation Will Deacon
    • [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation Will Deacon
• PATCH [1/1] Clock support for VT8500/WM8505 Arnd Bergmann
• [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value Aaro Koskinen
  • [PATCH 2/2] arm: mach-omap2: omap_l3_smx: fix irq handler setup Aaro Koskinen
    • [PATCH 2/2] arm: mach-omap2: omap_l3_smx: fix irq handler setup Santosh Shilimkar
  • [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value Santosh Shilimkar
    • [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value Cousson, Benoit
      • [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value Santosh Shilimkar
      • [PATCH 1/2] arm: mach-omap2: devices: fix omap3_l3_init() return value Tony Lindgren
• [PATCHv3 1/3] ARM: mx51: Add entry for gpc_dvfs_clk Dinh.Nguyen at freescale.com
  • [PATCHv3 1/3] ARM: mx51: Add entry for gpc_dvfs_clk Sascha Hauer
• [PATCHv3 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI Dinh.Nguyen at freescale.com
  • [PATCHv3 3/3] ARM: mx51: Add support for low power suspend on MX51 Dinh.Nguyen at freescale.com
    • [PATCHv3 3/3] ARM: mx51: Add support for low power suspend on MX51 Sascha Hauer
      • [PATCHv3 3/3] ARM: mx51: Add support for low power suspend on MX51 Arnaud Patard (Rtp)
    • [PATCHv3 3/3] ARM: mx51: Add support for low power suspend on MX51 Lothar Waßmann
  • [PATCHv3 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI Sascha Hauer
    • [PATCHv3 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI Nguyen Dinh-R00091
      • [PATCHv3 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI Uwe Kleine-König
  • [PATCHv3 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI Russell King - ARM Linux
• [PATCH] ARM: Use generic BUG() handler Simon Glass
  • Questions about this patch: [PATCH] ARM: Use generic BUG() handler anish kumar
    • Questions about this patch: [PATCH] ARM: Use generic BUG() handler Simon Glass
• [PATCH] ARM: mxs: fix naming of struct holding info for mxs-i2c devices Uwe Kleine-König
• [PATCH 1/4] ARM: mx5/babbage: Use gpio_request_one in babbage_fec_reset Fabio Estevam
  • [PATCH 2/4] ARM: mx5/babbage: Use gpio_request_one in babbage_usbhub_reset Fabio Estevam
    • [PATCH 3/4] ARM: mx5/mx53_evk: Use gpio_request_one in mx53_evk_fec_reset Fabio Estevam
      • [PATCH 4/4] ARM: mx5/mx53_evk: Make the reset pin name more meaningful Fabio Estevam
    • [PATCH 2/4] ARM: mx5/babbage: Use gpio_request_one in babbage_usbhub_reset Uwe Kleine-König
  • [PATCH 1/4] ARM: mx5/babbage: Use gpio_request_one in babbage_fec_reset Uwe Kleine-König
• [PATCH 1/7] ARM: add GPMI support for imx23/imx28 Huang Shijie
  • [PATCH 1/7] ARM: add GPMI support for imx23/imx28 Lothar Waßmann
    • [PATCH 1/7] ARM: add GPMI support for imx23/imx28 Huang Shijie
• [PM8921 MFD V3 0/6] pmic8921 core and subdevices adharmap at codeaurora.org
  • [PM8921 MFD V3 1/6] mfd: pm8921: Add PMIC 8921 core driver adharmap at codeaurora.org
  • [PM8921 MFD V3 2/6] mfd: pm8xxx: Add irq support adharmap at codeaurora.org
  • [PM8921 MFD V3 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver adharmap at codeaurora.org
  • [PM8921 MFD V3 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver adharmap at codeaurora.org
  • [PM8921 MFD V3 5/6] MAINTAINERS: Add patterns for pmic 8921 files to MSM subsystem adharmap at codeaurora.org
  • [PM8921 MFD V3 6/6] msm: board-8960: Add support for pm8921 adharmap at codeaurora.org
• [PATCH 2/3] ep93xx: add /proc/cpuinfo extension Martin Guy
  • [PATCH 2/3] ep93xx: add /proc/cpuinfo extension H Hartley Sweeten
• [PATCH V6 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS Richard Zhu
  • [PATCH V6 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs Richard Zhu
    • [PATCH V6 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs Wolfram Sang
      • [PATCH V6 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs Zhu Richard-R65037
  • [PATCH V6 4/4] mmc: sdhci-esdhc: enable esdhc on imx53 Richard Zhu
• [PATCH V6 2/4] mmc: add the abort CMDTYE bits definition Richard Zhu
• reboot/kexec in 2.6.38 Pavel Machek
  • reboot/kexec in 2.6.38 Eric Miao
    • reboot/kexec in 2.6.38 Cyril Hrubis
      • reboot/kexec in 2.6.38 Eric W. Biederman
    • reboot/kexec in 2.6.38 Cyril Hrubis
• [PATCH V1 1/3] ahci_platform: add two clk pointer member into ahci_platform_data struct Richard Zhu
  • [PATCH V1 1/3] ahci_platform: add two clk pointer member into ahci_platform_data struct Sascha Hauer
    • [PATCH V1 1/3] ahci_platform: add two clk pointer member into ahci_platform_data struct Zhu Richard-R65037
• [PATCH V1 2/3] AHCI Add the AHCI SATA feature on MX53 platforms Richard Zhu
  • [PATCH V1 2/3] AHCI Add the AHCI SATA feature on MX53 platforms Sascha Hauer
• [PATCH V1 3/3] MX53 Enable the AHCI SATA on MX53 LOCO Richard Zhu
• [PATCH 1/2] s5pc110: add clock gate for MIPI-DSI controller. Kukjin Kim
  • [PATCH 1/2] s5pc110: add clock gate for MIPI-DSI controller. InKi Dae
• [PATCH 2/2] s5pc110: add MIPI-DSI controller driver. Kukjin Kim
  • [PATCH 2/2] s5pc110: add MIPI-DSI controller driver. InKi Dae
• [PATCH V2 1/2] AHCI Add the AHCI SATA feature on MX53 platforms Richard Zhu
  • [PATCH V2 2/2] MX53 Enable the AHCI SATA on MX53 LOCO Richard Zhu
• [PM8921 MFD V3 2/6] mfd: pm8xxx: Add irq support Thomas Gleixner
• Why don't we have atomic_set_mask()? KyongHo Cho
  • Why don't we have atomic_set_mask()? Russell King - ARM Linux
    • Why don't we have atomic_set_mask()? Detlef Vollmann
  • Why don't we have atomic_set_mask()? Russell King - ARM Linux
    • Why don't we have atomic_set_mask()? KyongHo Cho
• [PATCH 1/2] ARM: mxc: Add dummy_get_cycles to avoid access before init is done Jan Weitzel
• [PATCH 2/2] ARM: mxc: Add sched_clock to mxc platform Jan Weitzel
• [PATCH] omap3: beaglexm: fix user button. Javier Martin
  • [PATCH] omap3: beaglexm: fix user button. Koen Kooi
  • [PATCH] omap3: beaglexm: fix user button. Sergei Shtylyov
• [PATCH v4 0/7] Switch ARM platforms from integrator-flash to physmap Marc Zyngier
  • [PATCH v4 1/7] MTD: Add integrator-flash feature to physmap Marc Zyngier
  • [PATCH v4 2/7] ARM: Realview: Use physmap driver instead of integrator-flash Marc Zyngier
  • [PATCH v4 3/7] ARM: Versatile: Use physmap driver instead of integrator-flash Marc Zyngier
  • [PATCH v4 4/7] ARM: VExpress: Use physmap driver instead of integrator-flash Marc Zyngier
  • [PATCH v4 5/7] ARM: Integrator/AP: Use physmap driver instead of integrator-flash Marc Zyngier
  • [PATCH v4 6/7] ARM: Integrator/CP: Use physmap driver instead of integrator-flash Marc Zyngier
  • [PATCH v4 7/7] MTD: Remove integrator-flash Marc Zyngier
• [PATCH 0/9] Support for NXP LPC2K SoCs Ithamar R. Adema
  • [PATCH 1/9] lpc2k: Core support Ithamar R. Adema
    • [PATCH 1/9] lpc2k: Core support Jamie Iles
    • [PATCH 1/9] lpc2k: Core support Vitaly Wool
      • [PATCH 1/9] lpc2k: Core support Ithamar R. Adema
    • [PATCH 1/9] lpc2k: Core support Kevin Wells
      • [PATCH 1/9] lpc2k: Core support Ithamar R. Adema
  • [PATCH 2/9] lpc2k: Exception vector handling Ithamar R. Adema
    • [PATCH 2/9] lpc2k: Exception vector handling Uwe Kleine-König
      • [PATCH 2/9] lpc2k: Exception vector handling Ithamar R. Adema
      • [PATCH 2/9] lpc2k: Exception vector handling Greg Ungerer
  • [PATCH 3/9] lpc2k: clk API Ithamar R. Adema
    • [PATCH 3/9] lpc2k: clk API Kevin Wells
      • [PATCH 3/9] lpc2k: clk API Ithamar R. Adema
    • [PATCH 3/9] lpc2k: clk API Kevin Wells
      • [PATCH 3/9] lpc2k: clk API Ithamar R. Adema
  • [PATCH 4/9] lpc2k: generic time and clockevents Ithamar R. Adema
    • [PATCH 4/9] lpc2k: generic time and clockevents Jamie Iles
      • [PATCH 4/9] lpc2k: generic time and clockevents Ithamar R. Adema
  • [PATCH 5/9] lpc2k: gpiolib Ithamar R. Adema
  • [PATCH 6/9] lpc2k: multifunction pin configuration Ithamar R. Adema
  • [PATCH 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board Ithamar R. Adema
    • [PATCH 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board Kevin Wells
      • [PATCH 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board Ithamar R. Adema
    • [PATCH 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board Kevin Wells
      • [PATCH 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board Ithamar R. Adema
  • [PATCH 8/9] lpc2k: Add UART, SSP, and MCI devices Ithamar R. Adema
  • [PATCH 9/9] lpc2k: defconfig for NXP LPC2K platform Ithamar R. Adema
  • [PATCH 0/9] Support for NXP LPC2K SoCs Kevin Wells
  • [PATCH 0/9] Support for NXP LPC2K SoCs Greg Ungerer
• [PATCH v2 1/4] ARM: mx5/babbage: Use gpio_request_one in babbage_fec_reset Fabio Estevam
• [PATCH v2 2/4] ARM: mx5/babbage: Use gpio_request_one in babbage_usbhub_reset Fabio Estevam
  • [PATCH v2 2/4] ARM: mx5/babbage: Use gpio_request_one in babbage_usbhub_reset Uwe Kleine-König
• [PATCH v2 3/4] ARM: mx5/mx53_evk: Use gpio_request_one in mx53_evk_fec_reset Fabio Estevam
  • [PATCH v2 4/4] ARM: mx5/mx53_evk: Make the reset pin name more meaningful Fabio Estevam
• [Git pull] MSM for v2.6.39 David Brown
  • [Git pull] MSM for v2.6.39 Daniel Walker
    • [Git pull] MSM for v2.6.39 David Brown
• [PATCH 0/3] ARM: OMAP2+: gpmc warning fixes Balaji T K
  • [PATCH 1/3] ARM: OMAP2+: correct GPMC IRQ Balaji T K
  • [PATCH 2/3] ARM: OMAP2+: GPMC set dummy irq chip Balaji T K
  • [PATCH 3/3] ARM: OMAP4: correct GPMC IRQ number Balaji T K
  • [PATCH 0/3] ARM: OMAP2+: gpmc warning fixes Tony Lindgren
• [PM8921 MFD V3 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver Grant Likely
  • [PM8921 MFD V3 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver Abhijeet Dharmapurikar
    • [PM8921 MFD V3 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver Grant Likely
• [PATCH] ARM: S3C24XX: H1940: RX1950: Change default LED triggers Vasily Khoruzhick
• [GIT PULL] omap changes for v2.6.39 merge window Tony Lindgren
  • [GIT PULL] omap changes for v2.6.39 merge window Linus Torvalds
    • [GIT PULL] omap changes for v2.6.39 merge window Tony Lindgren
    • [GIT PULL] omap changes for v2.6.39 merge window Russell King - ARM Linux
      • [GIT PULL] omap changes for v2.6.39 merge window Uwe Kleine-König
  • [GIT PULL] omap changes for v2.6.39 merge window Linus Torvalds
    • [GIT PULL] omap changes for v2.6.39 merge window Tony Lindgren
      • [GIT PULL] omap changes for v2.6.39 merge window Ohad Ben-Cohen
      • [GIT PULL] omap changes for v2.6.39 merge window Tony Lindgren
• [PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx. Grant Likely
• [PATCH] msm: iommu: Use relaxed register access functions Stepan Moskovchenko
  • [PATCH] msm: iommu: Use relaxed register access functions Daniel Walker
• [PATCH 1/2] msm: Add gpio support for 8960 Rohit Vaswani
  • [PATCH 1/2] msm: Add gpio support for 8960 Rohit Vaswani
• [PATCH] msm: Add gpio support for 8960 Rohit Vaswani
  • [PATCH] msm: Add gpio support for 8960 Daniel Walker
• [PATCH v4] ARM: mx51: Print silicon revision on boot Fabio Estevam
• [PATCH] ARM: Merge v6 and v7 DEBUG_LL DCC support Stephen Boyd
  • [PATCH] ARM: Merge v6 and v7 DEBUG_LL DCC support Russell King - ARM Linux
    • [PATCHv2] ARM: Merge v6 and v7 DEBUG_LL DCC support Stephen Boyd
• [PM8921 MFD V4 6/6] msm: board-8960: Add support for pm8921 adharmap at codeaurora.org
• [PATCH] hwspinlock: depend on OMAP4 Ohad Ben-Cohen
• [PATCH 1/2] drivers/watchdog/s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region Wim Van Sebroeck
  • [PATCH 1/2] drivers/watchdog/s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region Julia Lawall
    • [PATCH 1/2] drivers/watchdog/s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region Wim Van Sebroeck
• [PATCH] MX51: Add AUDMUX ports definitions julien.boibessot at free.fr
• [PATCH V7 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS Richard Zhu
  • [PATCH V7 2/4] mmc: add the abort CMDTYE bits definition Richard Zhu
  • [PATCH V7 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs Richard Zhu
    • [PATCH V7 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs Wolfram Sang
  • [PATCH V7 4/4] mmc: sdhci-esdhc: enable esdhc on imx53 Richard Zhu
• compiling 2.6.37 kernel in THUMB2 mode Vincent Palatin
  • compiling 2.6.37 kernel in THUMB2 mode Russell King - ARM Linux
• [PATCH] ARM: imx: let MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_IMX_SSI Uwe Kleine-König
• [PATCH v3 7/7] tty: add pruss SUART driver Alan Cox
• [PATCH] sound/soc/pxa/zylonite.c: set .codec_dai_name in initializer Antonio Ospite
• [PATCH v3 7/7] tty: add pruss SUART driver Arnd Bergmann
• [PATCH 1/4] ARM i.MX: remove duplicated #include Huang Weiyi
• [PATCH 2/4] ARM: S5P: remove duplicated #include Huang Weiyi
• [PATCH v2 0/9] Support for NXP LPC2K SoCs Ithamar R. Adema
  • [PATCH v2 1/9] lpc2k: Core support Ithamar R. Adema
    • [PATCH v2 1/9] lpc2k: Core support Russell King - ARM Linux
      • [PATCH v2 1/9] lpc2k: Core support Ithamar R. Adema
  • [PATCH v2 2/9] lpc2k: Exception vector handling Ithamar R. Adema
    • [PATCH v2 2/9] lpc2k: Exception vector handling Russell King - ARM Linux
      • [PATCH v2 2/9] lpc2k: Exception vector handling Ithamar R. Adema
  • [PATCH v2 3/9] lpc2k: clk API Ithamar R. Adema
  • [PATCH v2 4/9] lpc2k: generic time and clockevents Ithamar R. Adema
    • [PATCH v2 4/9] lpc2k: generic time and clockevents Russell King - ARM Linux
      • [PATCH v2 4/9] lpc2k: generic time and clockevents Ithamar R. Adema
      • [PATCH v2 4/9] lpc2k: generic time and clockevents Kevin Wells
      • [PATCH v2 4/9] lpc2k: generic time and clockevents Ithamar R. Adema
  • [PATCH v2 5/9] lpc2k: gpiolib Ithamar R. Adema
  • [PATCH v2 6/9] lpc2k: multifunction pin configuration Ithamar R. Adema
    • [PATCH v2 6/9] lpc2k: multifunction pin configuration Kevin Wells
      • [PATCH v2 6/9] lpc2k: multifunction pin configuration Ithamar R. Adema
  • [PATCH v2 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board Ithamar R. Adema
    • [PATCH v2 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board Russell King - ARM Linux
      • [PATCH v2 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board Ithamar R. Adema
  • [PATCH v2 8/9] lpc2k: Add UART, SSP, and MCI devices Ithamar R. Adema
  • [PATCH v2 9/9] lpc2k: defconfig for NXP LPC2K platform Ithamar R. Adema
• [PATCHv4 1/3] ARM: mx51: Add entry for gpc_dvfs_clk Dinh.Nguyen at freescale.com
• [PATCHv4 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI Dinh.Nguyen at freescale.com
  • [PATCHv4 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI Fabio Estevam
    • [PATCHv4 2/3] ARM: mx51: Implement code to allow mx51 to enter WFI Nguyen Dinh-R00091
• [PATCHv4 3/3] ARM: mx51: Add support for low power suspend on MX51 Dinh.Nguyen at freescale.com
  • [PATCHv4 3/3] ARM: mx51: Add support for low power suspend on MX51 Russell King - ARM Linux
    • [PATCHv4 3/3] ARM: mx51: Add support for low power suspend on MX51 Nguyen Dinh-R00091
      • [PATCHv4 3/3] ARM: mx51: Add support for low power suspend on MX51 Russell King - ARM Linux
• [RFC][PATCH v3 21/22] mm, arm: add gfp flags variant of pmd and pte allocations Prasad Joshi
• [PATCH] msm: uncompress.h: Fix putc unused warning Stephen Boyd
• [PATCH 00/20] video: msm: Adding Support for MDP3.1 Carl Vanderlip
  • [PATCH 01/20] video: msm: Fix typo 'mpd'->'mdp' Carl Vanderlip
    • [PATCH 01/20] video: msm: Fix typo 'mpd'->'mdp' Janorkar, Mayuresh
      • [PATCH 01/20] video: msm: Fix typo 'mpd'->'mdp' Carl Vanderlip
  • [PATCH 02/20] video: msm: add spinlock to mdp_info struct Carl Vanderlip
  • [PATCH 03/20] video: msm: add locked_enable_mdp_irq function Carl Vanderlip
  • [PATCH 04/20] video: msm: Move clk to mdp_info struct Carl Vanderlip
  • [PATCH 05/20] video: msm: Setup framework for multiple output interfaces Carl Vanderlip
  • [PATCH 06/20] video: msm: Simplify mdp_blit function Carl Vanderlip
  • [PATCH 07/20] video: msm: Allow users to request a larger x and y virtual fb Carl Vanderlip
    • [PATCH 07/20] video: msm: Allow users to request a larger x and y virtual fb Janorkar, Mayuresh
      • [PATCH 07/20] video: msm: Allow users to request a larger x and y virtual fb Russell King - ARM Linux
      • [PATCH 07/20] video: msm: Allow users to request a larger x and y virtual fb Carl Vanderlip
  • [PATCH 08/20] video: msm: Refactor mdp_regs Carl Vanderlip
    • [PATCH 08/20] video: msm: Refactor mdp_regs Janorkar, Mayuresh
      • [PATCH 08/20] video: msm: Refactor mdp_regs Bryan Huntsman
      • [PATCH 08/20] video: msm: Refactor mdp_regs Brian Swetland
  • [PATCH 09/20] video: msm: Split out MDP2.2 HW specific code. Carl Vanderlip
    • [PATCH 09/20] video: msm: Split out MDP2.2 HW specific code. Russell King - ARM Linux
      • [PATCH 09/20] video: msm: Split out MDP2.2 HW specific code. Carl Vanderlip
    • [PATCH 09/20] video: msm: Split out MDP2.2 HW specific code. Janorkar, Mayuresh
    • [PATCH 09/20] video: msm: Split out MDP2.2 HW specific code. Daniel Walker
      • [PATCH 09/20] video: msm: Split out MDP2.2 HW specific code. Dima Zavin
  • [PATCH 10/20] video: msm: Separate more MDP HW specific code Carl Vanderlip
  • [PATCH 11/20] video: msm: Add MDP FB DMA configuration Carl Vanderlip
    • [PATCH 11/20] video: msm: Add MDP FB DMA configuration Janorkar, Mayuresh
  • [PATCH 12/20] video: msm: Add IRQ callback for MDP interface Carl Vanderlip
  • [PATCH 13/20] video: msm: Debugging for send_blit Carl Vanderlip
    • [PATCH 13/20] video: msm: Debugging for send_blit Janorkar, Mayuresh
  • [PATCH 14/20] video: msm: Write IRQ mask to MDP registers Carl Vanderlip
  • [PATCH 15/20] video: msm: convert printk to pr_* Carl Vanderlip
    • [PATCH 15/20] video: msm: convert printk to pr_* Janorkar, Mayuresh
    • [PATCH 15/20] video: msm: convert printk to pr_* Sergei Shtylyov
  • [PATCH 16/20] video: msm: Set the EBI1 clock to 128MHz when performing blits Carl Vanderlip
    • [PATCH 16/20] video: msm: Set the EBI1 clock to 128MHz when performing blits zt.tmzt at gmail.com
    • [PATCH 16/20] video: msm: Set the EBI1 clock to 128MHz when performing blits Stephen Boyd
  • [PATCH 17/20] video: msm: Prevent framebuffer glitch during initialization Carl Vanderlip
    • [PATCH 17/20] video: msm: Prevent framebuffer glitch during initialization Sergei Shtylyov
      • [PATCH 17/20] video: msm: Prevent framebuffer glitch during initialization Carl Vanderlip
  • [PATCH 18/20] video: msm: Prevent DMA lockups when switching bit depths Carl Vanderlip
    • [PATCH 18/20] video: msm: Prevent DMA lockups when switching bit depths Sergei Shtylyov
  • [PATCH 19/20] video: msm: Separate calculation of base and offset Carl Vanderlip
  • [PATCH 20/20] video: msm: Add support for MDP 3.1 (qsd8k) Carl Vanderlip
• [PATCH] ARM: kernel/sleep.S: fix Thumb2 compilation issues Nicolas Pitre
  • [PATCH] ARM: kernel/sleep.S: fix Thumb2 compilation issues Dave Martin
• [PATCH V12 0/4] ptp: IEEE 1588 hardware clock support Richard Cochran
• Support for ARM940T core Samsung S3C2510A MCU under Linux Arnd Bergmann
  • Support for ARM940T core Samsung S3C2510A MCU under Linux Greg Ungerer
    • Support for ARM940T core Samsung S3C2510A MCU under Linux Arnd Bergmann
      • Support for ARM940T core Samsung S3C2510A MCU under Linux Greg Ungerer
• [PATCH] ARM: mxc: fix buggy '.end' of IORESOURCE_MEM in device codes Shawn Guo
  • [PATCH] ARM: mxc: fix buggy '.end' of IORESOURCE_MEM in device codes Wolfram Sang
  • [PATCH] ARM: mxc: fix buggy '.end' of IORESOURCE_MEM in device codes Uwe Kleine-König
• [Q] Booting kernel from NFS? Chen Wenjie
  • [Q] Booting kernel from NFS? Baurzhan Ismagulov
    • [Q] Booting kernel from NFS? Steve Chen
• Updated mach-types update Russell King - ARM Linux
  • Updated mach-types update Russell King - ARM Linux
  • Updated mach-types update Detlef Vollmann
    • Updated mach-types update Russell King - ARM Linux
      • Updated mach-types update Detlef Vollmann
• [GIT PULL] pxa: patches for 2.6.39 Eric Miao
  • [GIT PULL] pxa: patches for 2.6.39 Russell King - ARM Linux
• [PATCH v3 0/9] Support for NXP LPC2K SoCs Ithamar R. Adema
  • [PATCH v3 1/9] lpc2k: Core support Ithamar R. Adema
  • [PATCH v3 2/9] lpc2k: Exception vector handling Ithamar R. Adema
  • [PATCH v3 3/9] lpc2k: clk API Ithamar R. Adema
    • [PATCH v3 3/9] lpc2k: clk API Kevin Wells
      • [PATCH v3 3/9] lpc2k: clk API Ithamar R. Adema
  • [PATCH v3 4/9] lpc2k: generic time and clockevents Ithamar R. Adema
  • [PATCH v3 5/9] lpc2k: gpiolib Ithamar R. Adema
  • [PATCH v3 6/9] lpc2k: multifunction pin configuration Ithamar R. Adema
  • [PATCH v3 7/9] lpc2k: Add EmbeddedArtists LPC2478 Developer's Kit board Ithamar R. Adema
  • [PATCH v3 8/9] lpc2k: Add UART, SSP, and MCI devices Ithamar R. Adema
• [PATCH v3 9/9] lpc2k: defconfig for NXP LPC2K platform Ithamar R. Adema
• [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Wolfram Sang
  • [PATCH 2/2] ARM: mx5/mx53_evk: Remove unneeded gpio_set_value call Julia Lawall
• [PATCH V7 0/4] mmc: one comment is missing addressed in the previous review. Richard Zhu
  • [PATCH V7 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS Richard Zhu
  • [PATCH V7 2/4] mmc: add the abort CMDTYE bits definition Richard Zhu
  • [PATCH V7 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs Richard Zhu
  • [PATCH V7 4/4] mmc: sdhci-esdhc: enable esdhc on imx53 Richard Zhu
• [PATCH V7 0/4] mmc: one comment is missing addressed. Richard Zhu
  • [PATCH V7 2/4] mmc: add the abort CMDTYE bits definition Richard Zhu
• [PATCH V7 1/4] mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from ESDHC_DEFAULT_QUIRKS Richard Zhu
• [PATCH V7 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs Richard Zhu
  • [PATCH V7 3/4] mmc: sdhci-esdhc: make the writel/readl as the general APIs Wolfram Sang
• [PATCH V7 4/4] mmc: sdhci-esdhc: enable esdhc on imx53 Richard Zhu
  • [PATCH V7 4/4] mmc: sdhci-esdhc: enable esdhc on imx53 Wolfram Sang
• Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()" Barry Song
  • Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()" Eric Miao
    • Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()" Russell King - ARM Linux
      • Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()" Eric Miao
  • Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()" Russell King - ARM Linux
    • Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()" Barry Song
      • Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()" Russell King - ARM Linux
      • Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()" Barry Song
• Booting Integrator/AP with ARM920T Linus Walleij
  • Booting Integrator/AP with ARM920T Russell King - ARM Linux
• Build warning in todays linus/master Jamie Iles
  • Build warning in todays linus/master Will Deacon
    • Build warning in todays linus/master Jamie Iles
  • Build warning in todays linus/master Russell King - ARM Linux
• [PATCH v4 08/19] ARM: LPAE: Introduce the 3-level page table format definitions Catalin Marinas
  • [PATCH v4 08/19] ARM: LPAE: Introduce the 3-level page table format definitions Russell King - ARM Linux
    • [PATCH v4 08/19] ARM: LPAE: Introduce the 3-level page table format definitions Catalin Marinas
• i.MX31 suspend and VSTBY question Helmut Raiger
  • i.MX31 suspend and VSTBY question Nguyen Dinh-R00091
    • i.MX31 suspend and VSTBY question Helmut Raiger
      • i.MX31 suspend and VSTBY question Nguyen Dinh-R00091
• Enable UART3 on TX28 Lothar Waßmann
  • Enable UART3 on TX28 Arnd Bergmann
    • Enable UART3 on TX28 Lothar Waßmann
• [PATCH] ARM: mxs Enable UART3 on TX28 Lothar Waßmann
  • [PATCH] ARM: mxs: Enable SPI-GPIO support on TX28 Lothar Waßmann
    • [PATCH] ARM: mxs: TX28: Change pwm backlight max_brightness to 100 Lothar Waßmann
      • [PATCH] ARM: mxs: TX28: Add support for first Flexcan port on STK5-V3 base board and second Flexcan port on STK5-V4 Lothar Waßmann
• [PATCH 1/2] ARM: mxs: configure and register the second FEC device on TX28/STK5-V4 Lothar Waßmann
  • [PATCH 2/2] ARM: mxs: TX28: Setup MAC addresses for both FEC MACs from OTP fuses. Lothar Waßmann
    • [PATCH 2/2] ARM: mxs: TX28: Setup MAC addresses for both FEC MACs from OTP fuses. Shawn Guo
      • [PATCH 2/2] ARM: mxs: TX28: Setup MAC addresses for both FEC MACs from OTP fuses. Lothar Waßmann
• [PATCHv2 4/4] msm: scm: Get cacheline size from CTR Stephen Boyd
• dma cache coherency issue Dongas
  • dma cache coherency issue Russell King - ARM Linux
    • dma cache coherency issue Dongas
• [PATCH 2/2] ARM: perf: add required isbs() to ARMv7 backend Jean Pihet
  • [PATCH 2/2] ARM: perf: add required isbs() to ARMv7 backend Will Deacon
• [PATCHv5 1/4] ARM: mx50: Add support to get the silicon revision Dinh.Nguyen at freescale.com
• [PATCHv5 2/4] ARM: mx51: Add entry for gpc_dvfs_clk Dinh.Nguyen at freescale.com
  • [PATCHv5 3/4] ARM: mx51: Implement code to allow mx51 to enter WFI Dinh.Nguyen at freescale.com
• [PATCHv5 4/4] ARM: mx51: Add support for low power suspend on MX51 Dinh.Nguyen at freescale.com
  • [PATCHv5 4/4] ARM: mx51: Add support for low power suspend on MX51 Sascha Hauer
• [PATCH v2] ARM:boot:device tree: Allow the device tree binary to be appended to zImage John Bonesio
  • [PATCH v2] ARM:boot:device tree: Allow the device tree binary to be appended to zImage Nicolas Pitre
    • [PATCH v2] ARM:boot:device tree: Allow the device tree binary to be appended to zImage John Bonesio
      • [PATCH v2] ARM:boot:device tree: Allow the device tree binary to be appended to zImage Nicolas Pitre
• [PATCH] ARM: Use asm-generic/sizes.h Stephen Boyd
  • [PATCH] ARM: Use asm-generic/sizes.h Arnd Bergmann
    • [PATCH] ARM: Use asm-generic/sizes.h Russell King - ARM Linux
      • [PATCH] ARM: Use asm-generic/sizes.h Arnd Bergmann
      • [PATCH] ARM: Use asm-generic/sizes.h Guan Xuetao
      • [PATCH] ARM: Use asm-generic/sizes.h Stephen Boyd
      • [PATCH] ARM: Use asm-generic/sizes.h Guan Xuetao
      • [PATCH] ARM: Use asm-generic/sizes.h Stephen Boyd
      • [PATCH] ARM: Use asm-generic/sizes.h Paul Mundt
      • [PATCH] ARM: Use asm-generic/sizes.h Guan Xuetao
      • [PATCH] ARM: Use asm-generic/sizes.h Sam Ravnborg
• [PATCH v2 09/13] can: pruss CAN driver. Subhasish Ghosh
• Single-stepping ARMv7 with KDB... Andrei Warkentin
  • Single-stepping ARMv7 with KDB... Will Deacon
• [PATCH] msm: board-msm8960: Add USB peripheral and OTG support Anji jonnala
  • [PATCH] msm: board-msm8960: Add USB peripheral and OTG support Sergei Shtylyov
• [PATCH] ARM: pxafb: Fix access to nonexistent member of pxafb_info Marek Vasut
  • [PATCH] ARM: pxafb: Fix access to nonexistent member of pxafb_info Vasily Khoruzhick
    • [PATCH] ARM: pxafb: Fix access to nonexistent member of pxafb_info Marek Vasut
      • [PATCH] ARM: pxafb: Fix access to nonexistent member of pxafb_info Vasily Khoruzhick
• Support for ARM940T core Samsung S3C2510A MCU under Linux Arnd Bergmann
• [PATCH] Input: tca6416-keypad: Change to module_init() Magnus Damm
  • [PATCH] Input: tca6416-keypad: Change to module_init() Mark Brown
    • [PATCH] Input: tca6416-keypad: Change to module_init() Paul Mundt
      • [PATCH] Input: tca6416-keypad: Change to module_init() Magnus Damm
      • [PATCH] Input: tca6416-keypad: Change to module_init() Paul Mundt
      • [PATCH] Input: tca6416-keypad: Change to module_init() Magnus Damm
      • [PATCH] Input: tca6416-keypad: Change to module_init() Paul Mundt
      • [PATCH] Input: tca6416-keypad: Change to module_init() Magnus Damm
      • [PATCH] Input: tca6416-keypad: Change to module_init() Mark Brown
      • [PATCH] Input: tca6416-keypad: Change to module_init() Magnus Damm
      • [PATCH] Input: tca6416-keypad: Change to module_init() Mark Brown
      • [PATCH] Input: tca6416-keypad: Change to module_init() Magnus Damm
      • [PATCH] Input: tca6416-keypad: Change to module_init() Mark Brown
    • [PATCH] Input: tca6416-keypad: Change to module_init() Magnus Damm
• [PATCH] arm: handle ptrace requests to change PC during interrupted system calls Arnd Bergmann
• Updated mach-types update Russell King - ARM Linux
  • Updated mach-types update Domenico Andreoli
  • Updated mach-types update H Hartley Sweeten
• [PATCH] ARM: memmap: only free allocated memmap entries when using SPARSEMEM Will Deacon
• [PATCH] ARM: S5PV210: Fix security engine interrupt names Vladimir Zapolskiy
• Single-stepping ARMv7 with KDB... Andrei Warkentin
  • Single-stepping ARMv7 with KDB... Will Deacon
• [PATCH V7 02/17] SPEAr13xx: Add PCIe host controller base driver support. Viresh Kumar
  • [PATCH V7 02/17] SPEAr13xx: Add PCIe host controller base driver support. Arnd Bergmann
• [PATCH 0/6] use AMBA periphid for hardcoding Linus Walleij
• [PATCH 1/6] mach-netx: delete hardcoded periphid Linus Walleij
• [PATCH 2/6] mach-ux500: delete SSP PrimeCell ID Linus Walleij
• [PATCH 3/6] amba: make hardcoded periphid override hardware Linus Walleij
• [PATCH 4/6] mach-ux500: force PrimeCell revisions Linus Walleij
• [PATCH 5/6] spi/pl022: Add loopback support for the SPI on 5500 Linus Walleij
• [PATCH 6/6] mmci: support for ST-Ericsson db8500v2 Linus Walleij
• [PATCH 1/4] davinci: psc.h: clean up indentation done using spaces Sekhar Nori
• [PATCH 2/4] davinci: enable forced transitions on PSC Sekhar Nori
  • [PATCH 3/4] davinci: da850: add support for SATA interface Sekhar Nori
    • [PATCH 3/4] davinci: da850: add support for SATA interface Sergei Shtylyov
• [PATCH 4/4] davinci: da850 evm: register SATA device Sekhar Nori
• [PATCH 1/2] davinci: mityomapl138: Use correct id for NAND controller Michael Williamson
  • [PATCH 2/2] davinci: mityomapl138: Use auto-probe to determine attached PHY ID Michael Williamson
• multiple definition of show_mem for pxa Jonathan Cameron
• [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation Jean Pihet
  • [PATCH 1/2] ARM: perf: reset counters on all CPUs during initialisation Will Deacon
• [PATCH v2] ARM: perf: reset counters on all CPUs during initialisation Will Deacon
• [PATCH] ARM: perf: ensure overflows aren't missed due to IRQ latency Will Deacon
  • [PATCH] ARM: perf: ensure overflows aren't missed due to IRQ latency Jamie Iles
• [PATCH][KERNEL] Add support for CPLD regs and CF cards in kernel 2.6.38 Marek Vasut
• [PATCH] ARM: perf: ensure overflows aren't missed due to IRQ latency Ashwin Chaugule
  • [PATCH] ARM: perf: ensure overflows aren't missed due to IRQ latency Will Deacon
• [PATCH 0/2] Fix resource size miscalculations Joe Perches
• [trivial PATCH 1/2] treewide: Fix iomap resource size miscalculations Joe Perches
• [trivial PATCH 2/2] arm: mach-u300/gpio: Fix mem_region resource size miscalculations Joe Perches

Last message date: Wed Mar 23 15:55:37 EDT 2011
Archived on: Wed Mar 23 15:56:08 EDT 2011

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

---

This archive was generated by Pipermail 0.09 (Mailman edition).